Products

T-Mulz® T9PE is a phosphate ester designed for use in alkaline formulations and hard surface cleaners. It may also be used in concentrated electrolyte solutions to improve salt tolerance. This product also functions as a hydrotrope and is capable of coupling silicates, phosphates, and carbonates into alkaline mixtures. The added benefits of this product are that it provides detergency and improved wetting power to the formulation. It finds application in agricultural tank mix additives as fertilizer-water conditioner formulations.

H-Sil® SDF 30,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

Harcros Chemicals Antifoam 100 Food Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It can be used in the manufacture of food packaging materials and as a direct food additive. This product exhibits excellent dilution stability when diluted with aliphatic, aromatic, and chlorinated solvents.

H-Sil® OE is a silicone-based odor eliminator designed for industrial and consumer applications. This product acts as an odor eliminator by neutralizing the nitrogen groups that are present in most odors. It is a concentrate that can be diluted at 5 - 10% by weight in water for most applications. No other additives are needed. Fragrances can be added to the dilution by using common surfactants and fragrance bases. 5% dilutions of H-Sil® OE were successfully compared against leading industrial and consumer products via a test panel, and it consistently outlasted the competitors. At a use level of 5 - 10%, this product was successfully tested against the following odors:

• Smoke
• Butyric acid (body odor)
• Amine odors
• Urine
• Ammonia

Harcros Chemicals Antifoam 10 Food Grade is a 10% antifoam emulsion of polydimethylsiloxane designed for defoaming aqueous systems. It is exceptionally easy to dilute and disperse. This product maintains its effectiveness at temperatures up to boiling. Although designed primarily for food applications, it can also be used in many industrial processes. For effective defoaming, concentrations ranging from 10 to 100 ppm are required.

T-Mulz® 844 M is a phosphate ester designed for use in alkaline cleaners, yarn lubricants, and wet processing. It demonstrates excellent salt tolerance, especially under alkaline conditions. This product also functions well as a hydrotrope and can couple solvent, electrolyte, and surfactant mixtures. Additional benefits of using T-Mulz® 844 M include improved wetting and detergency. This product also finds application as a primary emulsion polymerization surfactant and is well suited to acrylic latexes.

H-Sil® D4 is a volatile cyclic dimethyl silicone fluid that is clear and odorless. This low-toxicity solvent evaporates completely at room temperature and leaves no residue. It is widely used in cosmetics to provide spreading, easy rub-out, and a slick, non-greasy feel to the skin. It is a good cleaning solvent for industrial applications with degreasing properties for dry cleaning and spot treatment applications.

H Soft® AO-1416 is a 30% active myristyl/cetyl (C14/16) dimethylamine oxide in water that can build viscosity and increase foaming capabilities. It is stable in acid, base, and hypochlorite, and is compatible with anionic, cationic, and nonionic surfactants. Its exceptional quality makes it suitable for a wide range of applications and markets.

H-Sil® SDF 10,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® EM-FS-50 is a fluorosilicone-in-water emulsion that uses nonionic emulsifiers. This unique emulsion is specially formulated for hard surface polishes. The fluoro portion of the molecule adds protection from greasy and waterborne soils, and the silicone portion provides gloss and additional protection from outdoor elements. It is an excellent product for formulating spray-on and wipe-off transportation polishes and protectants.

Harcros Chemicals Antifoam 8820 Food Grade is a 20% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

H-Sil® SDF 60,000 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

H-Sil® EM-60 HG is a proprietary blend of silicone fluids and reactive organo-silicones emulsified into a high-solids emulsion. It is designed to provide premium performance as a tire and vinyl dressing. This product is easily diluted with water to form a stable dispersion for use levels ranging from 10 to 20% actives. A 20% active product gives excellent all-round performance by delivering a high-gloss, durable (several washings) coating to tires and vinyl.

Harcros Chemicals Antifoam 30 Food Grade is a 30% antifoam emulsion of polydimethylsiloxane that is water-dilutable and designed primarily for use in food processing. It is also recommended for many industrial applications, such as textile dyeing and finishing, leather finishing, latex processing, soap and detergent manufacture, and boiler water defoaming. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

T-Det® O 407 is a 70% active solution of T-Det® O 40, a nonionic surface-active agent produced by the reaction of octyl phenol with 40 moles of ethylene oxide. It is a water soluble nonionic used as a high temperature detergent and as an emulsifier stabilizer in various applications.

Harcros Chemicals Antifoam 8810 Food Grade is a 10% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

T-Mulz® 734-2 KS is the potassium salt of an organic phosphate ester that is designed for use in alkaline cleaners and concentrated electrolyte solutions. It improves salt tolerance and functions as a hydrotrope. This product serves as a coupling agent in conjunction with other surfactants to clarify formulations that might otherwise be inhomogeneous. It also has the ability to improve a formula€™s wetting ability and detergency.

H-Sil® SDF 200 cSt is a regular viscosity linear polymer that is often referred to as "polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

Harcros Chemicals Antifoam 8830 Industrial Grade is a 30% active emulsion of polydimethylsiloxane formulated to control foam in industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Petrolaid™ RDX is an innovative low pH organic salt technology that replaces traditional mineral and organic acids such as hydrochloric, citric, phosphoric, formic, sulfuric, and their blends. Petrolaid™ RDX uses an “on demand” technology that release the necessary amount of hydrogen ions (H+) to react with calcium scale and iron oxide to form water soluble ions, making Petrolaid™ RDX a preferable alternative to traditional acids with superior performance and cost advantages compared to several traditional acids. Petrolaid™ RDX is DOT non-regulated, non- fuming, non-corrosive to most metals, phosphate free, and a low contributor to BOD/COD in effluents.

T-Det® 25R2 is a 100% active, high-molecular-weight, di-functional block co-polymer. This product is considered a low-foaming surfactant. It works well as a rinse aid and serves as a lubricant and leveling aid for paper coating. This product is a low-foaming reverse block copolymer.

Harcros Chemicals Antifoam 100 Industrial Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It is primarily used in non-aqueous industrial applications where silica fillers can be tolerated.

H-Sil® SQ is a proprietary cationic polymer made from natural oils and reactive silanes. This product is an excellent repellant for water- and oil-based soils and stains. Its applications include window cleaners, hard surface protectants, wood, stone, masonry, and almost any other hard or porous surface. This product is an excellent final rinse polymer for automatic car washes. It is highly hydrophobic, repels water (it beads up), and has a glossy, slick finish. Prototype formulas are available.

T-Det® 1618 DI 302 is a low-foaming, 100% active fatty alcohol alkoxylate that is used in rinse aid, bottle wash, mechanical dishwash formulations, and pulp and paper processing. It functions as a leveling aid in paper coating and is extremely hydrophobic. This product has a low foaming profile across a wide temperature range and can also be used as a defoamer, though a dispersing agent may be required.

H Soft® AO-14 formula is a 29% active myristyl dimethylamine oxide in water that is known to build viscosity and increase foaming capabilities. Acid, base, and hypochlorite-stable, AO-14 is compatible with anionic, cationic, and nonionic surfactants. Its exceptional quality allows it to be applied in a wide range of applications and markets, such as in quality dishwashing detergents as a viscosity builder, grease remover, and rinsing agent.

H-Sil® SDF 1000 cSt is a regular viscosity linear polymer that is often referred to as "polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

T-Det® N 1.5 is an anhydrous liquid nonionic surface active agent produced by the reaction of nonylphenol with 1.5 moles of ethylene oxide. It is a pale yellow liquid and can be used in chemical processing, emulsifiers, and foam control. It is also effective as a co-emulsifier in nonionic and nonionic-anionic surfactant blends.

Harcros Chemicals Antifoam 30 Industrial Grade is a 30% antifoam emulsion of polydimethylsiloxane. It is water-dilutable and designed primarily for use in industrial products and processes. This product is not intended for use in food or drug processing. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

T-Mulz® D6PE is a phosphate ester designed for use in alkaline formulations and hard surface cleaners. It may also be used in concentrated electrolyte solutions to improve salt tolerance. This product functions as a hydrotrope and is capable of coupling silicates, phosphates, and carbonates into alkaline mixtures. The added benefits of this product are that it provides detergency and improved wetting power to the formulation.

Harcros Chemicals Antifoam 8810 Industrial Grade is a 10% active emulsion of polydimethylsiloxane formulated to control foam in industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

H-Sil® SDF 12,500 cSt is a linear polymer that is often referred to as "high-viscosity polydimethylsiloxane" or "silicone fluid." Its applications include cosmetic ingredients, lubricants for plastics, insulating fluids, household product ingredients, mold-release agents, surface active agents, and many others.

Harcros Chemicals Antifoam 8830 Food Grade is a 30% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

H Soft® AO-12 is a 30% active lauryl dimethylamine oxide that exhibits excellent wetting and detergency properties, as well as outstanding foam boosting and grease cutting qualities. It is acid and hypochlorite stable, and compatible with anionic, cationic, and nonionic surfactants. The exceptional quality of H Soft® AO-12 makes it suitable for use in a variety of markets and applications.

H-Soft® AO-10 is a highly effective 30% active decyl dimethylamine oxide that is widely used for its excellent wetting, detergency, foam boosting, and grease-cutting properties. This product is known for its acid, base, and hypochlorite stability and is compatible with a wide range of surfactants, including anionic, cationic, and nonionic varieties. With its exceptional quality, H-Soft® AO-10 is suitable for use in a wide variety of markets and applications.

H-Clean™ RDX is an innovative low pH organic salt technology that replaces traditional mineral and organic acids such as hydrochloric, citric, phosphoric, formic, sulfuric, and their blends. H-Clean™ RDX uses an “on demand” technology that release the necessary amount of hydrogen ions (H+) to react with calcium scale and iron oxide to form water soluble ions, making H-Clean™ RDX a preferable alternative to traditional acids with superior performance and cost advantages compared several traditional acids. H-Clean™ RDX is DOT non-regulated, non-fuming, non-corrosive to most metals, phosphate free, and a low contributor to BOD/COD in effluents.

H-Sil® D5 is a volatile cyclic dimethyl silicone fluid that is clear and odorless. This low-toxicity solvent evaporates completely at room temperature and leaves no residue. It is widely used in cosmetics to provide spreading, easy rub-out, and a slick, non-greasy feel to the skin. It is a good cleaning solvent for industrial applications with degreasing properties for dry cleaning and spot treatment applications.