Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Industrial Additives Functions
- Technologies
Features & Benefits
- Materials Features
- Main Features
- For hot compression molding
- High electrical conductivity
- High thermal conductivity
Applications & Uses
- Applications
- Industrial Additives End Use
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Flame Rating
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Other Properties
| Value | Units | Test Method / Conditions | |
| Bending Strain | 0.1 | % | DIN EN ISO 178 |
| Charpy Impact Strength | 1.3 | kJ/m2 | DIN EN ISO 179-1eU |
| Flexural Strength | 40 | MPa | DIN EN ISO 178 |
| Modulus of Elasticity (Flexural test) | 15100 | MPa | DIN EN ISO 178 |
| Value | Units | Test Method / Conditions | |
| Density | 2 | g/cm3 | - |
| Value | Units | Test Method / Conditions | |
| Service Temperature (long term) | 200 - 240 | °C | - |
| Service Temperature (short term) | 280 | °C | - |
| Specific Heat | 0.9 | J/(g*K) | DIN EN 821 |
| Thermal Conductivity (in-plane) | 85.8 | W/(K*m) | DIN EN 821 |
| Thermal Conductivity (through-plane) | 25.8 | W/(K*m) | DIN EN 821 |
| Thermal Diffusivity (in-plane) | 50.9 | mm2/s | DIN EN 821 |
| Thermal Diffusivity (through-plane) | 15.3 | mm2/s | DIN EN 821 |
| Value | Units | Test Method / Conditions | |
| Specific Electrical Conductivity | 1.42 x 10^4 | S/m | DIN EN ISO 3915 |
| Volume Resistivity | 7.04 x 10^-5 | Ω*m | DIN EN ISO 3915 |
| Value | Units | Test Method / Conditions | |
| Bulk Density | 0.55 | g/cm3 | EN ISO 60 |
| Flammability (UL94) | V0 | - | DIN IEC 60695-11-10 |
| Water Absorption (23°C / 50% relative humidity up to saturation) | max. 0.1 | % | DIN EN ISO 62 |
Regulatory & Compliance
- Certifications & Compliance