Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Product Background
The 3D4MAKERS filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Elmendorf Tear (MD) | 15 | g/mil | ASTM D1922 |
| Elmendorf Tear (TD) | 13 | g/mil | ASTM D1922 |
| Elongation at Break (MD) | 160 | % | ASTM D882 |
| Elongation at Break (TD) | 100 | % | ASTM D882 |
| Impact Spencer Impact | 2.5 | J | — |
| Tensile Modulus (MD) | 3309 | MPa | ASTM D882 |
| Tensile Modulus (TD) | 3861 | MPa | ASTM D882 |
| Tensile Strength (MD) | 110.3 | MPa | ASTM D882 |
| Tensile Strength (TD) | 144.7 | MPa | ASTM D882 |
| Value | Units | Test Method / Conditions | |
| Density | 1.24 | g/cm³ | ASTM D1505 |
| Water Vapor | 375 | g-mil/ m2-24hr | ASTM F1249 |
| Value | Units | Test Method / Conditions | |
| Oxygen | 675 | cc-mil/ m2-24hr-atm | D1434 |
| Value | Units | Test Method / Conditions | |
| Carbon Dioxide (M2-24Hr-Atm) | 3 | cc-mil | Internal |
Technical Details & Test Data
- Print Recommendation
Nozzle Temperature 170- 220 ºC Bed Temperature 20 - 60 ºC Print Speed 30 - 80 mm/s Bed Adhesion Glass bed, Blue painters tape, Adhesion spray & more
To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun. This cannot be a room where people sleep. When the 3D printer is not being used it is important to keep the 3D4MAKERS PLA Filament in a bag and stored in a cool, dry and dark place until it is used again.