Products

Tarnoform® 300 GB2 there is 10% glass beads filled injection-molding grade - increased stiffness and hardness with reduced shrinkage.

Grupa Azoty S.A Tarnoform® 300 GF3 is a 15% glass fibers reinforced injection-molding grade with increased strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Grupa Azoty S.A Tarnoform® 300 GF4 is a 20% glass fibers reinforced injection-molding grade with high strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Tarnoform® 400 UV is a easy flowing grade containing special carbon black giving maximum resistance against uv light exposure degradation. Only black color.

Grade with lowered wear coefficient modified with special chalk ISO 9988-1: POM-K, M-GNR, 03-002, K5

Easy flowing grade, lowered viscosity ISO 9988-1: POM-K, M-GNR, 04-002

Grade with lowered wear and friction coefficient modified with PTFE ISO 9988-1: POM-K, M-GNS2, 03-002

Grupa Azoty S.A Tarnoform® 300 SI is an Acetal (POM) Copolymer material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnoform® 300 SI are: Flame Rated Chemical Resistant Bacteria Resistant Copolymer Fatigue Resistant Typical applications include: Engineering/Industrial Parts Automotive Plumbing/Piping/Potable Water

Grade with high impact strength ISO 9988-1: POM-K, M-GNPR, 02-001

Grade with very high impact strength ISO 9988-1: POM-K, M-GNPR, 02-001

Tarnoform® 300 HG220 by Grupa Azoty S.A is comprised of Polyacetal Copolymer. It is commonly used It is available in Granules form.

Grade with lowered wear coefficient modified with molybdenium sulphite for higher loaded elements ISO 9988-1: POM-K, M-GNS2, 03-002

Tarnoform® 300 HD1 by Grupa Azoty S.A is comprised of Polyacetal Copolymer. It is commonly used It is available in Granules form.

Tarnoform® 300 AF there is injection-molding grade, modified with addition of micron-sized PTFE fibers.

Very high impact grade, also at low temperatures, high strength along weld lines ISO 9988-1: POM-K, M-GNPR, 01-001

Extremly easy flowing grade, very low viscosity ISO 9988-1: POM-K, M-GNR, 06-002

Grupa Azoty S.A Tarnoform® 300 GF2 is a 10% glass fibers reinforced injection-molding grade with increased strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Grupa Azoty S.A Tarnoform® 300 GF5 is a 25% glass fibers reinforced injection-molding grade with high strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Tarnoform® 500 M by Grupa Azoty S.A is comprised of Polyacetal Copolymer. It is commonly used It is available in Granules form.

Very easy flowing grade, low viscosity, stabilized against UV light exposure degradation ISO 9988-1: POM-K, M-GNL, 05-002

Easy flowing grade, lowered viscosity, increased strength and heat resistance ISO 9988-1: POM-K, M-GNR, 04-002

Very easy flowing grade, low viscosity ISO 9988-1: POM-K, M-GNR, 05-002

Grade with very good electroconductive properties with special carbon black ISO 9988-1: POM-K, M-GRY, 01-001

Tarnoform® 300 GF4 TF3 is a polyacetal copolymer (pom) polymer lowered wear and friction coefficient modified with 20% glass fibers reinforced.

Grade with antistatic properties dependent on absorbed humidity ISO 9988-1: POM-K, M-GNZ, 03-002

Grupa Azoty S.A Tarnoform® 500 GF8 is a 30% glass fibers reinforced injection-molding easy flowing grade with extremly high strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Grade with lowered wear and friction coefficient modified with small amount of PTFE ISO 9988-1: POM-K, M-GNS2, 03-002

High viscosity grade ISO 9988-1: POM-K, E-GNR, 01-002

Tarnoform® 300 GF6 TF3 is a polyacetal copolymer (pom) polymer lowered wear and friction coefficient modified with 30% glass fibers reinforced.

Grupa Azoty S.A Tarnoform® 200 G2 is a tarnoform® 200 g1 - there is high viscosity grade modified with 10% addition of special additives causes improved tribological properties especially reducing wear.

High impact grade, also at low temperatures, high strength along weld lines ISO 9988-1: POM-K, M-GNPR, 02-001

Tarnoform® 200 AR is a high viscosity grade with lowered wear and friction coefficient modified with aramid fibers.

Triboligical modified grade ISO 9988-1: POM-K, M-GNS2, 02-002

Grupa Azoty S.A Tarnoform® 300 GF6 is a 30% glass fibers reinforced injection-molding grade with very high strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Grade with good electroconductive properties with special carbon black ISO 9988-1: POM-K, M-GRY, 01-002

Tarnoform® 200 AF there is high viscosity acetal copolymer resin modified with addition of micron-sized PTFE fibers.