Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Processing Method
- Injection Molding
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Flammability
- Processing Information (Injection Molding)
- Impact Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 2620 | MPa | ASTM D790 |
Tensile Elongation (at Break) | 18 | % | ASTM D638 |
Tensile Elongation (at Yield) | 2 | % | ASTM D638 |
Tensile Modulus | 2480 | MPa | ASTM D638 |
Tensile Stress (at Break) | 35 | MPa | ASTM D638 |
Tensile Stress (at Yield) | 46 | MPa | ASTM D638 |
Flexural Strength | 79 | Mpa | ASTM D790 |
Value | Units | Test Method / Conditions | |
Density | 1.04 | g/cm³ | ASTM D792 |
Melt Mass Flow Rate | 35 | g/10 min | ASTM D1238 |
Value | Units | Test Method / Conditions | |
Coefficient of Linear Thermal Expansion Flow (at -40 to 40°C) | 8.8E-5 | cm/cm/°C | ASTM D1525 |
Coefficient of Linear Thermal Expansion Transverse (at -40 to 40°C) | 8.55E-5 | cm/cm/°C | ASTM D1525 |
Deflection Temperature Under Load (at 0.45 MPa, Unannealed, 3.2 mm) | 95 | °C | D648 |
Deflection Temperature Under Load (at 1.8 MPa, Unannealed, 3.2 mm) | 82 | °C | ASTM D256 |
Relative Thermal Index | 60 | °C | UL 746 |
Vicat Softening Temperature | 99 | °C | ASTM D3763 |
Value | Units | Test Method / Conditions | |
Flame Rating (at 1.5mm) | HB | — | UL 94 |
Value | Units | Test Method / Conditions | |
Back Pressure | 0.3 - 0.7 | Mpa | — |
Drying Temperature | 80 - 95 | °C | — |
Drying Time | 2 - 4 | hours | — |
Front Temperature | 205 - 225 | °C | — |
Middle Temperature | 200 - 210 | °C | — |
Mold Temperature | 50 - 70 | °C | — |
Nozzle Temperature | 205 - 245 | °C | — |
Processing Melt Temperature | 205 - 245 | °C | — |
Rear Temperature | 190 - 200 | °C | — |
Screw Speed | 30 - 60 | rpm | — |
Suggested Maximum Moisture | 0.1 | % | — |
Suggested Shot Size | 50 - 70 | % | — |
Vent Depth | 0.038 - 0.051 | mm | — |
Value | Units | Test Method / Conditions | |
Dart Impact | 21 | J | ASTM D3763 |
Notched Izod Impact | 240 | J/m | ASTM D256 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability