Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
- Category
Epoxy Floor Coatings and Primers, Epoxy Primers
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Features
- Excellent adhesion to concrete surfaces.
- May be applied to damp or moist surfaces.
- For use under all our epoxy flooring systems.
- Develops early tack, yet has a long “open time” for 100% Solids Epoxy systems.
- The special tack helps prevent delamination of toppings and mortars at “bond line”.
- Excellent as a clear concrete sealer.
- V.O.C. Compliant.
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Product Uses
For priming concrete surfaces, for bonding monolithic epoxy grouts, mortars and toppings such as PC-1000, PC-1175, PC-1405, PC-1500, PC-1803, PC-1850, CF-615, etc. As primer on concrete under high performance coatings and linings, such as CM-15, PC-517, PC-555, PC-650 and others As a sealer coat for new or old concrete surfaces to prevent penetration of water and chemicals. To help eliminate “Dusting” of the concrete, spalling and deterioration. As an interface adhesive bonding agent to insure adhesion of new concrete to old concrete. Ideal for warehouse floors, loading docks, shop floors, garages, aircraft hangars, exterior walkways, sumps, tank pads, pump supports, silos, and other concrete surfaces. Can be made into a non-skid finish.
- Application
Brush, spray or roller
- Pot Life
20-30 minutes @ 75°F
- Recoat Time
@ 75°F: For 100% solids resins & 100% solids coatings: 30 min. – 1-1/2 hours. Do not let primer dry when applying 100% solids material
- Mixing Ratio
1:1 by volume
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Volume Solids | 71.3 - 76.7 | % | — |
V.O.C | -239.0 | GMS/L | — |
Coverage (Theoretical, 1.0 mil DFT) | 1187.0 | sq. ft. per gallon | — |
Recommended Coverage | 150-250 sq. ft. per gallon to yield approx. 5-8 mils DFT | — | — |
Application Temperature | 45 - 100 | °F | — |
For Solvent Coatings (PC-155 should be DRY before recoating with a solvent coating.) | 4 - 6 | hours | — |
Thinner | None | — | — |
Clean Up | SA-17 or S-74 | — | — |
Packaging & Availability
- Packaging
2 gal, 10 gal kits, 2 quart kits
Storage & Handling
- Shelf Life
12 months minimum when stored between 50°F – 90°F