Products

Errepiemme PPS R40 R is reinforced with 40% glass fiber, an excellent fluidity allows fast cycles for products where rigidity, high chemical and mechanical resistance are required temperatures.

DWMID PA 6 FV30% Polyamide reinforced with 30% fiberglass, with good fluidity, for injection molding of parts with improved stiffness and mechanical resistance.

DWTER PBT FV30% is a standard polybutylene terephthalate reinforced with 30% glass fiber, for injection molding.

ERREPIEMME PA 6 S9000 R is a Polyamide esthetic, normal viscosity, good fluidity for injection casting parts require mechanical resistance.

DWKRAL ABS FV17% for injection molding reinforced with 17% fiberglass, suitable for products where high demand is required rigidity and mechanical strength.

DWBLEND PC / ABS V0 is a PC/ABS alloy with good fluidity and mechanical strength, self-extinguishing in class V0 over 1.6mm (method UL 94)

DWMID PA 6 28S Polyamide a natural or colored according to sample of different viscosities. It is reinforced with fiber or glass microspheres, self-lubricating, mineral fillers.

DWBLEND PC / ABS T45 is a PC alloy/ ABS medium heat resistance and good fluidity, for injection molding of a special esthetic.

Errepiemme ABS R Type A is used as high flow ABS for injection molding.

DWKRAL ABS V0 has a high fluidity ABS for injection molding, self-extinguishing in class V0 on 1.6 mm (UL 94 method).

DWTER PBT N100 V0 is a Polybutylene terephthalate. It is available in natural with or without fillers and self-extinguishing non-dripping.