Products

VESTAMID® eCO LX9039 BBM100 is a unique polyamide 12 product offered by Evonik. It is an unmodified polyamide 12 with medium viscosity and does not contain any stabilizers or processing aids. This specific formulation is typically utilized in special circumstances where the absence of additives is desired or the presence of processing aids could cause interference. The "eCO" in its name reflects Evonik's commitment to reducing CO2 emissions by utilizing renewable or circular feedstocks through a mass-balance approach. VESTAMID® eCO LX9039 BBM100 provides a reliable solution for applications requiring a pure polyamide 12 material without any additional additives, catering to specific requirements in various industries.

Dynasylan® HYDROSIL 2926 is a versatile organosilane solution designed to enhance various applications. This water-based product acts as a surface modifier, crosslinking agent, and adhesion promoter. It effectively works with polymers like Polyethylenes (PE), Polypropylenes (PP), Epoxies (EP), and more. Meeting regulatory standards such as REACH Exempt, this liquid solution is available in cans and drums. Trust in its high performance and compatibility for improved results.

VESTAMID® L1833 BK 9.7623 is a 23% glass fiber-reinforced, easily demoldable, and heat-stabilized polyamide 12 compound. This compound is specifically formulated to provide efficient production of injection molded parts with short cycle times, thanks to its excellent mold release properties. VESTAMID® L1833 BK 9.7623 is supplied as cylindrical granules, conveniently packaged in moisture-proof bags, ensuring optimal storage conditions. Experience the reliability and performance of VESTAMID® L1833 BK 9.7623 in your injection molding applications. This compound, with its glass fiber reinforcement, offers enhanced strength and rigidity, while its demolding characteristics and heat stability contribute to efficient production. Choose VESTAMID® L1833 BK 9.7623 for its exceptional properties, ease of processing, and suitability for a wide range of injection molded parts.

VESTAMID® L2140 BK 9.7504 is a heat- and light-stabilized polyamide 12 compound designed for extrusion of tubing and semi-finished products such as fuel lines. The properties of this material are minimally affected by changing humidity due to its low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance.

VESTAKEEP® 4000 FP is an unreinforced, high-viscosity polyether ether ketone fine powder. It can be used as a basic resin or blended with different additives for manufacturing compression molding parts. This semi-crystalline polymer exhibits excellent thermal and chemical resistance. VESTAKEEP® 4000 FP has low flammability.

Dynasylan® HYDROSIL 2776 is an advanced organosilane that transforms surfaces. As a versatile surface modifier and crosslinking agent, it excels in various applications. With its VOC-free composition, it enhances adhesion and coupling. This product is a game-changer for building materials, electrical components, and elastomers. Experience improved processability and exceptional performance in cables, laminates, and pipes with Dynasylan® HYDROSIL 2776.

Dynasylan® 6498 is a concentrate of vinyl silane (oligomeric siloxane) containing vinyl and ethoxy groups. This low-viscosity liquid, nearly odorless and colorless, serves as a superb compatibilizer between inorganic fillers (such as kaolin, MDH, ATH) and organic polymers (including EPDM, EVA, PE).

VESTAKEEP® 4000 GF30 is a glass fiber-reinforced (30%) polyether ether ketone specifically designed for injection molding applications. This semi-crystalline polymer offers superior mechanical, thermal, and chemical resistance, ensuring exceptional performance. Parts manufactured from VESTAKEEP® 4000 GF30 exhibit low flammability, enhancing safety. Compatible with common injection molding machines for thermoplastics, this material simplifies the manufacturing process. Experience the reliability and versatility of VESTAKEEP® 4000 GF30 in your injection molding applications. With its glass fiber reinforcement, it provides enhanced strength and rigidity, while maintaining excellent properties in challenging environments. Choose VESTAKEEP® 4000 GF30 for its superior mechanical performance, thermal stability, chemical resistance, and ease of processing, enabling the production of high-quality injection molded parts.

Dynasylan® 1189 is a bifunctional silane, boasts a reactive secondary amine and hydrolyzable methoxysilyl groups. Its dual reactivity enables chemical binding to both inorganic materials (such as glass, metals, fillers) and organic polymers (like thermosets, thermoplastics, elastomers). Serving as an adhesion promoter, surface modifier, and catalyst for substance modification, Dynasylan® 1189 contributes to versatile applications.

VESTAKEEP® 2000 G is a medium viscosity, unreinforced polyether ether ketone designed for injection molding applications. This semi-crystalline polymer offers superior thermal and chemical resistance, ensuring high-performance results. Parts manufactured from VESTAKEEP® 2000 G exhibit low flammability, enhancing safety. The material is compatible with common injection molding machines for thermoplastics, simplifying the manufacturing process. For optimal results, we recommend a melt temperature range of 360°C to 380°C during the injection molding process, with a mold temperature within 160°C to 200°C, preferably at 180°C. VESTAKEEP® 2000 G is supplied as granules in 25 kg boxes with moisture-proof polyethylene inliners, ensuring convenient storage and handling. Choose VESTAKEEP® 2000 G for its reliability, ease of processing, and exceptional properties, enabling the production of high-quality injection molded parts.

VESTAKEEP® 3300 G High Purity is an unreinforced polyether ether ketone specifically designed for injection molding and extrusion. Refined using Evonik's advanced filtration technology, this medium-viscosity polymer offers exceptional thermal and chemical resistance. Parts manufactured with VESTAKEEP® 3300 G High Purity exhibit low flammability, ensuring enhanced safety. Compatible with standard thermoplastic machines, it can be easily processed. For injection molding, we recommend a melt temperature range of 360°C to 380°C with a mold temperature of 160°C to 200°C, preferably 180°C. This product is supplied in 25 kg boxes with moisture-proof polyethylene liners, conveniently packaged as granules. Choose VESTAKEEP® 3300 G High Purity for its superior properties and reliability in your injection molding and extrusion applications.

Dynasylan® SIVO 214 is an aminofunctional silane composition with enhanced crosslinking activity. It serves as an adhesion promoter, facilitating bonding between inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). Additionally, it functions as a surface modifier and supports chemical modification of various substances.

VESTODUR® 3030 is a high-viscosity polybutylene terephthalate (PBT) resin that is specially formulated for extrusion applications. It provides outstanding resistance to hydrolysis and heat. This compound is particularly suitable for the production of rigid, small-diameter tubing, including loose fiber optic buffer tubes. It is also compatible with film extrusion processes.

Dynasylan® HYDROSIL 1151 is the ultimate adhesion promoter and surface modifier. Tailored for enhancing bonding between glass and metal, this silane is a game-changer for various applications. Whether in primers, foundry resins, or abrasives, it delivers. With benefits like improved strength, corrosion resistance, and high performance, Dynasylan® HYDROSIL 1151 takes your materials to the next level.

VESTAKEEP® L 4000 G is a high-viscosity, unreinforced, lubricated polyether ether ketone suitable for injection molding and extrusion. The semicrystalline polymer offers superior thermal and chemical resistance. Parts made from VESTAKEEP® L 4000 G have low flammability and can be processed using standard machines for thermoplastics.

Dynasylan® GLYEO is a bifunctional organosilane, features a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. Its dual reactivity facilitates chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (e.g., thermosets, thermoplastics, elastomers). Serving as an adhesion promoter, crosslinking agent, and surface modifier, Dynasylan® GLYEO is a colorless, low-viscosity liquid with a subtle terpentine-like odor. It readily dissolves in alcohols, ketones, and aliphatic and aromatic hydrocarbons.

Dynasylan® VTEO is a bifunctional organosilane, boasts a reactive vinyl group and a hydrolyzable inorganic triethoxysilyl group. With its dual reactivity, Dynasylan® VTEO forms chemical bonds with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). This compound serves as a crosslinking agent, adhesion promoter, and surface modifier, providing versatile applications.

VESTAMID® L2124 NC is a plasticized, heat- and light-stabilized polyamide 12 compound specially designed for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. This compound conforms to DIN 73 378, Type: PA 12-PHL, for tubing. VESTAMID® L2124 NC is characterized by its high melt viscosity and excellent dimensional control during pipe extrusion. Compounds based on PA12 demonstrate minimal variation in properties with changing humidity due to their low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Choose VESTAMID® L2124 NC for its reliable performance, versatility, and exceptional properties, ensuring the durability and reliability of your flexible tubing and hose applications.

VISIOMER® TRGDMA (triethylene glycol dimethacrylate) is a dimethacrylate monomer with low viscosity, making it well-suited for use as a crosslinking agent in free radical polymerization. Additionally, it serves as an adhesion promoter and hardener for PVC plastisols, as well as a component in reactive resins. This versatile compound finds applications in a wide range of industries, including 3D printing, adhesives and sealants, coatings, construction, personal care, and healthcare, as well as plastics and rubber.

Dynasylan® AMMO is a bifunctional organosilane, presents a reactive primary amine and hydrolyzable inorganic methoxysilyl groups. Its dual reactivity enables chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (e.g., thermosets, thermoplastics, elastomers). Functioning as an adhesion promoter and surface modifier, Dynasylan® AMMO is a clear, colorless liquid with an amine-like odor. It shows solubility in alcohols and aliphatic and aromatic hydrocarbons.

Dynasylan® VTMO is a bifunctional organosilane, combines a reactive vinyl group and a hydrolyzable inorganic trimethoxysilyl group. Its versatile reactivity enables chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). Functioning as a crosslinking agent, adhesion promoter, and surface modifier, Dynasylan® VTMO offers diverse applications.

VISIOMER® TMPTMA (trimethylol propane trimethacrylate) is a trifunctional methacrylate monomer renowned for its ability to serve as a crosslinking agent. It imparts cohesive strength and high temperature resistance to polymers and elastomers by forming dense networks. This versatile monomer finds applications in industries such as 3D printing, adhesives and sealants, coatings, construction, as well as plastics and rubber.

VESTAMID® LX9001 BK 9.7504 is a heat-stabilized and light-resistant PA 12 compound specifically developed for the extrusion coating of steel tubes. This compound enhances the corrosion resistance of steel tubes through its exceptional impact strength, abrasion resistance, and chemical resistance. The excellent adhesion between the steel and the properly applied VESTAMID® LX9001 BK 9.7504 further contributes to this increased corrosion resistance. Additionally, VESTAMID® LX9001 BK 9.7504 offers the advantages of low water absorption, good dimensional stability, and consistent properties even in changing ambient humidity. Supplied as cylindrical pellets in moisture-proof packaging, they are ready for seamless processing. Experience the exceptional qualities of VESTAMID® LX9001 BK 9.7504 and enhance the performance and durability of steel tubes with its reliable coating solution.

AEROXIDE® Alu C is a fine-particulate, pure aluminum oxide (Al₂O₃) with high specific surface area and marked aggregate and agglomerate structure. Because of it high purity and low water content, the product can be used well as an additive to anorganic materials, for heat insulation, and also as a catalyst substrate. The positive surface charge can be used to control the electrostatic charge.

Dynasylan® GLYMO is a bifunctional organosilane, featuring a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. This dual reactivity empowers Dynasylan® GLYMO to chemically bond with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). It functions as an adhesion promoter, crosslinking agent, and surface modifier.

VESTAKEEP® 4000 P is an unreinforced, high-viscosity polyether ether ketone powder. It can be used for manufacturing compounds or as a scatter powder for composites. The semicrystalline polymer offers superior thermal and chemical resistance. VESTAKEEP® 4000 P has low flammability.

VESTAMID® LX9008 BK 9.7504 is a plasticizer-free polyamide 12 compound renowned for its exceptional long-term resistance under thermal load. This compound is specifically designed for the production of flexible tubes exposed to higher temperatures, making it ideal for applications in the engine compartment of motor vehicles. When utilized as diesel fuel lines, VESTAMID® LX9008 BK 9.7504 demonstrates significant advantages over standard grades, as evident in storage tests with diesel fuel. With low moisture absorption, this material maintains the dimensions and properties of finished parts even in changing ambient conditions. However, when using VESTAMID® LX9008 BK 9.7504 for fuel lines, certain prerequisites must be considered. Experience the outstanding long-term thermal resistance and reliability of VESTAMID® LX9008 BK 9.7504 for your demanding applications.

TROGAMID® myCX eCO is a microcrystalline transparent polyamide used for manufacturing parts in the optical industry, such as lenses, using the injection molding process. It is produced using production technology that maximizes the potential for CO2 emission savings of up to 50%.

Dynasylan® 6490 is a concentrate of vinyl silane (oligomeric siloxane) containing both vinyl and methoxy groups. This nearly odorless, colorless, low-viscosity liquid acts as an excellent compatibilizer between inorganic fillers (such as kaolin, MDH, ATH) and organic polymers (including EPDM, EVA, PE).

VESTAMID® L1930 BK 9.7503 is a heat-stabilized PA 12 compound reinforced with 30% milled glass fibers. It is suitable for injection molding applications. The reinforcement provides high strength and rigidity to the moldings. Due to the low water absorption of PA 12, parts made from this compound exhibit good dimensional stability and maintain mechanical properties even with changing ambient humidity.

VESTAMID® L1670 is a low-viscosity polyamide 12 compound that has been specifically developed with heat and light stabilization for the extrusion of thin wire insulations and cable jacketings. Coatings made from VESTAMID® L1670 demonstrate a low coefficient of friction, which greatly facilitates the process of laying cables. This compound is well-suited for profile extrusion and wire and cable extrusion processing techniques.

Dynasylan® DAMO-T is a bifunctional organosilane, equipped with two reactive amino groups and hydrolyzable inorganic methoxysilyl groups. With this dual reactivity, Dynasylan® DAMO-T can establish chemical bonds with both inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). This makes it an effective adhesion promoter and surface modifier.

Dynasylan® A is also known as TEOS (tetraethoxysilane), is the ethyl ester of orthosilicic acid. This colorless, low-viscosity liquid boasts a SiO content of 28.5%. Utilization involves acid- or alkali-catalyzed hydrolysis, leveraging all four ethoxy groups for reaction and earning it tetrafunctional status. Hydrolysis initiates silanol group formation, which further condenses to establish robust siloxane bonds (-Si-O-Si-). Notably, condensation begins before hydrolysis concludes, with ongoing condensation during storage resulting in gel formation. Gelation rate hinges on water concentration.

VESTAKEEP® 4000 CF30 is a polyether ether ketone (PEEK) reinforced with 30% carbon fiber. It is specifically designed for injection molding. This semi-crystalline polymer offers superior mechanical, thermal, and chemical resistance. Parts made from VESTAKEEP® 4000 CF30 have low flammability. It can be processed using standard injection molding machines for thermoplastics.

Dynasylan® DAMO is a versatile diamino-functional silane that enhances adhesion and modifies surfaces. Acting as an adhesion promoter and surface modifier, it bridges the gap between inorganic materials and organic polymers like polyamides, PBT, PVC, and more. This silane boasts features like corrosion resistance, good impact strength, and improved mechanical properties. It's your solution for cables, pipes, and beyond. Elevate your materials with Dynasylan® DAMO.

Dynasylan® 6598 is an oligomeric siloxane featuring vinyl, propyl, and ethoxy groups. Developed from Dynasylan® VTMOEO, this colorless and nearly odorless liquid brings enhanced properties. Acting as an excellent silane compatibilizer, it bridges inorganic fillers like kaolin, MDH, and ATH with organic polymers such as EPDM, EVA, and PE. In mineral-filled and peroxide-crosslinked cable systems, Dynasylan® 6598 improves mechanical and electrical attributes, especially in moist conditions. With its high boiling start and flash point, it ensures safety, handling ease, and processing advantages. Furthermore, this product emits significantly less hydrolysis ethanol (VOC) compared to monomeric silanes, addressing environmental considerations.