Products

EB-316TC-2 is a two component, thermally conductive, electrically insulating epoxy designed for heat sinking electronics and semiconductors. It may be used as an adhesive, potting, or encapsulation material, for industries such as consumer, medical or optics.

EB-126HT is two components, clear epoxy system. This long work life, low viscosity resin system is designed for the bonding, coating, sealing, and impregnation of electrical and structural components. The cured system has excellent electrical and physical properties above 250°C with outstanding high temperature stability. It also provides excellent moisture, chemical, and corrosion resistance as well as resistance to thermal and mechanical shock.

FLASHBOND™ UV-6502CL is a low viscosity, high clarity, light curing epoxy adhesive that offers excellent strength wetting properties. UV-6502CL cures to a clear polymer and maintains clarity at elevated temperatures. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cures best in the UVA wavelengths (315-365nm).

EB-316TM is a thixotropic version of EB-316M, a high strength, semi-rigid epoxy adhesive. This tough adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high-performance medical grade epoxy adhesive passes 500 thermal cycles from - 50°C to 150°C. EB-316M is excellent for cryogenic temperature applications.

EB-142HT-1 is unfilled, low viscosity, high temperature resistant epoxy adhesive. It maintains high lap shear strength up to 210°C and has excellent thermal and chemical resistance. It can be used for bonding, coating, and sealing applications where a thin film with high insulating resistance is required, particularly at elevated temperatures. It is recommended for bonding metals, glass, and ceramic substrates.

EB-316M is a semi-rigid, high strength structural epoxy adhesive. This tough adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high-performance medical grade epoxy adhesive passes 500 thermal cycles from -50°C to 150°C. EB-316M is excellent for cryogenic temperature applications.

FLASHBOND™ UV-3700F is a filled, low shrinkage, light curing epoxy adhesive that offers low CTE and high bonds strength. UV-3700F cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass. This filled system is excellent for when low viscosity systems are not ideal. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (400- 415nm).

FLASHBOND™ UV-8701E is a semi-thixotropic, light curing epoxy adhesive that bonds well to a wide variety of substrates including engineered plastics such as Ultem™, Lexan™, and ABS. This product exhibits good surface wetting and adhesion to glass and many plastics. UV-8701 is clear magenta when uncured but turns translucent when cured as a built in cure indicator. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (400-415nm). Can be cured at 150°C for shadowed areas if necessary.

FLASHBOND™ UV-5402 is a low viscosity, flexible, light curing epoxy adhesive that offers excellent strenth and flexibility for reduced cracking. UV-5402 is low viscosity and high elongation. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (400-415nm) and can also cure down to 365nm.

EPOXIBOND™ EB-119M is a two component, low viscosity, heat cure epoxy designed for high temperature applications. It is especially well suited to fiber optic terminating, where optical fibers are "pot and polished" into connectors or ferrules.

SetWORX™ U-47MP is a two component, urethane adhesive & encapsulating material which cures to a resilient polyurethane polymer. It finds use as an adhesive, potting and encapsulating material. U-47MP provides a sag resistent bead when dispensed and delivers excellent adhesion to many materials including metals, glass and engineering plastics.

EPOXIBOND™ EB-119SP is unfilled, low viscosity, heat curing, high temperature resistant epoxy adhesive. It maintains high lap shear strength up to 210°C and has excellent thermal and chemical resistance. It can be used for bonding, coating, and sealing applications where a thin film with high insulating resistance is required, particularly at elevated temperatures. It is recommended for bonding metals, glass, and ceramic substrates. It has long pot-life and has an amber color change upon cure.

SetWORX™ 1510 is a fast setting, toughened epoxy adhesive designed for industrial grade applications. This epoxy system has 1:1 mixing ratio by volume & cure fast at room temperature. When cured it is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator. The cured adhesive exhibits high impact resistance and exceptional bond strength. It can be used for bonding glass, metals, woods and some plastics.

SETWORX™ 60 is a toughened, high strength, structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties.

FLASHBOND™ UV-8504E is a low viscosity, fast curing, light-curing epoxy adhesive that offers excellent strength wetting properties. UV-8504E cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass.This product requires direct light exposure during cure. UV-8504E can cure fully in 30 seconds using optimal cure conditions. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cures best in the UVA wavelengths (315-365nm). FLASHBOND™ UV-8504E has been tested to and passes ISO-10993-5 standards for cytotoxicity.

FLASHBOND™ UV-8300LV is a low viscosity, light curing epoxy adhesive that bonds well to a wide variety of substrates including metals, glass, ceramics and some plastics. This product exhibits good surface wetting and adhesion to glass and many plastics. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (405nm) as well as down to 365nm. Flashbond UV-8300LV has been tested to and passes ISO-10993-5 for cytotoxicity.

EPOXIBOND™ EB-153 is unfilled, low viscosity, heat curing, high temperature resistant epoxy adhesive. It maintains high lap shear strength up to 210°C and has excellent thermal and chemical resistance. It can be used for bonding, coating, and sealing applications where a thin film with high insulating resistance is required, particularly at elevated temperatures. It is recommended for bonding metals, glass, and ceramic substrates. It has long pot-life and has an amber color change upon cure.

FLASHBOND™ UV-5608DC is an innovative light cure epoxy adhesive. It has unique features that allow for fast processing and fixturing of parts. Once the adhesive has been activated with UV light, it has set open time that allows for assembly of parts. The product continues to cure at room temperature or rapidly cures when exposed to low temperature heat. The cured product exhibits low shrinkage and excellent thermal, water and chemical resistance. Typical applications include bonding of optics, connectors, fibers, lenses, prisms and other electronic components where low shrinkage and low outgassing are required.

SetWORX 90 is a toughened, high strength, structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties. It is recommended for bonding engineering thermoplastics, SMC (sheet molding compounds) in aerospace and automotive applications. SetWORX 90 is BPA-Free and non-hazardous for shipping.

EPOXIBOND™ EB-107LP-1 is a two component, room temperature curing epoxy featuring very low viscosity, and excellent optical-mechanical properties.

EPOXIBOND™ EB-135 is a clear epoxy adhesive designed for electronic, optical, medical, and general applications and for casting of small electrical components. This epoxy system has 2 to 1 mixing ratio by volume & cure fast at moderate temperature. The cured adhesive gives high impact and bond strength. It can be used for bonding glass, metals, woods and some plastics

SetWORX™ 05 is a fast cure, high strength, structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties. The high performance epoxy provides excellent bond strengths to a wide variety of plastics and metals.

FLASHBOND™ UV-3607HTis a 1-component, UV/Thermal cure adhesive & sealant. This material can cure under moderate intensity UV light as well as elevated temperatures for shadowed areas. Its low viscosity is ideal for coating, capillary action, and doming applications. Unlike traditional dual cure epoxy systems which need light + heat, UV-3607HT can cure either with UV/LED light or with heat.

EPOXIBOND™ EB-135LP is a clear epoxy adhesive designed for electronic, optical, medical, and general applications and for casting of small electrical components. This epoxy system has 2 to 1 mixing ratio by volume & cure fast at moderate temperature. The cured adhesive gives high impact and bond strength. It can be used for bonding glass, metals, woods and some plastics.

EPOXIBOND™ EB-116 is high strength, structural epoxy adhesive. This tough adhesive has an excellent combination of shear and peel strength. It has also excellent impact and vibration resistance and low temperature flexibility. This high-performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties and is excellent for cryogenic applications. It is recommended for bonding glass, metal, ceramics, and engineering thermoplastics. Due to its low viscosity, it can be also used for potting and encapsulating electrical/electronic coponents

SetWORX™ 411HP is a toughened, high strength, industrial grade structural epoxy adhesive. This adhesive has an excellent combination of shear and peel strength. 411HP is a one component, heat cure, conductive epoxy adhesive. It has also excellent impact and vibration resistance and low temperature flexibility. This high-performance epoxy adhesive exhibits very good physical, thermal, and electrical insulation properties. It is recommended for bonding engineering thermoplastics, SMC (sheet molding compounds) in aerospace and automotive applications.

EB-155 is an undiluted, unfilled, low viscosity clear epoxy system that exhibits exceptional resistance to impact and thermal shock. This system has low exotherm and long work life. Applications includes, high bond strength adhesive for most similar and dissimilar substrates; LED displays, any fiber optic application. It can also be used for making in-place laminates or for protective coating on metals etc. Also it can be used for semi-rigid, moisture proof, gas tight seals between plastic and metallic or other substrates. This is also recommended for potting devices such as connector shells from which rigid or flexible wires may protrude directly through the epoxy.

EPOXIBOND™ EB-107LP-2 is a two component - optical, medical, and semiconductor grade epoxy resin, with low viscosity, long pot-life, and good handling characteristics.