Products

T-Det® A 1330-7 is a 70% active polymeric surfactant without APE (alkylphenol ethoxylates), made for use in emulsion polymerization systems. It can act as a standalone primary emulsifier or be used with other co-surfactants. Its special reaction profile reduces the levels of polyethylene glycols, which can cause problems in latex production and post-processing. This product can be added later in the production process of acrylic latexes to improve stability against changes in viscosity, thickening under stress, and separation during freeze-thaw cycles. This surfactant is suitable for both acrylic and styrene-acrylic latexes.

T-Det® A 1340 is a polymeric surfactant that is APE-free and designed for use in emulsion polymerization systems. It can be used alone or in combination with other co-surfactants, and it has a unique reaction profile with low levels of polyethylene glycol. This product can be post-added to acrylic latexes to provide stability against viscosity creep, shear thickening, and freeze-thaw separation. T-Det® A 1340 is useful for both acrylic and styrene-acrylic latexes and is a solid that melts at 47°C. It can be solubilized in water with mild agitation.

T-Mulz® A 136 PE is an APE-free anionic surfactant that is primarily used for acrylic, styrene/acrylic, and vinyl/acrylic latexes in emulsion polymerization. It can be used as a primary surfactant or as a post-additional surfactant to improve gloss retention. This product also provides particle size control, corrosion inhibition, and improved adhesion.

H-Sil® EM-356 is a 60% active, nonionic emulsion of 350 cSt silicone. It can be used directly or diluted with water to create a stable letdown at lower solids. It is an excellent ingredient for formulators to use in automotive tire and vinyl dressings, mold release for rubber and synthetic materials, asphalt release agent, and as a press room lubricant and anti-stat when blended with cationic surfactants.

T-Det® A 1-9 is a non-ionic surfactant designed for hard surface cleaner formulations. This product is effective in targeting higher HLB soils, and when combined with lower HLB surfactants, it creates an excellent blend for the formulation of broad-range cleaners.

T-Det® N 12 is an anhydrous, opaque liquid, nonionic surface-active agent produced by the reaction of nonylphenol with 12 moles of ethylene oxide. It is compatible with anionic surfactants and is stable in the presence of acids, bases, and salts. This product is regarded as non-hazardous.

T-Det® A 267 is a biodegradable, 7 mole ethoxylate of a linear C12-C16 alcohol with exceptional detergent properties. It can be used in diverse cleaning formulations and is a semi-solid at room temperature. It is compatible with anionic, cationic, amphoteric and other nonionic surfactants.

WWT 2580 is a structured, high molecular weight cationic polyacrylamide in emulsion form, used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. It has been successfully applied in liquid/solids separation systems, including clarification and dewatering, and is well suited for higher shear applications, such as rotary presses, screw presses and centrifuges.

Harcros Chemicals Antifoam 100 Food Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It can be used in the manufacture of food packaging materials and as a direct food additive. This product exhibits excellent dilution stability when diluted with aliphatic, aromatic, and chlorinated solvents.

WWT 1082F is a high charge, high molecular weight anionic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications, such as liquid/solids separation systems, including clarification and dewatering.

WWT 1082 is a high charge, high molecular weight anionic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications, and has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

Harcros Chemicals Antifoam 10 Food Grade is a 10% antifoam emulsion of polydimethylsiloxane designed for defoaming aqueous systems. It is exceptionally easy to dilute and disperse. This product maintains its effectiveness at temperatures up to boiling. Although designed primarily for food applications, it can also be used in many industrial processes. For effective defoaming, concentrations ranging from 10 to 100 ppm are required.

T-Det® A 91-2.5 is a clear to hazy liquid surface-active agent that is anhydrous and produced by the reaction of an alcohol with 2.5 moles of ethylene oxide. The product has a hydroxyl value and is a liquid surfactant blend based on alcohol ethoxylates and alkyl phenol ethoxylates. T-Det® A 91-2.5 is a versatile emulsifier, wetting agent, and detergent used in a variety of industrial applications, including petroleum products, textiles, and cleaning.

T-Det® CAM 15 is an ethoxylated product based on cocoamine. It is primarily used as a nonionic surfactant in both industrial and domestic formulations. It is also used as a cleaning agent, antistatic agent, dispersant, emulsifier in textile formulations, corrosion inhibitor in metals, etc.

T-Det® A 26-4.5NR is a 4.5 mole ethoxylate of a linear C12-C16 alcohol with excellent detergent properties that can be used in a wide variety of cleaning formulations. This biodegradable product can be derived from either natural or synthetic sources.

T-Det® LF 460 is a slightly more hydrophilic version of T-Det® LF 416. This product is more alkali-compatible and requires less hydrotrope to produce a single-phase formulation. It is a 100% active alkoxylated alcohol that produces negligible amounts of foam while retaining excellent wetting power. This product functions well in rinse aid formulas and finds use in mechanical dishwashing and bottle-washing applications. It is also well suited to colder environments for storage, where a low set point is required. The favorable foam profile may be improved further by the addition of small amounts of T-Det® 1618 DI 302.

T-Det® DD 11 is an anhydrous, liquid nonionic surface-active agent produced by the reaction of dodecyl phenol with 11 moles of ethylene oxide. It is compatible with anionic and cationic surfactants and is stable in the presence of acids, bases, and salts.

H-PAC® 7012S is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids, and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber-lined steel, or polyethylene.

T-Det® A 136 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 6 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® N 15 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 15 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® A 138 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 8 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic and cationic surfactants, and it is stable in the presence of acids, bases, and salts.

T-Mulz® HODE is a paraffinic oil emulsifier used in dormant oil sprays applied to orchard crops and as a component in lipophilic pesticide blends. It is OMRI-listed and can be used in organic crop production.

T-Mulz® 844 M is a phosphate ester designed for use in alkaline cleaners, yarn lubricants, and wet processing. It demonstrates excellent salt tolerance, especially under alkaline conditions. This product also functions well as a hydrotrope and can couple solvent, electrolyte, and surfactant mixtures. Additional benefits of using T-Mulz® 844 M include improved wetting and detergency. This product also finds application as a primary emulsion polymerization surfactant and is well suited to acrylic latexes.

WWT 107 is a cationic polyacrylamide in emulsion form with a medium molecular weight. This product is commonly used as a flocculant in various municipal and industrial wastewater treatment applications. WWT 107 has proven to be effective in liquid/solids separation systems, such as clarification and dewatering.

T-Det® N 7 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 7 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state. They are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® A 25-7 is a non-ionic surfactant ideal for laundry applications. For best results, it is recommended to use T-Det® A 25-7 in conjunction with T-Det® A 25-3 to formulate a broad-spectrum cleaner. The 25-series ethoxylates provide excellent emulsification properties and help prevent soil redeposition during the cleaning process.

WWT 125 is a structured, medium-molecular-weight, cationic polyacrylamide in emulsion form. It is used as a flocculant in a variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering. It is well-suited for high-shear applications such as screw presses and centrifuges.

T-Det® O 6 is an anhydrous liquid nonionic surface-active agent produced by the reaction of octyl phenol with 5.5 - 6.5 moles of ethylene oxide. It is used in all phases of detergent compounding and aqueous processing for the textile and paper industries, industrial metal cleaners, acid cleaners, floor cleaners, detergent-sanitizers and waterless hand cleaners. It is particularly useful for household and industrial controlled foam detergents and is an effective emulsifier for solvents such as xylene.

H-Sil® EM-FS-50 is a fluorosilicone-in-water emulsion that uses nonionic emulsifiers. This unique emulsion is specially formulated for hard surface polishes. The fluoro portion of the molecule adds protection from greasy and waterborne soils, and the silicone portion provides gloss and additional protection from outdoor elements. It is an excellent product for formulating spray-on and wipe-off transportation polishes and protectants.

T-Mulz® COE-APF is a specially developed APE-free emulsifier for use in concentrated agricultural crop oil formulations. When combined with suitable crop oils, this emulsifier is designed to enhance the performance of herbicides. The 40% crop oil concentrate containing T-Mulz® COE-APF as the emulsifier demonstrates superior emulsion performance and cold stability.

T-Det® CAM 12 is an ethoxylated product based on cocoamine. It is primarily used as a nonionic surfactant in various industrial and domestic formulations. Additionally, this product can be used as a cleaning agent, antistatic agent, dispersant, and emulsifier in textile formulations, a corrosion inhibitor in metals, and an emulsifier in other applications.

T-Mulz® 1227 is an alcohol-based phosphate ester designed for use as a hydrotrope that provides detergency, coupling, and improved salt tolerance in alkaline cleaners, yarn lubricants, and concentrated electrolyte solutions. This product is especially effective in removing heavier soils. It has a very fast Draves wetting time, which can enhance the wetting performance of the finished formulation.

T-Det® C 20 is a liquid nonionic surface-active agent produced by the reaction of castor oil with 20 moles of ethylene oxide. Due to its nonionic structure, it can be combined with both anionic and cationic surface-active agents. T-Det® C 20 is dispersible in water with agitation.

T-Det® SAE 5 is a superior surfactant that is designed to provide outstanding wetting and rinseability properties. Its excellent formulation and handling properties make it easy to work with in various applications. With a low odor, it is ideal for use in sensitive applications where odor control is important. It has a narrow gel range, making it an ideal choice for formulators looking for a consistent, reliable product. Whether you need a surfactant for industrial or personal care applications, T-Det® SAE 5 is an excellent choice.

T-Det® CAM 10 is an ethoxylated product based on cocoamine. It is primarily used as a nonionic surfactant in various industrial and domestic formulations. Additionally, this product is used as a cleaning agent, antistatic agent, dispersant, and emulsifier in textile formulations, a corrosion inhibitor in metals, etc.

WWT 111 is an emulsion form of a high molecular weight cationic polyacrylamide, which is commonly used as a flocculant in various municipal and industrial wastewater treatment applications. Its effectiveness has been proven in liquid/solids separation systems, including clarification and dewatering.