Products

100 Flex Epoxy Mortar is used for setting most types of ceramic floor tile, porcelain tile, quarry tile, and resistant floor bricks and pavers where chemical resistance and high strength and impact resistance is required. For setting green marble, agglomerates, or other natural stones that are susceptible to warping and distortion when set with conventional Portland cement mortars

51 Premium Floor and Wall is a premium floor and wall thin-set mortar providing superior bond strength. Premium quality blend of Portland cement, mineral fillers and special additives provides sag resistance, ease of application, long open time and adjustability.

1600 Ultra Performance Grout is a premium polymer modified, presealed color-consistent grout. Its unique fast-setting formulation ensures color uniformity without efflorescence, is suitable for grouting both Wall and Floor tiles, and develops superior flexural and compressive strengths exceeding ANSI A118.7 requirements. Pre-sealed for reduced permeability, increased stain resistance as well as resistance to mold and mildew. 1600 UPG is formulated to be VOC-free.

60 Polymer-Modified Thin-Set Mortar is a one-component, polymer-modified thin-set mortar. Polymer modification provides the excellent bonding and flexibility characteristics required for installation of tile and stone over most surfaces.

56SR Premium Sag-Resistant Mortar is a premium-grade, sag resistant Large Heavy Tile (LHT) mortar, designed specifically for both thin or medium-bed wall, fl oor installation of large format tile and stone. 56SR Premium Sag-Resistant Mortar provides excellent sag resistance and mortar transfer to backs of larger format tile & stone on vertical applications, as well as superior tile support and mortar transfer on horizontal applications. A premium polymer modified dry set mortar consisting of high-performance polymers and water retention additives, carefully graded sands, Portland cement, and special additives, which contribute to the unique characteristics of 56SR Premium Sag-Resistant Mortar. Available in Gray & White.

500 P.M. Unsanded Grout is modified unsanded grout is a premium Portland cement based grout containing finely ground aggregates, colorfast pigments, and select polymer additives to provide superior flexural and compressive strengths. It cures to provide a dense, hard, wear-resistant joint, containing FlexfreshTM for mold and mildew resistance.

600 P.M. Sanded Grout is a premium smooth spreading cement-based grout containing graded aggregates, colorfast pigments, and select polymer additives to provide superior flexural and compressive strengths. It cures to provide a dense, hard, wear resistant joint, containing FlexfreshTM for mold and mildew resistance

51/44 System – Premium, Flexible Latex Tile Mortar is a high-performance, latex Portland cement mortar: 51/44 System – Premium, Flexible Latex Tile Mortar is a High Solids Thin-Set Mortar Additive for use with Flextile 51 Premium Floor & Wall Thin-Set Mortar in installing most ceramic tile and stone on properly prepared interior or exterior surfaces. The high latex solids content of Flextile 44 High Solids Thin-Set Mortar Additive increases safety margins on exterior applications where thermal expansion / contraction of tiles is a concern, where extreme freeze / thaw conditions exist, in water immersion applications and in other critical or extra-heavy service situations.

52 Premium-Grade Polymer-Modified Mortar is a premium-grade, superior high-performance, one component, polymer-modified thin-set mortar. Unique, high polymer modification provides the superior bonding characteristics and exceptional flexibility required for installation of tile and stone over difficult to bond surfaces such as exterior grade plywood, vinyl and laminates

5100 Porcelain Bond Mortar is used for interior installation of porcelain tile, marble, slate, and all types of ceramic tile on vertical or horizontal surfaces of concrete, concrete block, masonry, brick and, in dry interior areas only, gypsum wallboard. For exterior installations or for installation of tile over exterior grade plywood surfaces (dry interior areas only), mix with Flextile 43 Thin-Set Mortar Additive or Flextile 44 High Solids Thin-Set Mortar Additive.

55LHT Large Heavy Tile Mortar is a Polymer Modified Large Heavy Tile (LHT) Mortar, designed specifically for both thin or medium-bed wall, floor installation of large format tile and stone. 55LHT Large Heavy Tile Mortar provides excellent sag resistance and mortar transfer to backs of larger format tile & stone on vertical applications, as well as superior tile support and mortar transfer on horizontal applications. A formula which includes high-performance polymers and water retention additives, carefully graded sands, Portland cement, and special non-sag additives contributes to the unique characteristics of 55LHT Large Heavy Tile Mortar. Available in Gray & White.

5400 MaxiFlex Superior-Grade Polymer-Modified Mortar is a superior-grade, high-performance, one component, polymer-modified thin-set mortar. Unique, high polymer modification provides the superior bonding characteristics and exceptional flexibility required for installation of tile and stone over difficult to bond surfaces such as exterior grade plywood, vinyl and laminates, and is suitable for use with submerged applications and freeze/thaw conditions (see "Limitations" section).

53 Floor Mix Mortar is a dry-set mortar providing good bond strength with minimal shrinkage. Select quality blend of Portland cement, mineral fillers and special additives providing ease of application, good open time and adjustability.

50 Professional-Grade Mortar is a professional-grade, high-performance, one-component, polymermodified thin-set mortar. Unique, high polymer modification provides the superior bonding characteristics and improved flexibility for installation of tile and stone over most surfaces.