LNP™ THERMOTUF™ Compound OF006N

Identification & Functionality

Additives Included

Flame Retardant

Chemical Family

Polyphenylene Sulfide (PPS)

Fillers Included

Glass Fiber

Polymer Name

Polyphenylene Sulfide (PPS)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Features & Benefits

Materials Features

Chemical Resistant,

Dimensional Stability,

Flame Retardant,

High Linearity,

High Modulus,

High Stiffness,

High Temperature Resistance,

Low Warpage,

Nano Molding Technology,

Very Good Heat Resistance

Applications & Uses

Markets

Consumer Goods,

Electrical & Electronics,

Industrial

Applications

Consumer Goods — Appliances & Electronics

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Industrial Automation

Electrical & Electronics — Parts & Components

Connectors,

Switches & Relays

Plastics & Elastomers End Uses

Antenna Splitters,

Electrical Components,

Electrical/Electronic Applications,

Industrial Applications,

Laptop Antenna,

Mobile Phone Antenna,

Wearable Device Antenna

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Flame Rating

UL 94 V0

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	165	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	2.2	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	11300	MPa	ASTM D638
Flexural Strength (at 1.3 mm/min, 50 mm span) ¹¹	230	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	10000	MPa	ASTM D790
Tensile Stress (Break, 5 mm/min) ¹¹	165	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	2.2	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	11500	MPa	ISO 527
Flexural Strength (at 2 mm/min) ¹¹	235	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	10200	MPa	ISO 178

Physical Properties

	Value	Units	Test Method / Conditions
Density ¹¹	1.54	g/cm³	ASTM D792
Melt Flow Rate (at 315°C, 5.0 kgf) ¹¹	48	g/10 min	ASTM D1238
Melt Volume Rate (at 315°C, 5.0 kg) ¹¹	32	cm³/10 min	ISO 1133
Specific Gravity ¹¹	1.54	—	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.01	%	ISO 62-4
Moisture Absorption (at 23°C, 50% RH, Equilibrium) ¹¹	0.01	%	ISO 62-4
Water Absorption (at 23°C, 24hrs) ¹¹	0.02	%	ISO 62-1
Water Absorption (at 23°C, 24hrs) ¹¹	0.01	%	ASTM D570
Water Absorption (at 23°C, saturated) ¹¹	0.03	%	ISO 62-1
Mold Shrinkage (flow) ᵍ ¹¹	0.2 - 0.3	%	SABIC method
Mold Shrinkage (xflow) ᵍ ¹¹	0.5 - 0.6	%	SABIC method

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	268	°C	ASTM D648
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	275	°C	ASTM D648
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	267	°C	ISO 75/Af
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	278	°C	ISO 75/Bf
Coefficient of Thermal Expansion (at -40°C to 90°C, flow) ¹¹	0.000013	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 90°C, flow) ¹¹	0.000013	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 90°C, xflow) ¹¹	0.000051	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 90°C, xflow) ¹¹	0.000051	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000013	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000046	1/°C	ISO 11359-2
Relative Temperature Index (Electrical) ᵖ ¹¹	130	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	130	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	130	°C	UL 746B

Electrical Properties

	Value	Units	Test Method / Conditions
Dielectric Constant (at 1.9 GHz) ¹¹	3.82	—	SABIC method
Dissipation Factor (at 1.9 GHz) ¹¹	0.004	—	SABIC method
Dielectric Constant (at 5 GHz) ¹¹	3.8	—	SABIC method
Dissipation Factor (at 5 GHz) ¹¹	0.0045	—	SABIC method

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	120	J/m	ASTM D256
Izod Impact (Unnotched, at 23°C) ¹¹	710	J/m	ASTM D4812
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	12	kJ/m²	ISO 180/1A
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹	50	kJ/m²	ISO 180/1U
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	12.5	kJ/m²	ISO 179/1eA
Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹	50	kJ/m²	ISO 179/1eU

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	120 - 140	°C	—
Drying Time ⁷	3 - 4	Hrs	—
Hopper Temperature ⁷	50 - 70	°C	—
Melt Temperature ⁷	310 - 330	°C	—
Front - Zone 3 Temperature ⁷	310 - 330	°C	—
Middle - Zone 2 Temperature ⁷	300 - 320	°C	—
Rear - Zone 1 Temperature ⁷	290 - 300	°C	—
Mold Temperature ⁷	135 - 160	°C	—
Back Pressure ⁷	0.3 - 0.7	MPa	—
Screw Speed ⁷	50 - 100	rpm	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94V-0 Flame Class Rating) ᵖ	0.8	mm	UL 94

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America