Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Background
The 3D4MAKERS ABS Filament contains unique properties because the material has an extremely constant diameter and roundness. On top of that the ABS Filament does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS ABS Filament particularly suitable for FDM and FFF 3D printers.
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Physical Form
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Flexural Modulus (3.20mm) | 2300 | MPa | ISO 178 |
| Flexural Strength (3.20mm) | 68 | MPa | ISO 178 |
| Impact Charpy Notched Impact Strength (23ºC) | 20 | kJ/m² | ISO 179 1eA |
| Impact Notched Izod Impact Strength (23ºC) | 19 | kJ/m² | ISO 180/A |
| Tensile Modulus (3.20mm) | 2280 | MPa | ISO 527-2 |
| Tensile Strain (Yield,3.20mm) | 2.5 | % | ISO 527-2/50 |
| Tensile Stress (Yield,3.20mm) | 45 | MPa | ISO 527-2/50 |
| Value | Units | Test Method / Conditions | |
| Apparant Density | 0.65 | g/cm³ | ISO 60 |
| Density | 1.05 | g/cm³ | ISO 1183/B |
| Melt Volume-Flow Rate (MVR, 220ºC/10.0 Kg) | 15 | g/10 min | ISO 1133 |
| Molding Shrinkage-Flow | 0.40 - 0.70 | — | ISO 294-4 |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature (1.8Mpa, Unannealed) | 100 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 97 | °C | ISO 306/B50 |
| Value | Units | Test Method / Conditions | |
| Burning Rate (2.00mm) | 55 | mm/min | ISO 75-2/A |
| Carbon Emission | 25 | μg/g | VDA 277 |
| Flame Rating (1.50mm) | HB | — | UL 94 |
| Fogging | 97 | — | ISO 294-4 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Print Recommendation
Nozzle Temperature 220 - 260 ºC Bed Temperature 90 - 110 ºC Print Speed 30 - 70 mm/s Bed Adhesion PEI sheet, Buildtak, Adhesion spray, ABS juice
Our experience while printing with the 3D4MAKERS ABS Filament is that it gives better results when used at higher temperatures than other ABS Filaments. This can vary with different printers. To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. This cannot be a room where people sleep. When the 3D printer is not being used it is important to keep the 3D4MAKERS ABS Filament in a bag and stored in a cool, dry and dark place.