VESTAMID

Evonik Brand

Supplier:Evonik

Products:39

Polymer Name:Polyamide 612 (PA 612)
Processing Methods:Injection Molding, Profile Extrusion, Extrusion
Flexural Modulus:1977.43 - 1977.43 MPa
Materials Features:Translucent, Dimensional Stability, Low Water Absorption, Unreinforced, Food Contact Acceptable, Chemical Resistant, Medium Viscosity

VESTAMID® D16 is a medium-viscosity Polyamide 612 compound for extrusion and injection molding applications such as monofilaments (e.g., toothbrush bristles). The material based on PA612 absorbs only small amounts of water, resulting in excellent dimensional stability of components under changing ambient humidity.

VESTAMID® D18

Polymer Name:Polyamide 612 (PA 612)
Processing Methods:Injection Molding, Profile Extrusion, Extrusion
Flexural Modulus:2087.67 - 2087.67 MPa
Materials Features:Translucent, Dimensional Stability, Low Water Absorption, Unreinforced, Food Contact Acceptable, Medium Viscosity

VESTAMID® D18 is a medium-viscosity polyamide 612 compound that is specifically designed for extrusion and injection molding processes. It is commonly used for applications such as monofilaments, including toothbrush bristles. The material exhibits low water absorption, which contributes to the exceptional dimensional stability of components even when exposed to varying ambient humidity conditions. VESTAMID® D18 is suitable for profile extrusion processing techniques.

VESTAMID® DX9303 BK E70288

Polymer Name:Polyamide 612 (PA 612)
Processing Methods:Injection Molding, Pipe Extrusion, Tubing Extrusion, Extrusion
Additives Included:Plasticizer (Unspecified), Impact Modifier, Light Stabilizer, Heat Stabilizer
Flexural Modulus:847.47 - 847.47 MPa
Materials Features:Good Thermal Stability, Oil Resistant, Impact Modified, Electrically Insulating, Fuel Resistant, Dimensional Stability, Light Stabilized, Good Light Stability, Unreinforced, Heat Stabilized, Good Weather Stability, Very Good Heat Resistance, Heat Resistance, Good Impact Strength, UV Resistant, Low Moisture Absorption, Impact Resistance, High Viscosity, Plasticized
Color:Black

VESTAMID® DX9303 BK E70288 is a PA 612 extrusion compound developed for tubing systems with higher heat resistance requirements. Its melting point is approximately 35°C higher than that of PA 11 and PA 12 compounds, allowing for higher peak temperatures during use. This compound meets the increased demands resulting from higher temperatures in the engine compartment.

VESTAMID® DX9304 BK E70238

Polymer Name:Polyamide 612 (PA 612)
Processing Methods:Injection Molding, Profile Extrusion, Extrusion
Additives Included:Impact Modifier, Heat Stabilizer, Light Stabilizer
Flexural Modulus:1818.96 - 1818.96 MPa
Materials Features:Good Thermal Stability, Oil Resistant, Impact Modified, Electrically Insulating, Heat Stabilized, Fuel Resistant, Dimensional Stability, Light Stabilized, Good Weather Stability, Very Good Heat Resistance, Good Light Stability, Heat Resistance, Good Impact Strength, UV Resistant, Low Moisture Absorption, Impact Resistance, Chemical Resistant, High Viscosity, Unreinforced
Color:Black

VESTAMID® DX9304 BK E70238 is an extrusion compound specifically developed for the manufacturing of tubing systems that require higher heat resistance. With a melting point approximately 35 °C higher than PA 11 and PA 12 compounds, VESTAMID® DX9304 BK E70238 allows for elevated temperatures during use. This compound is particularly well-suited for extruding tubing systems that are exposed to high burst pressures and high service temperatures, such as hydraulic clutch lines. Thanks to its low moisture absorption, the dimensions and properties of parts remain largely unaffected by ambient conditions. Choose VESTAMID® DX9304 BK E70238 for its exceptional heat resistance, reliability, and ability to meet the demanding requirements of tubing systems.

VESTAMID® DX9330

Polymer Name:Polyamide 612 (PA 612)
Processing Methods:Injection Molding, Filament Extrusion, Extrusion
Flexural Modulus:2060.11 - 2060.11 MPa
Materials Features:Food Contact Acceptable, Moderate Water Absorption, Medium Viscosity, Pigmentable, Dimensional Stability, Easier Processing, Unreinforced
Color:Natural

VESTAMID® DX9330 NC is a PA 612 base polymer that does not contain any stabilizers or additives. This versatile material is suitable for both extrusion and injection molding applications. VESTAMID® DX9330 NC is primarily used in special cases where additives are not preferred or processing aids are unnecessary, such as filament extrusion. With its optimal balance of amino and carboxyl end groups, this material offers ease of processing and dyeability. PA 612 is known for its moderate water absorption, good dimensional stability, and consistent properties in varying ambient humidity conditions. VESTAMID® DX9330 NC is supplied as cylindrical granules in moisture-proof bags, ready for seamless processing. Maintain a processing temperature range of 250°C to 290°C for optimal results. Choose VESTAMID® DX9330 NC for its reliability, versatility, and ease of processing in your specialized applications.

VESTAMID® eCO LX9039 BBM100

Polymer Name:Polyamide 12 (PA 12)
Flexural Modulus:1412.45 - 1412.45 MPa
Materials Features:Medium Viscosity, Unreinforced
Color:Natural

VESTAMID® eCO LX9039 BBM100 is a unique polyamide 12 product offered by Evonik. It is an unmodified polyamide 12 with medium viscosity and does not contain any stabilizers or processing aids. This specific formulation is typically utilized in special circumstances where the absence of additives is desired or the presence of processing aids could cause interference. The "eCO" in its name reflects Evonik's commitment to reducing CO2 emissions by utilizing renewable or circular feedstocks through a mass-balance approach. VESTAMID® eCO LX9039 BBM100 provides a reliable solution for applications requiring a pure polyamide 12 material without any additional additives, catering to specific requirements in various industries.

VESTAMID® L1670

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding, Profile Extrusion, Wire Extrusion, Cable Extrusion, Extrusion
Additives Included:Heat Stabilizer, Lubricant (Unspecified), Processing Aid, UV Stabilizer, Light Stabilizer
Flexural Modulus:1350.44 - 1350.44 MPa
Materials Features:Good Tenacity, Low Coefficient of Friction, Lubricated, Low Water Absorption, Heat Stabilized, Dimensional Stability, Light Stabilized, Very Good Heat Resistance, UV Stabilized, Chemical Resistant, Termites Resistant, Semi Crystalline, Low Viscosity, Unreinforced, Rodents Resistant
Color:Natural

VESTAMID® L1670 is a low-viscosity polyamide 12 compound that has been specifically developed with heat and light stabilization for the extrusion of thin wire insulations and cable jacketings. Coatings made from VESTAMID® L1670 demonstrate a low coefficient of friction, which greatly facilitates the process of laying cables. This compound is well-suited for profile extrusion and wire and cable extrusion processing techniques.

VESTAMID® L1723 BK 9.7624

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding
Additives Included:Light Stabilizer, Plasticizer (Unspecified), Release agent, Heat Stabilizer, Lubricant (Unspecified), UV Stabilizer
Materials Features:Good Tenacity, Heat Stabilized, UV Stabilized, Good Weather Stability, Dimensional Stability, Light Stabilized, Chemical Resistant, Plasticized, Low Coefficient of Friction, Semi Crystalline, Low Water Absorption, Low Viscosity, Lubricated

VESTAMID® L1723 BK 9.7624 is a low-viscosity, plasticized PA12 resin suitable for injection molding. It has been developed specifically for the production of strip clips and cable ties. The parts made from this resin maintain their dimensions in environments with varying humidity levels while possessing high tenacity, a low coefficient of friction, and good chemical resistance.

VESTAMID® L1833 BK 9.7623

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding
Fillers Included:Glass Fiber
Additives Included:Heat Stabilizer
Flexural Modulus:4995.25 - 4995.25 MPa
Materials Features:Good Thermal Stability, Oil Resistant, Electrically Insulating, Heat Stabilized, Fuel Resistant, Good Weather Stability, Shorter Cycle Time, Good Light Stability, UV Resistant, Medium Viscosity, Excellent Mold Release
Color:Black

VESTAMID® L1833 BK 9.7623 is a 23% glass fiber-reinforced, easily demoldable, and heat-stabilized polyamide 12 compound. This compound is specifically formulated to provide efficient production of injection molded parts with short cycle times, thanks to its excellent mold release properties. VESTAMID® L1833 BK 9.7623 is supplied as cylindrical granules, conveniently packaged in moisture-proof bags, ensuring optimal storage conditions. Experience the reliability and performance of VESTAMID® L1833 BK 9.7623 in your injection molding applications. This compound, with its glass fiber reinforcement, offers enhanced strength and rigidity, while its demolding characteristics and heat stability contribute to efficient production. Choose VESTAMID® L1833 BK 9.7623 for its exceptional properties, ease of processing, and suitability for a wide range of injection molded parts.

VESTAMID® L1930 BK 9.7503

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding
Fillers Included:Milled Glass Fiber, Glass Fiber
Additives Included:Heat Stabilizer
Flexural Modulus:3596.58 - 3596.58 MPa
Materials Features:Good Thermal Stability, Oil Resistant, High Strength, Electrically Insulating, Low Water Absorption, Heat Stabilized, Fuel Resistant, Dimensional Stability, Good Weather Stability, Very Good Heat Resistance, Good Light Stability, Excellent Rigidity, Low Mold Shrinkage, Low Warpage, UV Resistant, Low Shrinkage, Good Mechanical Properties, Chemical Resistant, Semi Crystalline, Grease Resistant
Color:Black

VESTAMID® L1930 BK 9.7503 is a heat-stabilized PA 12 compound reinforced with 30% milled glass fibers. It is suitable for injection molding applications. The reinforcement provides high strength and rigidity to the moldings. Due to the low water absorption of PA 12, parts made from this compound exhibit good dimensional stability and maintain mechanical properties even with changing ambient humidity.

VESTAMID® L2123 BK 9.7507

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding, Pipe Extrusion, Tubing Extrusion, Extrusion
Additives Included:Plasticizer (Unspecified), Impact Modifier, Lubricant (Unspecified), Light Stabilizer, Processing Aid, UV Stabilizer
Materials Features:Good Thermal Stability, Low Coefficient of Friction, Low Temperature Impact Resistance, Oil Resistant, Impact Modified, Electrically Insulating, Lubricated, Fuel Resistant, Dimensional Stability, Light Stabilized, Good Light Stability, UV Stabilized, Chemical Resistant, Semi Crystalline, Flexible, Unreinforced, Good Weather Stability, Very Good Heat Resistance, Good Impact Strength, UV Resistant, Low Moisture Absorption, Impact Resistance, High Viscosity, Plasticized, High Melt Viscosity
Color:Black

VESTAMID® L2123 BK 9.7507 is a plasticized and high-viscosity polyamide 12 compound designed for the extrusion of flexible tubing and hoses, particularly in the automotive industry. This compound complies with DIN 73 378, Type: PA 12-PHL, for tubing. Thanks to its low moisture absorption, compounds based on PA 12 demonstrate minimal variation in properties with changing humidity. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. VESTAMID® L2123 BK 9.7507 features a high melt viscosity, optimized cold temperature impact resistance, and precise dimensional control during pipe extrusion. Supplied as cylindrical granules in moisture-proof bags, they are ready for seamless processing. Choose VESTAMID® L2123 BK 9.7507 for its reliability, high-viscosity performance, and excellent properties in your flexible tubing and hose extrusion applications.

VESTAMID® L2124

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding, Pipe Extrusion, Tubing Extrusion, Profile Extrusion, Extrusion
Additives Included:Plasticizer (Unspecified), Lubricant (Unspecified), Light Stabilizer, Heat Stabilizer, Processing Aid, UV Stabilizer
Flexural Modulus:399.62 - 399.62 MPa
Materials Features:Good Thermal Stability, Low Coefficient of Friction, Oil Resistant, Electrically Insulating, Lubricated, Fuel Resistant, Dimensional Stability, Light Stabilized, UV Stabilized, Chemical Resistant, Semi Crystalline, Flexible, Unreinforced, Heat Stabilized, Very Good Heat Resistance, Good Impact Strength, Low Moisture Absorption, High Viscosity, Plasticized, High Melt Viscosity
Color:Natural

VESTAMID® L2124 NC is a plasticized, heat- and light-stabilized polyamide 12 compound specially designed for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. This compound conforms to DIN 73 378, Type: PA 12-PHL, for tubing. VESTAMID® L2124 NC is characterized by its high melt viscosity and excellent dimensional control during pipe extrusion. Compounds based on PA12 demonstrate minimal variation in properties with changing humidity due to their low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Choose VESTAMID® L2124 NC for its reliable performance, versatility, and exceptional properties, ensuring the durability and reliability of your flexible tubing and hose applications.

VESTAMID® L2124 BK 9.7507

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding, Pipe Extrusion, Tubing Extrusion, Profile Extrusion, Extrusion
Additives Included:Plasticizer (Unspecified), Lubricant (Unspecified), Light Stabilizer, Heat Stabilizer, Processing Aid, UV Stabilizer
Flexural Modulus:399.62 - 399.62 MPa
Materials Features:Good Thermal Stability, Low Coefficient of Friction, Oil Resistant, Electrically Insulating, Lubricated, Fuel Resistant, Dimensional Stability, Light Stabilized, Good Light Stability, UV Stabilized, Chemical Resistant, Semi Crystalline, Flexible, Unreinforced, Heat Stabilized, Good Weather Stability, Very Good Heat Resistance, Good Impact Strength, UV Resistant, Low Moisture Absorption, High Viscosity, Plasticized, High Melt Viscosity
Color:Black

VESTAMID® L2124 BK 9.7507 is a plasticized polyamide 12 compound specially formulated for the extrusion of flexible tubing and hoses in oil and petrochemical applications. This heat- and light-stabilized compound complies with DIN 73-378, Type: PA 12-PHL, for tubing. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured with exceptional impact strength, a low coefficient of friction, and good chemical resistance, parts made from VESTAMID® L2124 BK 9.7507 exhibit outstanding performance. With its high melt viscosity and precise dimensional control during pipe extrusion, this semi-crystalline material provides reliability and ease of processing. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® L2124 BK 9.7507 is ready for seamless integration into your production process.

VESTAMID® L2140 BK 9.7504

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding, Profile Extrusion, Extrusion
Additives Included:Lubricant (Unspecified), Light Stabilizer, Heat Stabilizer, UV Stabilizer
Flexural Modulus:1570.92 - 1570.92 MPa
Materials Features:Good Thermal Stability, Low Coefficient of Friction, Oil Resistant, Electrically Insulating, Lubricated, Fuel Resistant, Light Stabilized, Good Light Stability, UV Stabilized, Chemical Resistant, Semi Crystalline, Unreinforced, Heat Stabilized, Good Weather Stability, Very Good Heat Resistance, Good Impact Strength, UV Resistant, Low Moisture Absorption, High Viscosity
Color:Black

VESTAMID® L2140 BK 9.7504 is a heat- and light-stabilized polyamide 12 compound designed for extrusion of tubing and semi-finished products such as fuel lines. The properties of this material are minimally affected by changing humidity due to its low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance.

VESTAMID® LX9001 BK 9.7504

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding, Coating, Extrusion Coating, Extrusion
Additives Included:Light Stabilizer, Heat Stabilizer, Bonding Agent
Flexural Modulus:1701.83 - 1701.83 MPa
Materials Features:Good Thermal Stability, Oil Resistant, Electrically Insulating, Excellent Light Stability, Low Water Absorption, Fuel Resistant, Dimensional Stability, Light Stabilized, Good Light Stability, Chemical Resistant, Good Adhesion, Heat Stabilized, Good Weather Stability, Very Good Heat Resistance, Good Impact Strength, UV Resistant, Corrosion Resistant, High Viscosity, Good Abrasion Resistance
Color:Black

VESTAMID® LX9001 BK 9.7504 is a heat-stabilized and light-resistant PA 12 compound specifically developed for the extrusion coating of steel tubes. This compound enhances the corrosion resistance of steel tubes through its exceptional impact strength, abrasion resistance, and chemical resistance. The excellent adhesion between the steel and the properly applied VESTAMID® LX9001 BK 9.7504 further contributes to this increased corrosion resistance. Additionally, VESTAMID® LX9001 BK 9.7504 offers the advantages of low water absorption, good dimensional stability, and consistent properties even in changing ambient humidity. Supplied as cylindrical pellets in moisture-proof packaging, they are ready for seamless processing. Experience the exceptional qualities of VESTAMID® LX9001 BK 9.7504 and enhance the performance and durability of steel tubes with its reliable coating solution.

VESTAMID® LX9008 BK 9.7504

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding, Tubing Extrusion, Pipe Extrusion, Profile Extrusion, Extrusion
Additives Included:Heat Stabilizer
Flexural Modulus:1191.97 - 1191.97 MPa
Materials Features:Good Thermal Stability, Oil Resistant, Electrically Insulating, Heat Stabilized, Fuel Resistant, Dimensional Stability, Good Weather Stability, Very Good Heat Resistance, Good Light Stability, UV Resistant, Low Moisture Absorption, High Viscosity, Flexible, Unreinforced
Color:Black

VESTAMID® LX9008 BK 9.7504 is a plasticizer-free polyamide 12 compound renowned for its exceptional long-term resistance under thermal load. This compound is specifically designed for the production of flexible tubes exposed to higher temperatures, making it ideal for applications in the engine compartment of motor vehicles. When utilized as diesel fuel lines, VESTAMID® LX9008 BK 9.7504 demonstrates significant advantages over standard grades, as evident in storage tests with diesel fuel. With low moisture absorption, this material maintains the dimensions and properties of finished parts even in changing ambient conditions. However, when using VESTAMID® LX9008 BK 9.7504 for fuel lines, certain prerequisites must be considered. Experience the outstanding long-term thermal resistance and reliability of VESTAMID® LX9008 BK 9.7504 for your demanding applications.

VESTAMID® LX9013 BK 9.7507

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding, Pipe Extrusion, Tubing Extrusion, Profile Extrusion, Extrusion
Additives Included:Plasticizer (Unspecified), Impact Modifier, Heat Stabilizer
Flexural Modulus:399.62 - 399.62 MPa
Materials Features:Good Thermal Stability, Low Temperature Impact Resistance, Oil Resistant, Impact Modified, Electrically Insulating, Fuel Resistant, Dimensional Stability, Good Light Stability, Chemical Resistant, Flexible, Unreinforced, Heat Stabilized, Good Weather Stability, Very Good Heat Resistance, Good Impact Strength, UV Resistant, Low Moisture Absorption, Impact Resistance, High Viscosity, Plasticized
Color:Black

VESTAMID® LX9013 BK 9.7507 is a plasticized polyamide 12 compound with exceptionally high long-term resistance under thermal load. It has low moisture absorption, resulting in minimal dimensional and property changes under changing ambient conditions. Extruded tubes made from VESTAMID® LX9013 BK 9.7507 are impact-resistant, even at low temperatures. This material is suitable for producing flexible tubes that are consistently exposed to higher temperatures, such as in the engine compartment of motor vehicles.

VESTAMID® LX9112 BK

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding, Coating, Extrusion Coating, Extrusion
Additives Included:Light Stabilizer, Heat Stabilizer, Conductive Agent, Bonding Agent
Flexural Modulus:1901.64 - 1901.64 MPa
Materials Features:Good Thermal Stability, Oil Resistant, Excellent Light Stability, Fuel Resistant, Electrically Conductive, Anti-Static, Light Stabilized, Good Extrusion Properties, Good Light Stability, Low Melt Viscosity, Chemical Resistant, ESD Protection, Unreinforced, Heat Stabilized, Good Weather Stability, Very Good Heat Resistance, Good Impact Strength, Conductive, UV Resistant, Corrosion Resistant, Good Abrasion Resistance
Color:Black

VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound specifically developed for the pore-free extrusion coating of steel tubing. It stands out from commonly used conductive extrusion compounds due to its significantly lower melt viscosity and outstanding extrusion characteristics, even in very thin coatings.

VESTAMID® MLT 4300

Polymer Name:PA 12/ EVOH/ PA 6 (Polyamide 12/ Ethylene Vinyl Alcohol Copolymer / Polyamide 6)
Physical Form:Solid, Tube, Pellets, Granules
Features:Oil Resistant, Good Thermal Stability, Low Temperature Impact Resistance, Permeation Resistant, Fuel Resistant, Good Barrier Properties
Color:Black
Materials Features:Oil Resistant, Fuel Resistant, Permeation Resistant, Low Temperature Impact Resistance, Good Thermal Stability, Good Barrier Properties

VESTAMID® MLT 4300 is an established 4-layer tube for automotive fuel handling systems. It is a multilayer tubing system with an outer layer of VESTAMID® polyamide 12 and a barrier layer of ethylene vinyl alcohol (EVOH). VESTAMID® MLT 4300 offers excellent permeation resistance against ethanol-containing fuels and good cold impact performance.

VESTAMID® MLT 4500

Polymer Name:PA 12/ EVOH/ PA 12 (Polyamide 12/ Ethylene Vinyl Alcohol Copolymer / Polyamide 12)
Physical Form:Solid, Tube, Pellets, Granules
Features:Electrically Insulating, Oil Resistant, Good Thermal Stability, Conductive, Low Temperature Impact Resistance, Permeation Resistant, Fuel Resistant, Good Barrier Properties, Anti-Static
Color:Black
Materials Features:Oil Resistant, Fuel Resistant, Electrically Insulating, Conductive, Permeation Resistant, Low Temperature Impact Resistance, Good Thermal Stability, Good Barrier Properties, Anti-Static

VESTAMID® MLT 4500 is a well-established 5-layer tube designed for automotive fuel handling systems. This system features an outer and inner layer of VESTAMID® polyamide 12, providing excellent performance and durability. The MLT 4500 series also incorporates a barrier layer of ethylene vinyl alcohol (EVOH), offering superior permeation resistance against alcohol-containing fuels. Additionally, it delivers exceptional cold impact performance, ensuring reliable operation even in challenging conditions. In specific regions where antistatic properties are required, the multilayer tubing system (MLT) 4540 is available. Based on the same design, the MLT 4540 includes a conductive VESTAMID® polyamide 12 inner layer to fulfill the antistatic requirements. Experience the reliability and versatility of the MLT 4500 series and MLT 4540 in automotive fuel handling systems, ensuring efficient fuel transport and meeting the specific needs of your applications.

VESTAMID® MLT 4540

Polymer Name:PA 12/ EVOH/ PA 12 (Polyamide 12/ Ethylene Vinyl Alcohol Copolymer / Polyamide 12)
Physical Form:Solid, Tube, Pellets, Granules
Features:Unreinforced, Oil Resistant, Good Thermal Stability, Conductive, Low Temperature Impact Resistance, Permeation Resistant, Electrically Conductive, Fuel Resistant, Good Barrier Properties, Anti-Static
Color:Black
Materials Features:Oil Resistant, Unreinforced, Fuel Resistant, Conductive, Permeation Resistant, Electrically Conductive, Low Temperature Impact Resistance, Good Thermal Stability, Good Barrier Properties, Anti-Static

VESTAMID® MLT 4540 is an established 5-layer tube used in automotive fuel handling systems. It consists of an outer and inner layer of VESTAMID® polyamide 12 and a barrier layer of ethylene vinyl alcohol (EVOH). The VESTAMID® MLT 4540 offers good permeation resistance against alcohol-containing fuels and excellent cold impact performance.

VESTAMID® MLT 4800

Polymer Name:PA 12/ EVOH/ PA 612 (Polyamide 12/ Ethylene Vinyl Alcohol Copolymer / Polyamide 612)
Physical Form:Solid, Tube, Pellets, Granules
Features:Low Extractables, Oil Resistant, Good Thermal Stability, Conductive, Low Temperature Impact Resistance, Fuel Resistant, Good Barrier Properties, Anti-Static
Color:Black
Materials Features:Oil Resistant, Low Extractables, Fuel Resistant, Conductive, Low Temperature Impact Resistance, Good Thermal Stability, Good Barrier Properties, Anti-Static

VESTAMID® MLT 4800 is an innovative 'low extractable' 5-layer tube designed for automotive fuel handling systems. It consists of an outer layer of VESTAMID® polyamide 12, a barrier layer of ethylene vinyl alcohol (EVOH), and an inner layer of VESTAMID® polyamide 612. VESTAMID® MLT 4800 offers excellent barrier properties against ethanol-containing fuels and has very low extractables. It exhibits excellent cold impact properties, like all Evonik multilayer systems.

VESTAMID® MLT 7400

Polymer Name:PA 12/ EVOH/ EFEP (Polyamide 12/ Ethylene Vinyl Alcohol Copolymer / Ethylene Tetrafluoroethylene Copolymer)
Physical Form:Granules, Solid, Tube, Pellets
Features:Fuel Resistant, Good Barrier Properties, Anti-Static, Chemical Resistant, Low Extractables, Oil Resistant, Good Thermal Stability, Conductive
Color:Black
Materials Features:Good Thermal Stability, Good Barrier Properties, Anti-Static, Oil Resistant, Low Extractables, Fuel Resistant, Conductive, Chemical Resistant

VESTAMID® MLT 7400 is a proven 5-layer tube designed specifically for fuel handling systems in the automotive industry. This innovative system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. The combination of these materials provides exceptional resistance to alcohol-containing fuels, superior chemical resistance on the inner tube surface, and virtually zero extraction levels. VESTAMID® MLT 7400 delivers reliable performance and durability. It comes in the form of pellets or granules, allowing for easy integration into manufacturing processes. With its excellent thermal stability and resistance to oil and fuels, this tube finds extensive applications in the automotive and mobility sectors.

VESTAMID® MLT 7440

Polymer Name:PA 12/ EVOH/ EFEP (Polyamide 12/ Ethylene Vinyl Alcohol Copolymer / Ethylene Tetrafluoroethylene Copolymer)
Physical Form:Granules, Solid, Tube, Pellets
Features:Good Thermal Stability, Conductive, Electrically Conductive, Fuel Resistant, Good Barrier Properties, Anti-Static, Chemical Resistant, Low Extractables, Oil Resistant
Color:Black
Materials Features:Conductive, Chemical Resistant, Electrically Conductive, Good Thermal Stability, Good Barrier Properties, Anti-Static, Oil Resistant, Low Extractables, Fuel Resistant

VESTAMID® MLT 7440 is an automotive industry-proven 5-layer tube specifically designed for fuel handling systems. This system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. With excellent resistance properties against alcohol-containing fuels, the MLT 7400 offers superior chemical resistance on the inner tube surface and a close-to-zero extraction level. In certain regions, antistatic properties may be required, which are fulfilled by the multilayer tubing system (MLT) 7440. Based on the same design, the MLT 7440 incorporates a conductive fluoropolymer EFEP NEOFLONTM inner layer. Experience the reliability and exceptional performance of the multilayer tubing systems (MLT) 7400 and (MLT) 7440 in fuel handling systems, ensuring superior fuel resistance and meeting the specific requirements of your automotive applications.

VESTAMID® MLT 4840

Polymer Name:PA 12/ EVOH/ PA 612 (Polyamide 12/ Ethylene Vinyl Alcohol Copolymer / Polyamide 612)
Physical Form:Solid, Tube, Pellets, Granules
Features:Low Extractables, Electrically Insulating, Light Weight, High Hydrolytic Stability, Good Thermal Stability, Hydrolysis Resistant, Conductive, Low Temperature Impact Resistance, Hot Water Resistant, Good Barrier Properties, Anti-Static
Materials Features:Low Extractables, Hydrolysis Resistant, Light Weight, Electrically Insulating, High Hydrolytic Stability, Conductive, Hot Water Resistant, Low Temperature Impact Resistance, Good Thermal Stability, Good Barrier Properties, Anti-Static

VESTAMID® MLT 7840 is an innovative 'low extractable' 5-layer tube designed for automotive fuel handling systems. It features high thermal stability, resistance to oil and fuels, and excellent barrier properties. It is resistant to fuel and finds applications in the automotive and mobility sectors.

VESTAMID® MLT 8000

Polymer Name:PA 12/ PP (Polyamide 12/ Polypropylene)
Physical Form:Solid, Tube, Pellets, Granules
Features:Excellent Hydrolysis Resistance, Electrically Insulating, Light Weight, High Hydrolytic Stability, Good Thermal Stability, Hydrolysis Resistant, Low Temperature Impact Resistance, Hot Water Resistant
Materials Features:Excellent Hydrolysis Resistance, Hydrolysis Resistant, Light Weight, Electrically Insulating, High Hydrolytic Stability, Hot Water Resistant, Low Temperature Impact Resistance, Good Thermal Stability

VESTAMID® MLT 8000 is a proven 3-layer system for thermal management systems in the automotive industry. It consists of an outer layer of VESTAMID® polyamide 12 and a special polypropylene inner layer. The product offers high hydrolysis resistance against coolant liquids and urea solutions, good cold impact performance, and significant weight savings compared to less innovative concepts such as metal or rubber hoses.

VESTAMID® MLT 8EV

Polymer Name:PA 12/ PP (Polyamide 12/ Polypropylene)
Physical Form:Granules, Solid, Tube, Pellets
Features:Good Impact Strength, Light Weight, High Hydrolytic Stability, Good Thermal Stability, Hydrolysis Resistant, Crack Resistant, Low Temperature Impact Resistance, Cost Effective, Impact Resistance, Electrically Insulating, Excellent Mechanical Strength, Easier Processing, Good Aging Behavior, Corrosion Resistant, Hot Water Resistant, High Strength
Tensile Modulus:750.0 - 750.0 MPa
Materials Features:Corrosion Resistant, Hydrolysis Resistant, Cost Effective, High Hydrolytic Stability, Easier Processing, Good Aging Behavior, Impact Resistance, Light Weight, Good Impact Strength, Electrically Insulating, Hot Water Resistant, Excellent Mechanical Strength, High Strength, Crack Resistant, Low Temperature Impact Resistance, Good Thermal Stability

VESTAMID® MLT 8EV is a proven 3-layer system designed for thermal management systems in the automotive industry. It is particularly suited for battery electric vehicles (BEVs), where thermal management of the battery, E-motor, or power electronics is crucial. The VESTAMID® MLT 8EV offers a cost-effective composition for cooling line applications, meeting the specific requirements of BEVs.

VESTAMID® NRG 1001

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Additives Included:Plasticizer (Unspecified), Impact Modifier, Light Stabilizer, Heat Stabilizer
Processing Methods:Profile Extrusion, Injection Molding, Pipe Extrusion, Extrusion, Tubing Extrusion
Materials Features:Light Stabilized, Hydrolysis Resistant, Low Coefficient of Friction, Unreinforced, Semi Crystalline, UV Resistant, Easier Processing, Good Weather Stability, Very Good Heat Resistance, Impact Resistance, Oil Resistant, Plasticized, High Viscosity, Heat Stabilized, Low Moisture Absorption, Fuel Resistant, Good Impact Strength, Impact Modified, Dimensional Stability, Hot Water Resistant, Good Light Stability, Chemical Resistant, Flexible
Color:Natural

VESTAMID® NRG 1001 is a high-viscosity, plasticized, and impact-modified PA 12 compound with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. It offers easy processing and good dimensional control during pipe extrusion, especially for large pipe diameters.

VESTAMID® NRG 2101 YE

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Additives Included:Light Stabilizer, Heat Stabilizer, UV Stabilizer
Processing Methods:Profile Extrusion, Injection Molding, Pipe Extrusion, Extrusion, Tubing Extrusion
Materials Features:Corrosion Resistant, Light Stabilized, Hydrolysis Resistant, Unreinforced, Cost Effective, Semi Crystalline, UV Resistant, High Molecular Weight, Fatigue Resistant, Good Environmental Stress Crack Resistance (ESCR), Ozone Resistant, High Performance, UV Stabilized, Solvent Resistant, Good Weather Stability, High Melt Strength, Grease Resistant, Very Good Heat Resistance, Good Aging Behavior, Oil Resistant, High Viscosity, Heat Stabilized, Weldable, Hydrocarbon Resistant, Durable, Fuel Resistant, Good Impact Strength, Electrically Insulating, Hot Water Resistant, Good Light Stability, Chemical Resistant, Excellent Toughness, Crack Resistant, Good Thermal Stability
Color:Yellow

VESTAMID® NRG 2101 YE is a high-molecular-grade PA-12 material developed by Evonik. It is designed for use in thermoplastic piping systems at higher operating pressures and larger diameters, replacing metallic piping systems in a safe and cost-effective manner. It offers superior performance characteristics.

VESTAMID® NRG 2901 BK

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Additives Included:Heat Stabilizer, Nucleating Agent
Processing Methods:Injection Molding, Pipe Extrusion, Extrusion, Tubing Extrusion
Materials Features:Shorter Cycle Time, Hydrolysis Resistant, Excellent Mold Release, Low Coefficient of Friction, Unreinforced, Semi Crystalline, UV Resistant, High Performance, Good Weather Stability, Very Good Heat Resistance, Oil Resistant, High Viscosity, Heat Stabilized, Nucleated, Low Moisture Absorption, Fuel Resistant, Low Friction, Good Impact Strength, Low Shrinkage, Hot Water Resistant, Good Light Stability, Chemical Resistant, Good Abrasion Resistance, Good Thermal Stability
Color:Black

VESTAMID® NRG 2901 BK is a high-viscosity, heat-stabilized compound with exceptional mold release properties. It is nucleated to reduce cycle time and shrinkage of molded parts. It is commonly used for gas pipes and fittings, with a proven record of safe and reliable performance in demanding applications, including fuel lines in passenger cars, air brake tubing in trucks, and offshore applications.

VESTAMID® NRG 3001 NC

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Additives Included:Heat Stabilizer, Light Stabilizer
Processing Methods:Extrusion, Injection Molding, Pipe Extrusion
Materials Features:Light Stabilized, Oil Resistant, Hydrolysis Resistant, High Viscosity, Heat Stabilized, Unreinforced, Excellent Compatibility, Fuel Resistant, UV Resistant, Dimensional Stability, Hot Water Resistant, Good Light Stability, Easier Processing, Good Weather Stability, Good Thermal Stability, Very Good Heat Resistance
Color:Natural

VESTAMID® NRG 3001 NC is a polyamide 12 compound specifically developed for the manufacturing of hydrocarbon transport piping systems and liners. This material offers easy processing and excellent dimensional control during pipe extrusion, particularly for large diameter pipes. VESTAMID® NRG 3001 demonstrates exceptional compatibility with hydrocarbons such as crude oil, as well as oilfield chemicals like paraffin inhibitors. As a result, it delivers high dimensional stability and maintains unaffected properties for parts in contact with these substances. Experience the reliability and performance of VESTAMID® NRG 3001 in your hydrocarbon transport applications. Choose VESTAMID® NRG 3001 for its superior properties, easy processing, and excellent dimensional control, ensuring optimal performance and durability in your piping systems and liners.

VESTAMID® NRG 5901 BK

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Additives Included:UV Stabilizer
Processing Methods:Profile Extrusion, Injection Molding, Pipe Extrusion, Extrusion, Tubing Extrusion
Materials Features:Corrosion Resistant, Abrasion Resistant, Wear Resistant, Hydrolysis Resistant, Low Coefficient of Friction, Unreinforced, Cost Effective, UV Resistant, High Molecular Weight, Fatigue Resistant, High Temperature Application, High Performance, UV Stabilized, Good Weather Stability, Oil Resistant, High Viscosity, Weldable, Hydrocarbon Resistant, Durable, Fuel Resistant, Light Weight, Good UV Resistance, High Pressure Applications, Hot Water Resistant, Good Light Stability, Chemical Resistant, Excellent Toughness, Crack Resistant, Outdoor Durability, Good Thermal Stability, Good Barrier Properties
Color:Black

VESTAMID® NRG 5901 BK is a high-molecular-weight PA-12 material developed by Evonik. This exceptional material offers superior performance characteristics, making it an ideal choice for expanding the use of thermoplastic piping systems. With its ability to handle higher operating pressures and larger diameters, VESTAMID® NRG 5901 BK provides a safe and cost-effective alternative to metallic piping systems. In addition to extending the operating pressure limits of thermoplastic piping systems, it offers numerous benefits and, in many cases, outperforms conventional PE piping systems. Experience the reliability, durability, and enhanced performance of VESTAMID® NRG 5901 BK in your piping applications. Choose VESTAMID® NRG 5901 BK for its superior properties and cost-effective solution, ensuring the safe and efficient operation of your thermoplastic piping systems.

VESTAMID® Terra DS16 NC

Polymer Name:Polyamide 1010 (PA 1010)
Processing Methods:Injection Molding, Extrusion
Additives Included:Heat Stabilizer
Materials Features:High Melting Point, Heat Stabilized, Dimensional Stability, Good Mechanical Properties, Excellent Transparency Properties, Chemical Resistant, Semi Crystalline, Renewable Resource Content, Low Water Absorption, High Heat Deflection Temperature, Medium Viscosity

VESTAMID® Terra DS16 NC is a medium-viscosity PA 1010 basic polymer. It is semi-crystalline, which contributes to its high mechanical resistance and chemical stability. It has low water absorption and excellent dimensional stability. VESTAMID® Terra DS16 is suitable for manufacturing films with good transparency.

VESTAMID® X7167

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding, Profile Extrusion, Extrusion
Additives Included:Heat Stabilizer, Flame Retardant, Lubricant (Unspecified)
Flexural Modulus:1756.95 - 1756.95 MPa
Materials Features:Good Thermal Stability, General Purpose, Lubricated, Heat Stabilized, Very Good Heat Resistance, Flame Retardant, High Viscosity, Flame Resistant, Self Extinguishing
Color:Natural

VESTAMID® X7167 NC is a high-quality polyamide 12 (PA12) compound formulated for exceptional heat stability and flame retardancy. This compound incorporates a non-migrating flame retardant that is free of halogens and phosphorous, making it an ideal choice for interior parts in aircraft, railways, and ships. VESTAMID® X7167 NC meets the stringent requirements of FAR 25.853 or ABD 0031, ensuring compliance and safety in these demanding applications. This versatile resin can be processed through extrusion or injection molding methods. However, it is important to note that the melt temperature should not exceed 260 °C to maintain the effectiveness of the flame retardant. We recommend melt temperatures within the range of 210–230 °C for optimal performance. VESTAMID® X7167 NC is conveniently supplied as cylindrical pellets, packaged in moisture-proof bags, ready for immediate use. Trust VESTAMID® X7167 NC for reliable and flame-resistant solutions in interior component manufacturing.

VESTAMID® X7293

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding, Pipe Extrusion, Tubing Extrusion, Profile Extrusion, Extrusion
Additives Included:Plasticizer (Unspecified), Impact Modifier, Lubricant (Unspecified), Light Stabilizer, Heat Stabilizer
Flexural Modulus:399.62 - 399.62 MPa
Materials Features:Good Thermal Stability, Low Coefficient of Friction, Low Temperature Impact Resistance, Oil Resistant, Impact Modified, Electrically Insulating, Lubricated, Fuel Resistant, Light Stabilized, Easier Processing, Good Light Stability, Chemical Resistant, Semi Crystalline, Flexible, Unreinforced, Heat Stabilized, Good Weather Stability, Very Good Heat Resistance, Good Impact Strength, UV Resistant, Low Moisture Absorption, Impact Resistance, High Viscosity, Plasticized
Color:Natural

VESTAMID® X7293 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is known for its easy processing and high impact strength at low temperatures.

VESTAMID® X7293 BK 9.7507

Polymer Name:Polyamide 12 (PA 12)
Processing Methods:Injection Molding, Pipe Extrusion, Tubing Extrusion, Profile Extrusion, Extrusion
Additives Included:Plasticizer (Unspecified), Impact Modifier, Lubricant (Unspecified), Light Stabilizer, Heat Stabilizer
Flexural Modulus:399.62 - 399.62 MPa
Materials Features:Good Thermal Stability, Low Coefficient of Friction, Low Temperature Impact Resistance, Oil Resistant, Impact Modified, Electrically Insulating, Lubricated, Fuel Resistant, Light Stabilized, Easier Processing, Good Light Stability, Chemical Resistant, Semi Crystalline, Flexible, Unreinforced, Heat Stabilized, Good Weather Stability, Very Good Heat Resistance, Good Impact Strength, UV Resistant, Low Moisture Absorption, Impact Resistance, High Viscosity, Plasticized
Color:Black

VESTAMID® X7293 BK 9.7507 is a plasticized polyamide 12 compound formulated with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly suited for automotive applications. This compound conforms to standards such as DIN 73378 (PA 12-HIPHL, Type 1), ISO/DIN 7628-1 (PA 12-HIPEHL, Type 1), and SAE J844. VESTAMID® X7293 BK 9.7507 offers easy processing and high impact strength at low temperatures. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured from this semicrystalline material, parts exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® X7293 BK 9.7507 is conveniently ready for use. Choose VESTAMID® X7293 BK 9.7507 for its reliability and superior performance in extrusion applications, ensuring excellent results for your automotive tubing and hose needs.

Knowde Brand Summary

Identification

Additives Included: Anti-Static Agent,
Bonding Agent,
Conductive Agent,
Flame Retardant,
Heat Stabilizer,
Impact Modifier,
Light Stabilizer,
Lubricant (Unspecified),
Nucleating Agent,
Plasticizer (Unspecified),
Processing Aid,
Release agent,
UV Stabilizer
Chemical Family: Polyamides
Fillers Included: Glass Fiber,
Milled Glass Fiber
Polymer Name: PA 12/ EVOH/ EFEP (Polyamide 12/ Ethylene Vinyl Alcohol Copolymer / Ethylene Tetrafluoroethylene Copolymer) ,
PA 12/ EVOH/ PA 12 (Polyamide 12/ Ethylene Vinyl Alcohol Copolymer / Polyamide 12),
PA 12/ EVOH/ PA 6 (Polyamide 12/ Ethylene Vinyl Alcohol Copolymer / Polyamide 6),
PA 12/ EVOH/ PA 612 (Polyamide 12/ Ethylene Vinyl Alcohol Copolymer / Polyamide 612),
PA 12/ PP (Polyamide 12/ Polypropylene) ,
Polyamide 1010 (PA 1010),
Polyamide 12 (PA 12),
Polyamide 612 (PA 612)
Technologies: Composite Materials,
Plastics
Product Families: Engineering & Specialty Polymers
Polyamides
Parts, Shapes & Films
Polymers & Resins
Thermoplastic Resins
Composite Materials Functions: Resins, Binders & Matrix Materials
Plastics & Elastomers Functions: Resin

Features & Benefits

Labeling Claims: Bio-based,
Food Contact Acceptable,
Halogen-free,
Low Carbon Footprint (PCF),
Natural,
Phosphorus-free,
Plasticizer-free,
Sustainable

Applications & Uses

Markets: Automotive & Transportation,
Consumer Goods,
Electrical & Electronics,
Healthcare & Pharma,
Industrial
Applications: Automotive
Cooling & Climate,
Fuel Systems
Chemical & Industrial Manufacturing
Equipment & Parts
Cold-Chain & Insulation
Medical
Medical Devices & Assemblies
Oil, Gas & Mining
Enhanced Oil Recovery,
Exploration & Upstream,
Midstream,
Mining,
Other Oil, Gas & Mining Applications,
Refining & Gas Processing
Parts & Components
Batteries,
Connectors
Sports & Recreation
Transportation
Aerospace & Aviation,
Marine,
Rail & Mass Transit
Wire & Cable
Jacketing & Insulation
Plastics & Elastomers End Uses: Aerospace Applications,
Aircraft Interiors,
Automotive Applications,
Automotive Coolant Pipes,
Automotive Fuel Lines,
Cable Insulation,
Cable Jacketing,
Cable Ties,
Connectors,
EV Battery Coolant Pipes,
EV Battery Management System,
Electric Motors,
Electric Vehicles,
Electrical/Electronic Applications,
Energy Storage,
Engine Systems,
Film,
Fittings,
Hoses,
Hydraulic Clutch Lines,
Industrial Applications,
Liners,
Medical Devices,
Monofilaments,
Natural Gas Distribution,
Offshore Applications,
Oil/Gas Applications,
Pipe Fitting,
Pipes,
Refrigeration,
Sporting Goods,
Strip Clips,
Thermal Management,
Toothbrush Bristles,
Tubes,
Wire Jacketing
Plastics & Elastomers Processing Methods: Cable Extrusion,
Coating,
Coextrusion,
Extrusion,
Extrusion Coating,
Filament Extrusion,
Injection Molding,
Pipe Extrusion,
Profile Extrusion,
Thermoforming,
Tubing Extrusion,
Wire Extrusion

Knowde Brand Highlights

Product Handling: VESTAMID® compounds are delivered dry in moisture-proof bags or in octabins. Therefore, further drying before processing is not required. The compounds will absorb moisture from the atmosphere. The amount absorbed depends on the ambient conditions of the area where they are used. During processing, a dehumidifying hopper dryer is therefore recommended. The temperature may be set at 60 to 80°C. Granules from opened or damaged bags must be dried in a desiccant type dryer for a minimum of 2 hours at 120 to 125°C for VESTAMID® at 90 to 100°C, or on trays in layers not exceeding 2 to 3 cm thickness at a tempe- rature of 120°C for VESTODUR® and 90 to 100 °C for VESTAMID® in a circulating air oven for about 5 hours. The moisture content must not exceed 0.05 % for or 0.10 % for VESTAMID®.
Brand Benefits: Low water absorption

Very high chemical resistance. (e.g. against fuels, oils, filling compound, petro jelly)

High hydrolysis resistance

Excellent cold impact performance

High hardness and abrasion resistance

High dynamic load behavior

Excellent properties in case of fire (with flame retardant)

High line speeds (up to 400 m/min)

High stability during extrusion (less scrap)

Fast crystallization for better fiber excess length control

High chemical resistance (filling compound, inhibits H2O penetration)

Good hydrolysis resistance

In compliance with Belcore test (85 °C / 85 % r.h.)

High flexibility / bending radius

Low weight

Low water absorption

Very high chemical resistance

High hydrolysis resistance

Excellent burning properties (two-layer system)

Two layers avoid migration of additives (no attenuation)