Products

A two component, high solids, high build polyamide epoxy topcoat specially formulated to protect steel and concrete in corrosive aggressive environments. Poly-Chemcure PC-200 provides excellent resistance to a wide range of industrial chemicals while maintaining good flexibility and weathering properties. PC-200 has a high gloss tile-like finish.

PC-116 is a two component, fast curing high build Polyamide Epoxy Rust Inhibitive Primer designed for use as a primer for our epoxy and polyurethane topcoats. PC-116 helps prevent edge failure and film under-cutting of steel surfaces exposed to corrosive atmos­phere and chemically aggressive environments. PC-116 can be used where an extended recoat period of up to 6 months is needed. Proper cleaning of the primer must be done after extended time without a top coat to remove any dust, dirt, grease or oil that may have contaminated the surface.

A 100% solids, two component cycloaliphatic epoxy coating. PC-590 provides very low permeability along with excellent impact and abrasion resistance. Formulated with a unique moisture insensitive polymer, PC-590 may be applied on wet surfaces or underwater without effect on cure. A special resin modification produces a low modulus, flexible film, making PC-590 ideal for painting over existing sound paint without “lifting”. Recommended for steel and concrete surfaces. In general, a universal high performance air cured chemical resistant coating. We also offer a higher viscosity cycloaliphatic epoxy coating, PC-591.

A 100% solids, two component Cycloaliphatic Epoxy Coating. PC-591 provides very low permeability along with excellent impact and abrasion resistance. Formulated with a unique moisture insensitive polymer, PC-591 may be applied on wet surfaces, or underwater without effect on cure. A special resin modification produces a low modulus, flexible film, making PC-591 ideal for painting over existing sound paint without “lifting”. Recommended for steel and concrete surfaces. PC-591 is a lower viscosity version of PC-590. PC-591 wet surface epoxy can be rolled without any solvent.

PC-110 is a two component, high build Polyamide Epoxy Rust Inhibitive Primer designed for use as a primer for our Epoxy and Polyurethane Topcoats. PC-110 helps prevent edge failure and film under-cutting of steel surfaces exposed to corrosive atmos­phere and chemically aggressive environments. PC-110 can be used where an extended recoat period of up to 6 months is needed. Proper cleaning of the primer must be done after extended time without a top coat to remove any dust, dirt, grease or oil that may have contaminated the surface.

PC-270 is a uniquely formulated two component, polyester epoxy coating. PC-270 uses specially selected polymer resins to produce a hard, high gloss tile-like finish. PC-270 is a non-yellowing, color stable coating. PC-270 provides outstanding wash and scrubability, making it ideal as an anti-graffiti coating and to surfaces exposed to great abuse. PC-270 is recommended as a coating for masonry, wood and primed metal surfaces.

A high solids modified cycloaliphatic cured multifunctional epoxy Novolac coating. The filler is ceramic which maximizes chemical, abrasion and thermal shock resistance. Has exceptional chemical and solvent resistance for an air cured system. Designed for use in splash and spillage of 98% Sulfuric Acid and 37% HCL. This product is used as a Finish Coat on steel, concrete and polymer materials.