Products

DUR-A-GLAZE® ESD PRIMER is a 2-component, 100% solids Static Dissipative Primer. This coating was designed as a concrete primer for DUR-A-GARD ESD. It provides a static dissipative reading of 10⁶ -10⁹ Ω/sq. It provides an average of 14v Body Voltage Generation when utilizing dissipative footwear. Resistance readings are consistent for the life of the floor and are independent of ambient humidity.

DUR-A-TEX UM PRIMER is a zero VOC, cementitious urethane coating designed for use as a primer under DUR-A-TEX UM urethane mortar utilizing DUR-A-TEX UM resin and hardener and a DUR-A-TEX UM PRIMER aggregate.

ACCELERA® EXT is part a of DUR-A-FLEX’s family of fast-track, seamless floor systems. It is specially designed to provide a longer working time than regular ACCELERA to facilitate applications in larger areas. It is a two-component proprietary blend of polymers featuring a fastcuring resin and hardener. ACCELERA EXT is UV stable and offers excellent stain resistance, it may be used anywhere standard ACCELERA is specified. It is a s a low-odor resin and hardener and is available clear or pre-pigmented.

DUR-A-TEX LMS PRIMER is zero VOC, onecomponent acrylic polymers designed for use as primer for FLEXLINE LM PLUS MORTAR. It is used as a primer over sealed (nonabsorptive) substrates.

DUR-A-WALL HP GRIPPER PRIMER is a 100% acrylic latex primer-sealer with excellent adhesion to new wallboard, sheetrock, and gypsum board. It seals surfaces for uniform finish coat application, texture, gloss, and color. It is part of DUR-A-FLEX DUR-A-WALL HP wall systems.

DUR-A-GLAZE® MVP PRIMER is a clear, 100% solids epoxy moisture mitigation system formulated to bond to concrete with relative humidity (RH) as high as 99% (at 40% depth). It is designed to reduce moisture vapor emission levels up to 20lbs/1000 sq. ft./24 hours to 3 lbs/1000 sq. ft./24 hours or less.

DUR-A-GLAZE® NO. 4 WB PRIMER R is a water-borne, two component, epoxy designed to prime new or existing concrete floors.

ACCELERA® SATIN FINISH TOPCOAT is a part of the ACCELERA family of fast-track, seamless floor systems. It is a two component proprietary blend of polymers featuring a fast-curing clear, satin finish. It is applied as a final topcoat over a grout coated ACCELERA decorative vinyl chip or quartz broadcast floor systems. It is UV stable and offers excellent chemical resistance.

Dur-A-Flex CRYL-A-PRIME P-101 is a 100% reactive, fast curing, high strength, methyl methacrylate (MMA) based, acrylic reactive resin. It is formulated to form a cohesive bond with the substrate. This system cannot be thinned with solvents.