Products

MCU-101 is a single component, high performing; moisture cured clear urethane coating that dries quickly to a hard abrasion resistant film. MCU-101 is used as a primer and/or a topcoat for concrete or wood surfaces. MCU-101 is ideal as a clear primer over concrete to help eliminate dusting due to concrete laitance and to help prevent spalling due to thermo shock freeze/thaw cycles. Due to its excellent impact and abrasion resistance, MCU-101 is widely used in heavy traffic areas. MCU-101 is also used as a primer under our thin film chemical resistant coating systems.

A two component, high solids, high build polyamide epoxy topcoat specially formulated to protect steel and concrete in corrosive aggressive environments. Poly-Chemcure PC-200 provides excellent resistance to a wide range of industrial chemicals while maintaining good flexibility and weathering properties. PC-200 has a high gloss tile-like finish.

PC-155 is a moisture tolerant two component modified Polyamine Cured Clear Epoxy designed as a concrete primer to be used under our epoxy grouts, mortars, toppings, high performance coatings and lining systems. The low viscosity provides deep penetration into the concrete for excellent surface adhesion. Can be topcoated with 100% solids in 30 mins. – 1 ½ hrs at 75°F.

A low viscosity, two component polyamide modified epoxy primer/sealer formulated with unique wetting agents to provide maximum penetration into concrete surfaces. PC-149 seals concrete surfaces from penetration of water and chemicals which cause concrete deterioration and spalling. Ideal for both new and old concrete surfaces for exterior or interior exposures. PC-149 is also used as a primer for epoxy and polyurethane top coats.

PC-270 is a uniquely formulated two component, polyester epoxy coating. PC-270 uses specially selected polymer resins to produce a hard, high gloss tile-like finish. PC-270 is a non-yellowing, color stable coating. PC-270 provides outstanding wash and scrubability, making it ideal as an anti-graffiti coating and to surfaces exposed to great abuse. PC-270 is recommended as a coating for masonry, wood and primed metal surfaces.