Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
- Category
Cycloaliphatic Epoxies, Epoxy Coatings
Features & Benefits
- Ready-to-Use Product Features
- Product Features
- Self-priming on steel and on most concrete applications.
- Can be rolled with no solvent.
- Ideal for marginally prepared surface.
- Outstanding impact and abrasion.
- High film build – 20 mil DFT per coat on horizontal surfaces.
- Excellent coating for manholes.
- May be applied on wet or under water surfaces.
- Meets all EPA and other air pollution regulations
- Cures down to 35°F.
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Product Uses
A wet surface epoxy recommended for structural steel, tanks, vessels, equipment, pipe racks, etc., in chemical processing plants, pulp and paper mills, sewage and waste water treatment facilities, fertilizer plants, refineries, electric generating stations, coal handling sites, marine installations, etc. PC-591 is a lower viscosity version of our most popular wet surface epoxy, PC-590.
- Application
Spray, roll, brush
- Pot Life
40-50 minutes @75ºF
- Mixing Ratio
3:1 by volume. Mix 3 parts Base (Part A) with 1 part Hardener (Part B)
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Volume Solids | 100.0 | % | — |
| V.O.C. | 0.0 | GMS/L | — |
| Finish | Gloss | — | — |
| Recommended Film Thickness (80-200 sq. ft. per gal.) | Two coats at 8-20 dry mils | dry mils | — |
| Application Temperature | 40 - 120 | °F | — |
| Dry Service Temperature | 170.0 | °F | — |
| Induction Time | None | — | — |
Packaging & Availability
- Packaging
1 gallon and 4 gallon kits