Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Usage
A contact adhesive for bonding rubber, neoprene, leather and other materials to themselves or to concrete, wood, steel or other metals.
- Application
Surfaces must be cleaned and dry, free from all oil, grease and corrosion products. Refer to primer recommendations for Gaco Western elastomers.
Stir adhesive thoroughly before using. Apply one or two coats of GacoFlex N-1207 to both surfaces by brush. Apply sufficient N-1207 to assure uniform coverage over the entire area, between 150 to 200 square feet per gallon per coat.
Allow adhesive to dry to touch. Normally a drying time of 1 to 1½ hours is sufficient. It should be noted that it is important to allow complete drying of the N-1207 adhesive. Poor adhesion can result from mating the two surfaces before N-1207 is sufficiently dry; whereas, even after drying overnight, the N-1207 can be reactivated by a light solvent wiping with Gaco thinner.
GacoFlex N-1207 provides a good, firm bond upon contact and care should be exercised to align surfaces properly. After contact, press surfaces together using manual or mechanical means of applying pressure.
An instantaneous bond is achieved which increases in strength for several weeks as the adhesive cures. The initial bond is strong enough for immediate service in most instances.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Coverage | 286.0 | sq.ft./gal./Mil | — |
| Solids (By Weight) | 16.5 - 17.5 | % | Method 4041 (Fed. Std. 141) |
| Solids (By Volume) | 17.3 - 18.3 | % | Method 4041 (Fed. Std. 141) |
| VOC | 249.0 | g/l | — |
| Weight | 10.1 - 11.1 | lbs/gal | — |
| Flash Point | 45.0 | °F | ASTM D-56 (TCC) |
Regulatory & Compliance
- Certification
Product certified for Low chemical emissions UlCOM/GC Ul 2818.
Storage & Handling
- Storage Stability
12 Months