Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Flame Rating
- Mechanical Properties
- Physical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Test Specimen Production
- Rheological Properties
- Burn Testing Properties
Value | Units | Test Method / Conditions | |
Tensile Modulus (dry) | 247000 | psi | ISO 527 |
Tensile Modulus (cond.) | 209000 | psi | ISO 527 |
Tensile Strength (dry) | 6820 | psi | ISO 527 |
Tensile Strength (cond.) | 6090 | psi | ISO 527 |
Yield Stress (dry) | 6820 | psi | ISO 527 |
Yield Stress (cond.) | 6090 | psi | ISO 527 |
Yield Strain (dry) | 5 | % | ISO 527 |
Yield Strain (cond.) | 13 | % | ISO 527 |
Stress at 50% Strain (dry) | 5220 | psi | ISO 527 |
Stress at 50% Strain (cond.) | 4930 | psi | ISO 527 |
Stress at Break (dry) | 6820 | psi | ISO 527 |
Stress at Break (cond.) | 5080 | psi | ISO 527 |
Nominal Strain at Break (ɛtb, dry) | 200 | % | ISO 527 |
Nominal Strain at Break (ɛtb, cond.) | min. 50 | % | ISO 527 |
Charpy Notched Impact Strength (+23°C, dry) | 3.33 | ftlb/in² | ISO 179/1eA |
Charpy Notched Impact Strength (+23°C, cond.) | 4.28 | ftlb/in² | ISO 179/1eA |
Charpy Notched Impact Strength (-30°C, dry) | 2.85 | ftlb/in² | ISO 179/1eA |
Charpy Notched Impact Strength (-30°C, cond.) | 2.85 | ftlb/in² | ISO 179/1eA |
Flexural Modulus (23°C, dry) | 255000 | psi | ISO 178 |
Flexural Modulus (23°C, cond.) | 203000 | psi | ISO 178 |
Flexural Stress at Conv. Deflection (23°C, dry) | 8410 | psi | ISO 178 |
Flexural Stress at Conv. Deflection (23°C, cond.) | 6090 | psi | ISO 178 |
Flexural Strength (23°C, dry) | 9570 | psi | ISO 178 |
Flexural Strength (23°C, cond.) | 7690 | psi | ISO 178 |
Flexural Strain at Flexural Strength (23°C, dry) | 6 | % | ISO 178 |
Flexural Strain at Flexural Strength (23°C, cond.) | 6 | % | ISO 178 |
Value | Units | Test Method / Conditions | |
Density (dry) | 1 | g/cm³ | ISO 1183 |
Density (cond.) | 5 | g/cm³ | ISO 1183 |
Water Absorption (dry) | 1.5 | % | Sim. to ISO 62 |
Humidity Absorption (dry) | 0 | % | Sim. to ISO 62 |
Humidity Absorption (cond.) | 6 | % | Sim. to ISO 62 |
Density | 1.05 | g/cm³ | ASTM D 792 |
Value | Units | Test Method / Conditions | |
Melt Temperatures | 210 - 230 | °C | — |
Value | Units | Test Method / Conditions | |
Melting Temperature (dry) | 352 | °F | ISO 11357-1/-3 |
Temperature of Deflection Under Load A (1.80 Mpa, dry) | 122 | °F | ISO 75-1/-2 |
Temperature of Deflection Under Load B (0.45 Mpa, dry) | 266 | °F | ISO 75-1/-2 |
Vicat Softening Temperature A (10 N, 50 K/h, dry) | 347 | °F | ISO 306 |
Vicat Softening Temperature B (50 N, 50 K/h, dry) | 302 | °F | ISO 306 |
Melting Temperature | 352 | °F | ASTM D 3418 |
Value | Units | Test Method / Conditions | |
Volume Resistivity (pV, dry) | 1000000000000 | Ohm*m | IEC 62631-3-1 |
Volume Resistivity (pV, cond.) | 2000000000000 | Ohm*m | IEC 62631-3-1 |
Surface Resistivity (σC, Circular Electrodes, cond.) | min. 1E15 | Ohm/sq | IEC 62631-3-2 |
Relative Permittivity (50Hz, cond.) | 5 | — | IEC 62631-2-1 |
Relative Permittivity (100Hz, cond.) | 4.8 | — | IEC 62631-2-1 |
Relative Permittivity (1MHz, dry) | 3 | — | IEC 62631-2-1 |
Relative Permittivity (1MHz, cond.) | 63. 2 | — | IEC 62631-2-1 |
Dissipation Factor (50Hz, cond.) | 990 | E-4 | IEC 62631-2-1 |
Dissipation Factor (100Hz, cond.) | 800 | E-4 | IEC 62631-2-1 |
Dissipation Factor (1Mhz, dry) | 380 | E-4 | IEC 62631-2-1 |
Dissipation Factor (1Mhz, cond.) | 400 | E-4 | IEC 62631-2-1 |
Electric Strength (AC, S20/S20, t. 1 mm, dry.) | 864 | kV/in | IEC 60243-1 |
Electric Strength (AC, S20/S20, t. 1 mm, cond.) | 914 | kV/in | IEC 60243-1 |
Electric Strength (AC, S20/P50, dry) | 711 | V/mil | Sim. to IEC 60243-1 |
Comparative Tracking Index (Test Solution A, 50 Drops Value, dry) | 600 | — | IEC 60112 |
Value | Units | Test Method / Conditions | |
Injection Molding - Melt Temperature | 464 | °F | ISO 294 |
Injection Molding - Mold Temperature | 176 | °F | ISO 294 |
Injection Molding - Injection Velocity | 7.87 | in/s | ISO 294 |
Injection Molding - Pressure at Hold | 10200 | psi | ISO 294 |
Value | Units | Test Method / Conditions | |
Melt Volume Flow Rate (dry, at 440°F, 4.76lb) | 4.1 | cm³/10min | ISO 1133 |
Molding Shrinkage (Parallel, dry) | 0.6 | % | ISO 294-4, 2577 |
Molding Shrinkage (Normal, dry) | 0.9 | % | ISO 294-4, 2577 |
Mold Temperature (dry) | 176 | °F | — |
Melt Temperature (dry) | 464 | °F | — |
Minimum Mold Temperature | 86 | °F | — |
Maximum Mold Temperature | 212 | °F | — |
Minimum Melt Temperature | 428 | °F | — |
Maximum Melt Temperature | 500 | °F | — |
Value | Units | Test Method / Conditions | |
Burning Behavior (at 1.5 mm Nominal Thickness) (dry) | V-2 | class | IEC 60695-11-10 |
Burning Behavior (at Thickness 0.1260 in.) (dry) | V-2 | class | IEC 60695-11-10 |
Oxygen Index (dry) | 26 | % | ISO 4589-1/-2 |
Limiting Oxygen Index (at Thickness 0.0591 in.) | 26 | % | ASTM D 2863 |
Flame Time | 8 | sec | FAR 25.853 |
Flaming Time of Drippings | 2 | sec | FAR 25.853 |
Burn Length | 0.3937 | in | FAR 25.853 |
Regulatory & Compliance
- Quality Standards