Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Processing Method
- Extrusion Molding
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Flammability
- Processing Information (Sheet Extrusion)
- Impact Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 2100 | MPa | ASTM D790 |
Tensile Elongation (at Break) | 31.6 | % | ASTM D638 |
Tensile Elongation (at Yield) | 3.1 | % | ASTM D638 |
Tensile Modulus | 2030 | MPa | ASTM D638 |
Tensile Stress (at Break) | 28 | MPa | ASTM D638 |
Tensile Stress (at Yield) | 39 | MPa | ASTM D638 |
Flexural Strength | 63 | Mpa | ASTM D790 |
Value | Units | Test Method / Conditions | |
Density | 1.03 | g/cm³ | ASTM D792 |
Melt Mass Flow Rate | 4 | g/10 min | ASTM D1238 |
Value | Units | Test Method / Conditions | |
Coefficient of Linear Thermal Expansion Flow (at -40 to 40°C) | 1.01E-4 | cm/cm/°C | ASTM D1525 |
Coefficient of Linear Thermal Expansion Transverse (at -40 to 40°C) | 1.04E-4 | cm/cm/°C | ASTM D1525 |
Deflection Temperature Under Load (at 0.45 MPa, Unannealed, 3.2 mm) | 93 | °C | D648 |
Deflection Temperature Under Load (at 1.8 MPa, Unannealed, 3.2 mm) | 80 | °C | ASTM D256 |
Relative Thermal Index | 60 | °C | UL 746 |
Vicat Softening Temperature | 106 | °C | ASTM D3763 |
Value | Units | Test Method / Conditions | |
Flame Rating (at 1.5mm) | HB | — | UL 94 |
Value | Units | Test Method / Conditions | |
Adapter Temperature | 205 - 250 | °C | — |
Barrel - Zone 1 Temperature | 170 - 200 | °C | — |
Barrel - Zone 2 Temperature | 180 - 220 | °C | — |
Barrel - Zone 3 Temperature | 190 - 225 | °C | — |
Barrel - Zone 4 Temperature | 200 - 250 | °C | — |
Die Temperature | 205 - 250 | °C | — |
Drying Temperature | 80 - 95 | °C | — |
Drying Time | 4 | hours | — |
Roll Stack Temperature (at Bottom) | 100 - 105 | °C | — |
Roll Stack Temperature (at Middle) | 95 - 105 | °C | — |
Roll Stack Temperature (at Top) | 90 - 95 | °C | — |
Suggested Maximum Moisture | 0.02 | % | — |
Value | Units | Test Method / Conditions | |
Dart Impact | 33 | J | ASTM D3763 |
Notched Izod Impact | 411 | J/m | ASTM D256 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability