Duromar

Duromar Brand

Products:8

Duromar pioneers in the field of applied polymeric technology. It offers a wide variety of zero VOC, 100% solids materials for use in a broad spectrum of industrial applications. It manufactures rebuilding, resurfacing, and specialty products for industrial maintenance; concrete repair and flooring systems; high performance linings for the severest corrosive and abrasive environments; and structural adhesives. Its production facilities and quality control procedures are continually being upgraded to provide “state of the art products” to meet today’s stringent standards for quality and performance.

View All Duromar Products

Duromar® DF-1301

Ready to Use Product Type:Epoxy Coating, Sealer, Solventless & High Solids Coating
Compatible Substrates & Surfaces:Concrete
Features:High Solids Content, Low Temperature Curing
Application Method:Roller, Brush, Trowel
Chemical Family:Epoxy & Epoxy Derivatives

Duromar® DF-1301 is a clear, 100% solids concrete sealer with excellent flexibility and moderate chemical resistance. It is used primarily to seal the concrete prior to the application of additional topcoats, to prevent outgassing, and to restore the mechanical properties of old concrete. It can be cured at temperatures as low as 50ºF. Duromar® DF-1301 is a multifunctional epoxy with a uniquely modified cycloaliphatic amine hardener.

Duromar® DF-4301

Ready-to-Use Product Type:Solventless & High Solids Coating, Epoxy Coating
Features:Acid Resistant, Good Solvent Resistance, Alkali Resistant, Chemical Resistant
Application Method:Roller, Brush, Trowel, Spray
Chemical Family:Epoxy & Epoxy Derivatives

Duromar® DF-4301 is a 100% solids, Zero VOC Novolac floor coating with outstanding chemical resistance to acids, bases, and solvents. It is used primarily in secondary containment areas and floors subject to chemical exposure. It can be used in USDA facilities based on FSIS Directive 11,000.4 (Rev. 1), November 24, 1995. Duromar® DF-4301 can be used in combination with DF-4301V for vertical applications on walls and containment berms. Duromar® DF-4301 is a Novolac epoxy with a uniquely modified cycloaliphatic amine hardener.

Duromar® DF-3710

Ready-to-Use Product Type:Top Coat, Elastomeric Coating, Solventless & High Solids Coating
Features:High Elongation, Low Temperature Curing, Flexible, Non-Toxic, Good Bonding Strength
Application Method:Spray, Roller, Brush, Trowel

Duromar® DF-3710 is an elastomeric 100% solids epoxy, which is designed to be used as a flexible topcoat, crack bridging membrane, or joint filler. This flexible layer provides protection to the upper layers when the concrete moves and shifts. It can be overcoated with any of the other DUROMAR linings or maintenance products.

Duromar® HydroFlor®

Ready-to-Use Product Type:Epoxy Coating, Coating, Solventless & High Solids Coating
Compatible Substrates & Surfaces:Concrete
Features:Good Adhesion, Excellent Mechanical Strength, Cleanable, Matte Finish, Anti-Slip, Breathable
Application Method:Roller, Brush, Trowel
Chemical Family:Epoxy & Epoxy Derivatives

Duromar® HydroFlor® is an innovative, zero VOC epoxy floor coating. It has a unique breathable structure, which allows moisture vapor to escape from the concrete. The coating is easy to apply. Duromar® HydroFlor® has a matte, anti-slip finish. It is recommended to first apply HydroFlor® Sealer to prevent outgassing during application. Duromar® HydroFlor® is a multifunctional epoxy, with a uniquely modified amine hardener.

Duromar® HydroFlor® Sealer

Ready-to-Use Product Type:Sealer, Solventless & High Solids Coating, Epoxy Coating
Compatible Substrates & Surfaces:Concrete
Features:Good Adhesion, Breathable, Low Outgassing
Application Method:Roller, Brush
Chemical Family:Epoxy & Epoxy Derivatives

Duromar® HydroFlor® Sealer is an outstanding, easy to apply, zero VOC epoxy floor primer to be used in conjunction with Duromar® HydroFlor® systems or other concrete coatings. The HydroFlor® Sealer is used to seal the surface and to prevent out gassing. Duromar® HydroFlor® Sealer is a multifunctional epoxy with a uniquely modified amine hardener.

Duromar® DF-5610

Ready-to-Use Product Type:Solventless & High Solids Coating
Compatible Substrates & Surfaces:Concrete
Features:Excellent Mechanical Strength, Low Viscosity, Excellent Substrate Adhesion, Excellent Flexibility, Low Temperature Curing, Good UV Stability, Primerless

Duromar® DF-5610 is a 100% solids, Zero VOC impact resistant flooring material. It was engineered to provide exceptional toughness and resiliency. Duromar® DF-5610 will cure as low as 15˚F and provide excellent adhesion to concrete without a primer. It can be used in USDA facilities based on FSIS Directive 11,000.4 (Rev. 1), November 24, 1995. Duromar® DF-5610 is a functional Isocyanate Polyaspartic.

Duromar® DF-7310

Ready to Use Product Type:Solventless & High Solids Coating, Elastomeric Coating, Epoxy Coating
Features:Chemical Resistant, Excellent Substrate Adhesion, Shock Resistant, High Impact Resistance, Abrasion Resistant
Compatible Substrates & Surfaces:Concrete
Application Method:Spray, Roller, Brush
Chemical Family:Epoxy & Epoxy Derivatives

Duromar® DF-7310 is an elastomeric, easy to apply, 100% solids poly-sulfide based epoxy system. It is designed to provide excellent chemical resistance and exceptional adhesion in a flexible membrane that will bridge cracks in aging concrete. Duromar® DF-7310 provides exceptional impact resistance, thermal shock resistance as well as abrasion resistance. It is ideally suited for secondary or primary containment over concrete. Duromar® DF-7310 is a Poly-sulfide based multi-functional epoxide resin with a cycloaliphatic amine curing agent.

Duromar® Durofil

Applications:Fillers, Levellers & Joints, Flooring & Surfaces
Product Families:Mortar & Grouts, Construction Materials
Chemical Family:Epoxy & Epoxy Derivatives

Duromar® Durofil is a specially formulated 100% solids epoxy grout and rebuilding product for filling holes and rebuilding severely chemically attacked concrete floors and secondary containment areas. Duromar® Durofil provides an excellent base for other DUROFLOR® products, such as CHEMCRETE, DF-4301, etc., where more acid resistance or a smoother finish is required.

Knowde Brand Summary

Identification

Chemical Family: Epoxy & Epoxy Derivatives
Product Type: Coating,
Elastomeric Coating,
Epoxy Coating,
Grout,
Sealer,
Solventless & High Solids Coating,
Top Coat
Technologies: Ready-to-Use Products
Product Families: Construction Materials
Mortar & Grouts
Paints & Coatings
Other Paints & Coatings,
Primers & Sealers,
Protective Coatings,
Top Coats

Features & Benefits

Labeling Claims: Odor-free,
Solvent-free,
VOC-free

Applications & Uses

Markets: Building & Construction,
Paints & Coatings
Applications: Building & Construction
Concrete Coatings & Stains
Flooring & Surfaces
Fillers, Levellers & Joints,
Floor Coatings
Application Method: Brush,
Roller,
Spray,
Trowel
Compatible Substrates & Surfaces: Concrete