Ebalta Kunststoff - AH 140TC 90 2 - Epoxy - Laminating

Identification & Functionality

Features & Benefits

Materials Features: High Strength,
Low Viscosity,
Very Good Heat Resistance
Properties: unfilled
very low viscosity
long processing time
high heat resistance
high strength
excellent wet-out characteristics

Applications & Uses

Markets: Automotive & Transportation
Applications: Automotive & Transportation — Automotive
Exterior & Body,
Interior,
Other Automotive Applications
Automotive & Transportation — Transportation
Aerospace & Aviation,
Marine
Plastics & Elastomers End Uses: Aerospace Applications,
Aircraft Applications,
Aircraft Interiors,
Automotive Applications,
Automotive Exterior Parts,
Automotive Interior Parts,
Laminates,
Marine Applications
Plastics & Elastomers Processing Methods: Laminating
Applications: Hand laminating
Vacuum infusion
carbon fiber sight laminates
Laminates for boatbuilding
Laminates for automotive industry
Laminates for aeronautic
Processing Instructions: The temperature of material and processing should be between 18 and 25° C.

The mixing of resin and hardener should be made intensively and if possible without any bubbles at room temperature.

Additonal details for post curing:
Typical curing

24 h at RT

2 - 4 h at 40°C

4 h at 60°C

5 h at 80°C

We recommend a post curing with a temperature rise of about 10°C/hour. Difficult geometries should be supported during the curing cycle. Afterwards the part should be cooled down at about 20°C/hour.

Properties

	Value	Units	Test Method / Conditions
TG in TMA TG	114	°C	—
Viscosity (25°C)	425 ± 75	mPa.s	—
Compressive Strength	115 ± 10	MPa	EN ISO 604
Density (20°C)	1,12 ± 0,02	g/cm3	—
Flexural elongation at break	3000 ± 300	%	EN ISO 178
Flexural elongation at break	6.5 ± 0.2	%	EN ISO 178
Pot Life (200g/20°C)	90 - 105	minutes	—
Curing time at RT	48 - 72	Hrs	—
Flexural strength	130 ± 10	MPa	EN ISO 178
Post Curing	4 - 6 (5 - 6)	Time in h (Temperature in °C)	—
Impact resistance (Charpy)	55 ± 10	kJ/m2	EN ISO 179
Shore hardness	87 ± 3	Shore D	DIN ISO 7619-1

Packaging & Availability

Packages: Resin AH 140 5,000 kg / 10,000 kg / 25,000 kg / 50,000 kg / 220,000 kg

hardener TC 90-2 1,600 kg / 5,000 kg

Storage & Handling

Storing: At appropriate storage 18-25°C.

Occuring crystallization due to disadvantageous storage conditions can be made return by warming up the material at approx. 60° C for some hours.

Opened containers should be closed immediately after use and be protected against moisture. This material should be used up as soon as possible.

Ebalta Kunststoff Gmbh AH 140TC 90 2

Resin	AH 140	5,000 kg / 10,000 kg / 25,000 kg / 50,000 kg / 220,000 kg
hardener	TC 90-2	1,600 kg / 5,000 kg