Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Category
Epoxy Coatings
Features & Benefits
- Ready-to-Use Product Features
- Product Features
- Excellent chemical, abrasion, and impact resistance.
- High film build, often used as two coat system.
- Outstanding adhesion and “wetting out” properties.
- Very low permeability-tight sealed film.
- Low cost per dry mil.
- Easily applied with airless or conventional spray.
- Used on concrete or steel surfaces.
- Available in wide range of colors.
- Tile-like finish.
Applications & Uses
- Applications
- Application Area
- Product Uses
Recommended for structural steel, tanks, vessels, equipment, pipe racks, etc., in chemical processing plants, pulp and paper mills, sewage and waste water treatment facilities, fertilizer plants, refineries, electric generating stations, coal handling sites, marine installations. May be used as a coating on concrete floors in warehouses, tank pads, production areas, garages, and loading docks. Used as a coating on block walls and other cementitious surfaces.
- Application
Spray, brush, or roller
- Pot Life
8 hours @ 75°F
- Recoat Time
6-8 hours @ 75°F
- Mixing Ratio
4:1 by volume. Mix 4 parts Base (Part A) to 1 part Hardener (Part B)
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Gloss | High gloss | — | — |
| 1 Volume Solids | 50.05 - 60.45 | % | — |
| 1 V.O.C. | 3.40 (407) | lbs. (GMS/L) | — |
| Coverage (Theoretical, 1.0 mil DFT) | 882.0 | sq. ft. per gallon | — |
| Recommended Dry Film Thickness | 3 - 4 | dry mils | — |
| Induction Time | 30.0 | minutes | — |
| Application Temperature | 50 - 120 | °F | — |
| Dry Service Temperature | 200.0 | °F | — |
| Thinning | Up to 10% SA-65 | — | — |
| Clean Up | SA-17 or S-74 | — | — |
Packaging & Availability
- Packaging
5 gal, 1 gal Kits
Storage & Handling
- Shelf Life
Minimum 12 months