Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Benefits
- Water-based, environmentally friendly
- Safe, non-flammable
- Fast, hard, air dry
- Clear when dry, opalescent while wet for film gage
- Provides good protection - up to 280 hours resistance to salt spray (baking does not reduce corrosion protection)
- Excellent depth and clarity
- Ready to use, easy application
- Wide range of metal objects can be finished such as fasteners, belt buckles, costume jewelry, hardware and architectural metals.
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Cure Method
- Directions for Use
Recommended film thickness:
Wet: 1.0-3.0 mils.
Dry: 0.5 to 1.5 mils.
Parts may be dipped in the E-LAQ 525 but spray application may be hindered by the viscosity of the product. If diluted with water, spraying will be made easier.
Surfaces must be clean and free of dirt, oil and rust. Although parts wet with water can be dipped into the lacquer, it is best if parts are dried before dipping to avoid dragging too much water into the lacquer. Corrosion properties are best when E-LAQ 525 is used at full strength. 50% (or more) water can be added which will significantly reduce the corrosion protection. Relative humidity, temperature and air flow will affect the drying and film forming characteristics of the coating. Under normal conditions, the water evaporates from the wet coating, leaving the coalescing solvent which flows out from the coating and then evaporates leaving a clear film. Under severe humidity or poor airflow, the coalescing solvent may evaporate before the water. When this occurs, the coating may stay wet and not form a clear film. Keep container closed when not in use as solution surface may develop a film which may be skimmed off.
Solution Concentration
This can be controlled using Zahn Cups. The as is solution will give a time of approximately 52-54 seconds in a #2 cup and 22-24 seconds in a #3 cup.
Removal
The dried coating may be removed with acetone or lacquer thinner.
Properties
- Physical Form
Technical Details & Test Data
- Drying
Touch 20 minutes Handle 30 minutes Pack 12 hours or upon cooling if force driedHardness 2H pencil hardness after drying for 3 hours or after bakingSalt Spray Up to 280 hours Coverage 600-1000 square feet per gallon when used at full strength
Safety & Health
- Caution
E-LAQ 525 contains glycol ethers, which means that even at such low levels, it should be kept away from open flames and be ventilated while using. Skin and eye contact should be avoided.
Storage & Handling
- Storage
Store this product at temperatures above 32F although if frozen it can be thawed.