LNP™ KONDUIT™ Compound OX11315

Identification & Functionality

Additives Included

Flame Retardant,

Mold Release Agent

Chemical Family

Polyphenylene Sulfide (PPS)

Fillers Included

Graphite,

Mineral

Polymer Name

Polyphenylene Sulfide (PPS)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Features & Benefits

Labeling Claims

Bromine-free,

Chlorine-free,

No Added PFAS

Materials Features

Electrically Insulating,

Electrically Isolative,

Flame Retardant,

Good Mold Release,

No Added PFAS,

Non-brominated,

Non-chlorinated,

Thermally Conductive,

Unreinforced

Applications & Uses

Markets

Automotive & Transportation,

Building & Construction,

Consumer Goods,

Electrical & Electronics

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Automotive Lighting

Building & Construction — Building Envelope & Roofing

Glazing & Window Elements

Building & Construction — Building Materials

Interior Fixtures

Electrical & Electronics — Devices & Assemblies

Automotive Electronics,

Consumer Electronics,

Displays,

Industrial Automation,

Lighting

Plastics & Elastomers End Uses

Appliances,

Automotive Electronics,

Building Materials,

Cell Phones,

Computer Components,

Construction Applications,

Displays,

Electrical/Electronic Applications,

Home Appliances,

Lighting Applications,

Tablets

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Flame Rating

UL 94 5VA,

UL 94 V0

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	41	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	0.2	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	30100	MPa	ASTM D638
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	82	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	26500	MPa	ASTM D790
Tensile Stress (Break, 5 mm/min) ¹¹	54	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	0.3	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	18380	MPa	ISO 527
Flexural Stress ¹¹	84	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	21380	MPa	ISO 178

Physical Properties

	Value	Units	Test Method / Conditions
Specific Gravity ¹¹	1.78	—	ASTM D792
Density ¹¹	1.76	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.01	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.34	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.44	%	ASTM D955
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.01	%	ISO 62

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	275	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	242	°C	ASTM D648
Specific Heat ¹¹	1.26	J/g-°C	ASTM C351
Thermal Conductivity (through-plane, 10*10*3mm sample) ¹¹	3.5	W/m-K	ASTM E1461-07
Thermal Conductivity (in-plane, 25*0.4mm disc) ¹¹	15	W/m-K	ASTM E1461-07
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	275	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	238	°C	ISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹	130	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	130	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	130	°C	UL 746B

Electrical Properties

	Value	Units	Test Method / Conditions
Comparative Tracking Index ʳ ¹¹	400	V	IEC 60112
Surface Resistivity ¹¹	2.40E+15	Ω	ASTM D257
Dielectric Strength (at 1.6mm) ¹¹	1.2	kV/mm	IEC 60243-1

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹	54	J/m	ASTM D4812
Izod Impact (Notched, at 23°C) ¹¹	16	J/m	ASTM D256
Multi-Axial Impact ¹¹	1	J	ISO 6603
Instrumented Dart Impact Total Energy (at 23°C) ¹¹	5	J	ASTM D3763
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹	3	kJ/m²	ISO 180/1U
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	1	kJ/m²	ISO 180/1A

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	120 - 150	°C	—
Drying Time ⁷	4	Hrs	—
Melt Temperature ⁷	320 - 350	°C	—
Front - Zone 3 Temperature ⁷	315 - 345	°C	—
Middle - Zone 2 Temperature ⁷	315 - 345	°C	—
Rear - Zone 1 Temperature ⁷	315 - 345	°C	—
Mold Temperature ⁷	110 - 150	°C	—
Back Pressure ⁷	0.3 - 0.7	MPa	—
Screw Speed ⁷	60 - 100	rpm	—
Shot to Cylinder Size ⁷	50 - 75	%	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94-5VA Flame Class Rating) ᵖ	min. 2.5	mm	UL 94
UL Recognized (94V-0 Flame Class Rating) ᵖ	min. 1	mm	UL 94
UV-light (Water exposure/immersion) ᵖ	F1	—	UL 746C

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Regional Availability

• Americas
• Asia
• Europe
• North America