company tower banner
Gulf Coast Paint Company Logo

Gulf Coast Paint PC-555

A high solids modified cycloaliphatic cured multifunctional epoxy Novolac coating. The filler is ceramic which maximizes chemical, abrasion and thermal shock resistance. Has exceptional chemical and solvent resistance for an air cured system. Designed for use in splash and spillage of 98% Sulfuric Acid and 37% HCL. This product is used as a Finish Coat on steel, concrete and polymer materials.

Product Type: Epoxy Coating, Solventless & High Solids Coating

Features: Acid Resistant, Alkali Resistant, Chemical Resistant, Good Abrasion Resistance, Good Solvent Resistance, High Solids Content, Low VOC, Medium Gloss, Thermal Shock Resistant

Application Area: Marine Applications, Pipes, Tanks

Compatible Substrates & Surfaces: Concrete, Metal, Plastics, Steel

Application Method: Brush, Roller, Spray

    Knowde Enhanced TDS

    Identification & Functionality

    Category

    Cycloaliphatic Epoxies, Epoxy Coatings

    Features & Benefits

    Labeling Claims
    Product Features
    • Outstanding resistance to most acids, alkalis, most industrial chemicals and many solvents.
    • May be applied in cold, damp conditions. Cures down to 45°F.
    • For use on concrete, epoxy mortars and steel.
    • Excellent for secondary containment.
    • V.O.C. is less than 2 lbs/gallon when reduced for spray.
    • USDA approved.
    • Excellent abrasion resistance with ceramic filler.
    • Excellent in battery storage room areas.

    Applications & Uses

    Application Method
    Compatible Substrates & Surfaces
    Product Uses

    Recommended for structural steel, vessels, equipment, pipe racks, storage tanks, towers, truck unloading pads, bleach plants, dye rooms, battery storage areas, in chemical processing plants, pulp and paper mills, sewage and waste water treatment facilities, fertilizer plants, refineries, electric generating stations, coal handling sites, mines and marine installations. Used extensively in secondary containment areas, concrete floors, walls and other structures.

    Application

    Spray, roll or brush

    Pot Life

    1 hour @ 75°F

    Recoat Time

    @ 75°F: 8 hours minimum; 24 hours maximum

    Mixing Ratio

    4:1- 4 parts Base to 1 part Hardener

    Properties

    Color
    Typical Properties
    ValueUnitsTest Method / Conditions
    GlossSemi Gloss
    Volume Solids79.36 - 84.44%
    V.O.C.1.24 (148)lbs./gal.(GMS/L)
    Coverage (Theoretical, 1.0 mil DFT)1315.0sq. ft./mil/gallon
    Recommended Thickness ( 132-180 sq. ft./gallon)2022-07-10mils DFT
    Induction TimeNone
    Application Temperature45 - 120°F
    Dry Service Temperature280.0°F
    ThinningS-74 Reducer
    Clean UpS-74 or SA-17

    Regulatory & Compliance

    Certifications & Compliance

    Packaging & Availability

    Packaging

    1 gal kits

    Storage & Handling

    Shelf Life

    1 year