Knowde Enhanced TDS
Identification & Functionality
- INCI Name
- Cosmetic Ingredients Functions
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
- Benefit Claims
Applications & Uses
- Markets
- Bath & Shower Applications
- Sun Care Applications
- Product Applications
- GalSORB OMC (HP) is a very well-known, effective sunscreen, widely used in sunscreen products and other skin care formulations which offer sun protection, e.g. creams, lotions, gels, colour cosmetics and others.
- GalSORB OMC (HP) is suitable for hair care products also. It is also used as sun protection ingredient in bathing bars, body-wash, shower-gels, etc.
- Being insoluble in water, GalSORB OMC (HP) is an ideal sunscreen for water-resistant / water-proof sun-protection formulations
Properties
- Physical Form
- Solubility
- Appearance
- Clear syrupy oily liquid, pale yellow
- Odor
- Characteristic
- Soluble in
- Ethanol, IPA
- Specifications
| Value | Units | Test Method / Conditions | |
| Color | max. 30 | APHA | — |
| Acid Value | max. 0.5 | — | — |
| Specific Gravity (at 25°C) | 1.005 - 1.013 | — | — |
| Refractive Index (at 20°C) | 1.542 - 1.548 | — | — |
| Purity | min. 99.1 | % by mass | Gas Chromatography |
| Free EHA | max. 30 | ppm | — |
| UV Absorbance (E_{1cm}^{1%} at 310 ± 2 nm) | 835 - 865 | — | — |
| Saponification Value | 180 - 200 | mg KOH/g | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Identification test
Infra - red fingerprint should match with that of standard.
Safety & Health
- Safety Information
Spill should be contained / collected and disposed off as per the regulations. Avoid ingestion, contact with eyes, skin and clothing. In case of contact with eyes and skin, seek adequate and timely medical attention.
Packaging & Availability
- Packaging Type
- Packaging Information
GalSORB OMC (HP) is available in 235 litres HMHDPE carboys. Total of 80 carboys i.e. 18.8 MT can be shipped palletized or non-palletized in 20 ft. full container load. It is available in 200 litres HMHDPE carboys. Total of 80 carboys i.e. 16 MT can be shipped palletized or non - palletized in 20 ft. full container load. It is also available in 30 litres HMHDPE carboys. Total of 600 carboys i.e. 18 MT can be shipped palletized or non - palletized in 20 ft. full container load. It is available in 25 litres HMHDPE carboys. Total of 640 carboys i.e. 16 MT can be shipped palletized or non-palletized in 20 ft. full container load. It can also be supplied in IBC of 1 MT capacity. Total of 18 IBC i.e. 18 MT can be shipped in 20 ft. full container load. It can also be supplied in ISO tanks.
Storage & Handling
- Shelf Life
- 2.5 Years
- Storage & Handling Information
- Store the material in a clean, dry place at 20 - 35°C away from direct heat and sunlight.
- In original sealed condition, when stored as suggested, the shelf life of the product is at least 2.5 years.
- Colour of the product may deteriorate on exposure to sunlight.
- Keep the container tightly closed after use.
- Product may solidify, if stored at < - 10°C.
- If solidifies, it is recommended to heat the ISO tank with hot water (55 - 60°C) jacket or low pressure steam (< 2 kgs / cm2 ) to bring the temperature 30 - 40°C.
- If the product becomes frozen in IBC / HMHDPE carboys, then keep the same in hot room of 30 - 40°C (avoid direct heating).
- During storage, stacking should be maximum 1+1 for IBC and carboys (palletized / non - palletized).