Products

VESTAMID® DX9330 NC is a PA 612 base polymer that does not contain any stabilizers or additives. This versatile material is suitable for both extrusion and injection molding applications. VESTAMID® DX9330 NC is primarily used in special cases where additives are not preferred or processing aids are unnecessary, such as filament extrusion. With its optimal balance of amino and carboxyl end groups, this material offers ease of processing and dyeability. PA 612 is known for its moderate water absorption, good dimensional stability, and consistent properties in varying ambient humidity conditions. VESTAMID® DX9330 NC is supplied as cylindrical granules in moisture-proof bags, ready for seamless processing. Maintain a processing temperature range of 250°C to 290°C for optimal results. Choose VESTAMID® DX9330 NC for its reliability, versatility, and ease of processing in your specialized applications.

VESTAMID® NRG 1001 is a high-viscosity, plasticized, and impact-modified PA 12 compound with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. It offers easy processing and good dimensional control during pipe extrusion, especially for large pipe diameters.

VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound specifically developed for the pore-free extrusion coating of steel tubing. It stands out from commonly used conductive extrusion compounds due to its significantly lower melt viscosity and outstanding extrusion characteristics, even in very thin coatings.

VESTAMID® DX9304 BK E70238 is an extrusion compound specifically developed for the manufacturing of tubing systems that require higher heat resistance. With a melting point approximately 35 °C higher than PA 11 and PA 12 compounds, VESTAMID® DX9304 BK E70238 allows for elevated temperatures during use. This compound is particularly well-suited for extruding tubing systems that are exposed to high burst pressures and high service temperatures, such as hydraulic clutch lines. Thanks to its low moisture absorption, the dimensions and properties of parts remain largely unaffected by ambient conditions. Choose VESTAMID® DX9304 BK E70238 for its exceptional heat resistance, reliability, and ability to meet the demanding requirements of tubing systems.

VESTAMID® LX9008 BK 9.7504 is a plasticizer-free polyamide 12 compound renowned for its exceptional long-term resistance under thermal load. This compound is specifically designed for the production of flexible tubes exposed to higher temperatures, making it ideal for applications in the engine compartment of motor vehicles. When utilized as diesel fuel lines, VESTAMID® LX9008 BK 9.7504 demonstrates significant advantages over standard grades, as evident in storage tests with diesel fuel. With low moisture absorption, this material maintains the dimensions and properties of finished parts even in changing ambient conditions. However, when using VESTAMID® LX9008 BK 9.7504 for fuel lines, certain prerequisites must be considered. Experience the outstanding long-term thermal resistance and reliability of VESTAMID® LX9008 BK 9.7504 for your demanding applications.

VESTAMID® NRG 2101 YE is a high-molecular-grade PA-12 material developed by Evonik. It is designed for use in thermoplastic piping systems at higher operating pressures and larger diameters, replacing metallic piping systems in a safe and cost-effective manner. It offers superior performance characteristics.

VESTAMID® D18 is a medium-viscosity polyamide 612 compound that is specifically designed for extrusion and injection molding processes. It is commonly used for applications such as monofilaments, including toothbrush bristles. The material exhibits low water absorption, which contributes to the exceptional dimensional stability of components even when exposed to varying ambient humidity conditions. VESTAMID® D18 is suitable for profile extrusion processing techniques.

VESTAKEEP® 5000 P is a high-viscosity polyether ether ketone powder known for its outstanding thermal and chemical resistance. This unreinforced, semi-crystalline polymer offers superior performance in challenging environments. VESTAKEEP® 5000 P exhibits low flammability, ensuring enhanced safety. It is supplied as a powder conveniently packaged in boxes with moisture-proof polyethylene liners. Experience the reliability and versatility of VESTAKEEP® 5000 P for your specific applications. This high-viscosity powder delivers exceptional thermal and chemical resistance, making it suitable for a wide range of industrial uses. Choose VESTAKEEP® 5000 P for its superior properties and ease of handling in your projects.

TROGAMID® CX7323 NC is a specialized polyamide designed for injection molding applications. This microcrystalline transparent polyamide exhibits exceptional transparency to the human eye due to its extremely small crystallite size, which prevents the scattering of visible light. The material's crystalline structure also imparts outstanding crack resistance, ensuring durability and reliability in various manufacturing processes. TROGAMID® CX7323 is conveniently supplied as spherical pellets, packaged in polyethylene. This product allows for a certain degree of flexibility in molds and processing, enabling adjustments to accommodate specific cavity requirements or optimize the overall manufacturing process. With its unique properties, TROGAMID® CX7323 offers a reliable solution for the production of transparent parts through injection molding.

VESTAMID® L1670 is a low-viscosity polyamide 12 compound that has been specifically developed with heat and light stabilization for the extrusion of thin wire insulations and cable jacketings. Coatings made from VESTAMID® L1670 demonstrate a low coefficient of friction, which greatly facilitates the process of laying cables. This compound is well-suited for profile extrusion and wire and cable extrusion processing techniques.

VESTAMID® X7393 NC is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound used for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 NC exhibit optimized cold temperature impact resistance and increased burst pressure resistance in the extrusion of semi-rigid tubing. Additionally, it offers an exceptional low coefficient of friction and good chemical resistance.

VESTAMID® D16 is a medium-viscosity Polyamide 612 compound for extrusion and injection molding applications such as monofilaments (e.g., toothbrush bristles). The material based on PA612 absorbs only small amounts of water, resulting in excellent dimensional stability of components under changing ambient humidity.

VESTAMID® LX9013 BK 9.7507 is a plasticized polyamide 12 compound with exceptionally high long-term resistance under thermal load. It has low moisture absorption, resulting in minimal dimensional and property changes under changing ambient conditions. Extruded tubes made from VESTAMID® LX9013 BK 9.7507 are impact-resistant, even at low temperatures. This material is suitable for producing flexible tubes that are consistently exposed to higher temperatures, such as in the engine compartment of motor vehicles.

VESTAKEEP® 5000 G is a high-viscosity, unreinforced polyether ether ketone suitable for injection molding and extrusion. It is a semi-crystalline polymer with superior thermal and chemical resistance. Parts made from VESTAKEEP® 5000 G have low flammability and can be processed using standard machines for thermoplastics.

VESTAMID® X7297 BK 9.7507 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is characterized by easy processing and high impact strength at low temperatures.

VESTAMID® MLT 4540 is an established 5-layer tube used in automotive fuel handling systems. It consists of an outer and inner layer of VESTAMID® polyamide 12 and a barrier layer of ethylene vinyl alcohol (EVOH). The VESTAMID® MLT 4540 offers good permeation resistance against alcohol-containing fuels and excellent cold impact performance.

VESTODUR® 3030 is a high-viscosity polybutylene terephthalate (PBT) resin that is specially formulated for extrusion applications. It provides outstanding resistance to hydrolysis and heat. This compound is particularly suitable for the production of rigid, small-diameter tubing, including loose fiber optic buffer tubes. It is also compatible with film extrusion processes.

VESTAKEEP® 2000 G is a medium viscosity, unreinforced polyether ether ketone designed for injection molding applications. This semi-crystalline polymer offers superior thermal and chemical resistance, ensuring high-performance results. Parts manufactured from VESTAKEEP® 2000 G exhibit low flammability, enhancing safety. The material is compatible with common injection molding machines for thermoplastics, simplifying the manufacturing process. For optimal results, we recommend a melt temperature range of 360°C to 380°C during the injection molding process, with a mold temperature within 160°C to 200°C, preferably at 180°C. VESTAKEEP® 2000 G is supplied as granules in 25 kg boxes with moisture-proof polyethylene inliners, ensuring convenient storage and handling. Choose VESTAKEEP® 2000 G for its reliability, ease of processing, and exceptional properties, enabling the production of high-quality injection molded parts.

VESTAMID® X7293 BK 9.7507 is a plasticized polyamide 12 compound formulated with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly suited for automotive applications. This compound conforms to standards such as DIN 73378 (PA 12-HIPHL, Type 1), ISO/DIN 7628-1 (PA 12-HIPEHL, Type 1), and SAE J844. VESTAMID® X7293 BK 9.7507 offers easy processing and high impact strength at low temperatures. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured from this semicrystalline material, parts exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® X7293 BK 9.7507 is conveniently ready for use. Choose VESTAMID® X7293 BK 9.7507 for its reliability and superior performance in extrusion applications, ensuring excellent results for your automotive tubing and hose needs.

VESTAMID® X7293 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is known for its easy processing and high impact strength at low temperatures.

INFINAM® PEEK 9359 F is a filament created by extruding natural-colored VESTAKEEP® polyether ether ketone (PEEK) resin. This semi-crystalline polymer boasts exceptional thermal and chemical resistance. This material finds application in various industries, including aerospace and automotive. When used with fused deposition modeling (FDM) technology, it offers advantages such as reduced material consumption, improved mechanical properties of printed parts, and greater design flexibility for our customers.

VESTAKEEP® 3300 G High Purity is an unreinforced polyether ether ketone specifically designed for injection molding and extrusion. Refined using Evonik's advanced filtration technology, this medium-viscosity polymer offers exceptional thermal and chemical resistance. Parts manufactured with VESTAKEEP® 3300 G High Purity exhibit low flammability, ensuring enhanced safety. Compatible with standard thermoplastic machines, it can be easily processed. For injection molding, we recommend a melt temperature range of 360°C to 380°C with a mold temperature of 160°C to 200°C, preferably 180°C. This product is supplied in 25 kg boxes with moisture-proof polyethylene liners, conveniently packaged as granules. Choose VESTAKEEP® 3300 G High Purity for its superior properties and reliability in your injection molding and extrusion applications.

VESTAMID® L2140 BK 9.7504 is a heat- and light-stabilized polyamide 12 compound designed for extrusion of tubing and semi-finished products such as fuel lines. The properties of this material are minimally affected by changing humidity due to its low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance.

VESTAMID® NRG 3001 NC is a polyamide 12 compound specifically developed for the manufacturing of hydrocarbon transport piping systems and liners. This material offers easy processing and excellent dimensional control during pipe extrusion, particularly for large diameter pipes. VESTAMID® NRG 3001 demonstrates exceptional compatibility with hydrocarbons such as crude oil, as well as oilfield chemicals like paraffin inhibitors. As a result, it delivers high dimensional stability and maintains unaffected properties for parts in contact with these substances. Experience the reliability and performance of VESTAMID® NRG 3001 in your hydrocarbon transport applications. Choose VESTAMID® NRG 3001 for its superior properties, easy processing, and excellent dimensional control, ensuring optimal performance and durability in your piping systems and liners.

VESTAMID® NRG 2901 BK is a high-viscosity, heat-stabilized compound with exceptional mold release properties. It is nucleated to reduce cycle time and shrinkage of molded parts. It is commonly used for gas pipes and fittings, with a proven record of safe and reliable performance in demanding applications, including fuel lines in passenger cars, air brake tubing in trucks, and offshore applications.

VESTAMID® L2124 NC is a plasticized, heat- and light-stabilized polyamide 12 compound specially designed for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. This compound conforms to DIN 73 378, Type: PA 12-PHL, for tubing. VESTAMID® L2124 NC is characterized by its high melt viscosity and excellent dimensional control during pipe extrusion. Compounds based on PA12 demonstrate minimal variation in properties with changing humidity due to their low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Choose VESTAMID® L2124 NC for its reliable performance, versatility, and exceptional properties, ensuring the durability and reliability of your flexible tubing and hose applications.

VESTAKEEP® L 4000 G is a high-viscosity, unreinforced, lubricated polyether ether ketone suitable for injection molding and extrusion. The semicrystalline polymer offers superior thermal and chemical resistance. Parts made from VESTAKEEP® L 4000 G have low flammability and can be processed using standard machines for thermoplastics.

VESTAKEEP® 4000 FP is an unreinforced, high-viscosity polyether ether ketone fine powder. It can be used as a basic resin or blended with different additives for manufacturing compression molding parts. This semi-crystalline polymer exhibits excellent thermal and chemical resistance. VESTAKEEP® 4000 FP has low flammability.

INFINAM® PA 6005 P is a fine powder with a natural color designed for use in additive fabrication. This product is versatile and can be used for creating functional prototypes, individual units, and serial parts. It is particularly well-suited for powder bed fusion technologies.

VESTAKEEP® 4000 P is an unreinforced, high-viscosity polyether ether ketone powder. It can be used for manufacturing compounds or as a scatter powder for composites. The semicrystalline polymer offers superior thermal and chemical resistance. VESTAKEEP® 4000 P has low flammability.

TROGAMID® myCX eCO is a microcrystalline transparent polyamide used for manufacturing parts in the optical industry, such as lenses, using the injection molding process. It is produced using production technology that maximizes the potential for CO2 emission savings of up to 50%.

VESTAMID® L2124 BK 9.7507 is a plasticized polyamide 12 compound specially formulated for the extrusion of flexible tubing and hoses in oil and petrochemical applications. This heat- and light-stabilized compound complies with DIN 73-378, Type: PA 12-PHL, for tubing. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured with exceptional impact strength, a low coefficient of friction, and good chemical resistance, parts made from VESTAMID® L2124 BK 9.7507 exhibit outstanding performance. With its high melt viscosity and precise dimensional control during pipe extrusion, this semi-crystalline material provides reliability and ease of processing. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® L2124 BK 9.7507 is ready for seamless integration into your production process.

VESTAMID® NRG 5901 BK is a high-molecular-weight PA-12 material developed by Evonik. This exceptional material offers superior performance characteristics, making it an ideal choice for expanding the use of thermoplastic piping systems. With its ability to handle higher operating pressures and larger diameters, VESTAMID® NRG 5901 BK provides a safe and cost-effective alternative to metallic piping systems. In addition to extending the operating pressure limits of thermoplastic piping systems, it offers numerous benefits and, in many cases, outperforms conventional PE piping systems. Experience the reliability, durability, and enhanced performance of VESTAMID® NRG 5901 BK in your piping applications. Choose VESTAMID® NRG 5901 BK for its superior properties and cost-effective solution, ensuring the safe and efficient operation of your thermoplastic piping systems.

VESTAMID® X7393 BK 9.7507 is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 BK 9.7507 exhibit optimized cold temperature impact resistance, increased burst pressure resistance, a low coefficient of friction, and good chemical resistance.

VESTAMID® eCO LX9039 BBM100 is a unique polyamide 12 product offered by Evonik. It is an unmodified polyamide 12 with medium viscosity and does not contain any stabilizers or processing aids. This specific formulation is typically utilized in special circumstances where the absence of additives is desired or the presence of processing aids could cause interference. The "eCO" in its name reflects Evonik's commitment to reducing CO2 emissions by utilizing renewable or circular feedstocks through a mass-balance approach. VESTAMID® eCO LX9039 BBM100 provides a reliable solution for applications requiring a pure polyamide 12 material without any additional additives, catering to specific requirements in various industries.

VESTAMID® L2123 BK 9.7507 is a plasticized and high-viscosity polyamide 12 compound designed for the extrusion of flexible tubing and hoses, particularly in the automotive industry. This compound complies with DIN 73 378, Type: PA 12-PHL, for tubing. Thanks to its low moisture absorption, compounds based on PA 12 demonstrate minimal variation in properties with changing humidity. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. VESTAMID® L2123 BK 9.7507 features a high melt viscosity, optimized cold temperature impact resistance, and precise dimensional control during pipe extrusion. Supplied as cylindrical granules in moisture-proof bags, they are ready for seamless processing. Choose VESTAMID® L2123 BK 9.7507 for its reliability, high-viscosity performance, and excellent properties in your flexible tubing and hose extrusion applications.