Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Cure Method
Properties
- Typical Cured Properties
- Note
¹ Tested on G-10 glass epoxy substrates cured under recommended conditions.
Value | Units | Test Method / Conditions | |
Viscosity | 4800 | cps | — |
Density | 1.37 | g/ml | — |
Minimum Irradiation Time | 10 | seconds | — |
Recommended Irradiation Time | 30 | seconds | — |
Maximum Curing Thickness | 1 | mm | — |
Tensile Lap Shear Strength ¹ | 2500 | psi | — |
Elongation | 3 | % | — |
Hardness | 78 | Shore D | — |
Glass Transition Temperature (Tg) | 72 | °C | — |
Operating Temperature | -55 to 150 | °C | — |
Coefficient of Thermal Expansion (α1) | 45 | ppm/°C | — |
Coefficient of Thermal Expansion (α2) | 150 | ppm/°C | — |
Volume Resistivity | min. 1x10¹⁴ | ohm-cm | — |
Water Absorption (24 hours Submersion at 25°C) | 0.1 | % | — |
Regulatory & Compliance
- Certifications & Compliance