Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
Satin Wax Emulsion Corrosion Coating
E-Tec 522 is recommended for metal surfaces, i.e. aluminum, steel, stainless steel, copper and galvanized and plated metals, where a waxy coating can be employed to give effective exterior or interior rust protection. E-Tec 522 can be used to coat lightly oiled metal surfaces. Test a sample part to determine adhesion and film-forming properties when applying over lightly oiled or uncleaned surfaces. Since there are various types of oils, we recommend such a pretest for compatibility.- Advantages
- Can be applied over lightly oiled surfaces, eliminates the need for washing
- Dries to a tack-free finish, does not attract or hold dust
- Outstanding adhesion and durability for excellent protection and wearability
- Excellent corrosion control
- Superior dry film lubrication
- Enhances appearance of most surfaces to promote customer satisfaction
- Effective on a wide variety of substrates allowing for one product for many applications
- Nonflammable for safety and VOC compliance
- Provides medium gloss dry film (buffable)
- Easy to apply, liquid at ambient temperatures
- Easily diluted and mixed with water
- Excellent coverage
- Easy to remove with alkaline cleaners
Applications & Uses
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Applications
- Use as a torque reduction and corrosion resistant lubricant on various fasteners
- Use as a corrosion preventive and decorative coating on cast iron
- Use as an anti-graffiti coating over various surfaces including vinyl, rubber, plastic, painted surfaces, metal and other surfaces
- Provides a dry, imperceptible barrier film over various surfaces. Graffiti adheres to the barrier film of E-Tec 522 and not to the coated surface
- Can be easily removed in EPI’s alkaline E-Kleen cleaning solutions
- Commonly used as a nonflammable, dry film lubricant and corrosion preventive on electrical connectors, pins, screws and other electrical components. Does not inhibit the flow of electricity in electrical connectors
- Excellent release properties make it capable of being used as a mold release agent for flexible or rigid forms
- Can be applied by almost any commercial method – flow coat, immersion, wipe or spray
Working dilutions of E-Tec 522 should be determined by the end user. E-Tec 522 may be diluted with water, which will result in thinner films and reduced durability. E-Tec 522’s water emulsion protective coating can be diluted with tap water. However, if local water is very hard, dilute E-Tec 522 with deionized water.
Properties
- Physical Form
- Appearance
- Tan colored liquid, Clear satin
- Typical Properties
- Characteristics
Test Data for ASTM-D-2247-68
(Humidity Cabinet, 100% - 100°F [38°C])Concentration Cold Roll Steel/Hrs. Iron Phosphate/Hrs. Zinc Phosphate/Hrs.100% 440 400 400 80% 440 400 360 67% 440 360 120 Test Data for ASTM-B-117-73
(Salt Fog-5% Salt, 100% - 100°F [38°C])Concentration Cold Roll Steel/Hrs. Iron Phosphate/Hrs. Zinc Phosphate/Hrs.100% 12 >12 24 80% 8 8 24 67% 6 6 18
Value | Units | Test Method / Conditions | |
pH of Concentrate (100%) | 9.3 - 9.8 | — | CN-TM-069 |
Viscosity (100°F, 38°C) | 16 - 18 | cps | - |
Bulk Density | 8.4 | lbs/gal | - |
Solids | 24.0 | % | COC |
Softening point | 155 (68) | °F/°C | - |
Temperature Stability | 40 - 100 (4 - 38) | °F/°C | - |
Coverage | 2400.0 | ft2/gal | - |
Film Thickness | 0.2 | in. | - |
Flexibility | Pass | — | O-T bend |
5% Salt Fog | Pass | 12 hours | CR Steel |
Exterior Durability | 3 - 6 | mos | Horizontal CR Steel |
Dry Time | 15.0 | min | - |
Technical Details & Test Data
- Technical Details
Additional Information
Drying time depends upon temperature, humidity and air flow. At 75°F (24°C) and 45% relative humidity, E-Tec 522 dries to the touch in about 15 minutes when applied at full strength. Forced warm air and/or dilution will decrease the drying time.
Removal of Finishes
The E-Tec 522 is easily removed in EPI’s alkaline E-Kleen cleaning solutions.
Disposal
Spent E-Tec 522 solutions can be discharged into the sewer after neutralizing to the pH required by local sanitary department.
Safety & Health
- Caution
Protect eyes from solutions with glasses, goggles, or a face shield. In the event of contact, flush eyes thoroughly with water and obtain medical attention.
Packaging & Availability
- Packaging
5 gallon and 55 gallon non-returnable containers.