Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Flame Rating
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Test Specimen Production
- Rheological Properties
- Burn Testing Properties
| Value | Units | Test Method / Conditions | |
| Tensile Modulus (dry) | 363000 | psi | ISO 527 |
| Tensile Strength (dry) | 8120 | psi | ISO 527 |
| Yield Stress (dry) | 8120 | psi | ISO 527 |
| Yield Strain (dry) | 4 | % | ISO 527 |
| Stress at 50% Strain (dry) | 4790 | psi | ISO 527 |
| Stress at Break (dry) | 4930 | psi | ISO 527 |
| Nominal Strain at Break (ɛtb, dry) | min. 50 | % | ISO 527 |
| Tensile Creep Modulus (0.5% Strain, 1h, cond.) | 377000 | psi | ISO 899-1 |
| Tensile Creep Modulus (0.5% Strain, 1000h, cond.) | 218000 | psi | ISO 899-1 |
| Charpy Notched Impact Strength (+23°C, dry) | 2.38 | ftlb/in² | ISO 179/1eA |
| Charpy Notched Impact Strength (-30°C, dry) | 19 | ftlb/in² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density (dry) | 1.31 | g/cm³ | ISO 1183 |
| Water Absorption (dry) | 0.45 | % | Sim. to 1SO 62 |
| Humidity Absorption (dry) | 0.15 | % | Sim. to 1SO 62 |
| Shore D Hardness (dry) | 77 (3 sec) | — | ISO 7619-1 |
| Value | Units | Test Method / Conditions | |
| Melting Temperature (dry) | 433 | °F | ISO 11357-1/-3 |
| Glass Transition Temperature (dry) | 113 | °F | ISO 11357-1/-2 |
| Temperature of Deflection Under Load A (1.80 Mpa, dry) | 131 | °F | ISO 75-1/-2 |
| Temperature of Deflection Under Load B (0.45 Mpa, dry) | 275 | °F | ISO 75-1/-2 |
| Vicat Softening Temperature A (10 N, 50 K/h, dry) | 428 | °F | ISO 306 |
| Vicat Softening Temperature B (50 N, 50 K/h, dry) | 356 | °F | ISO 306 |
| Coefficient of Linear Thermal Expansion (23°C to 55 °C, Parallel, dry) | 6.11e-05 | in/in/°F | ISO 11359-1/-2 |
| Coefficient of Linear Thermal Expansion (23°C to 55 °C, Normal, dry) | 6.11e-05 | in/in/°F | ISO 11359-1/-2 |
| Value | Units | Test Method / Conditions | |
| Surface Resistivity (σE, cond.) | 10000000000000 | Ohm | IEC 62631-3-2 |
| Surface Resistance (RSD, dry) | 10000000000000 | Ohm | IEC 62631-3-2 |
| Relative Permittivity (100Hz, dry) | 33 | — | IEC 62631-2-1 |
| Relative Permittivity (1MHz, dry) | 3.5 | — | IEC 62631-2-1 |
| Dissipation Factor (100Hz, dry) | 20 | E-4 | IEC 62631-2-1 |
| Dissipation Factor (1Mhz, dry) | 230 | E-4 | IEC 62631-2-1 |
| Electric Strength (AC, S20/S20, t. 1 mm, dry) | 686 | kV/in | IEC 60243-1 |
| Comparative Tracking Index (Test Solution A, 50 Drops Value, dry) | 600 | — | IEC 60112 |
| Value | Units | Test Method / Conditions | |
| Processing Conditions | 7792 | — | ISO ....-2 |
| Injection Molding - Melt Temperature | 500 | °F | ISO 294 |
| Injection Molding - Mold Temperature | 176 | °F | ISO 294 |
| Injection Molding - Injection Velocity | 7.87 | in/s | ISO 294 |
| Injection Molding - Pressure at Hold | 10200 | psi | ISO 294 |
| Value | Units | Test Method / Conditions | |
| Melt Volume Flow Rate (dry, at 482°F, 4.76lb) | 9 | cm³/10min | ISO 1133 |
| Molding Shrinkage (Parallel, dry) | 1.7 | % | ISO 294-4, 2577 |
| Molding Shrinkage (Normal, dry) | 1.7 | % | ISO 294-4, 2577 |
| Mold Temperature (dry) | 176 | °F | — |
| Value | Units | Test Method / Conditions | |
| Burning Behavior (at 1.5 mm Nominal Thickness) (dry) | HB | class | IEC 60695-11-10 |
| Burning Behavior (at Thickness 0.0315 in.) (dry) | HB | class | IEC 60695-11-10 |
| Oxygen Index (dry) | 23 | % | ISO 4589-1/-2 |
| Limiting Oxygen Index | 23 | % | ASTM D 2863 |
Packaging & Availability
- Packaging Information
VESTODUR® 3030 is supplied as cylindrical pellets in polyethylene packaging, ready for processing.
Storage & Handling
- Shelf Life
- 2 years
- Storage Conditions
Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.