Products

DWBLEND PC / ABS V0 is a PC/ABS alloy with good fluidity and mechanical strength, self-extinguishing in class V0 over 1.6mm (method UL 94)

DWBLEND PC / ABS T45 is a PC alloy/ ABS medium heat resistance and good fluidity, for injection molding of a special esthetic.

DWPLENE PP OMO FV10% AGR is a polypropylene homopolymer reinforced with 10% glass fiber, chemically crimped by injection molding.

DWCARB PC V0 is a polycarbonate as it is for injection molding, self-extinguishing in class V0 on 1,6mm (method UL 94).

DWCARB PC150 is a polycarbonate for general use with medium-low fluidity and high mechanical strength, are available on request in UV stabilized versions or with release agent.

DWMID PA 6 28S Polyamide a natural or colored according to sample of different viscosities. It is reinforced with fiber or glass microspheres, self-lubricating, mineral fillers.

DWTER PBT FV30% is a standard polybutylene terephthalate reinforced with 30% glass fiber, for injection molding.

DWMID PA 6 FV30% Polyamide reinforced with 30% fiberglass, with good fluidity, for injection molding of parts with improved stiffness and mechanical resistance.

ERREPIEMME PA 6 S9000 R is a Polyamide esthetic, normal viscosity, good fluidity for injection casting parts require mechanical resistance.

DWPLENE PP OMO TC40% is a polypropylene homopolymer reinforced with 40% talc, for injection molding.

DWTER PBT N100 V0 is a Polybutylene terephthalate. It is available in natural with or without fillers and self-extinguishing non-dripping.