Products

T-Det® N 4 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 4 moles of ethylene oxide. It is used as a gasoline additive to prevent gas line freezing and carburetor. Non-ionics are stable, non-corrosive products in an anhydrous state.

Harcros Chemicals Antifoam 8830 Food Grade is a 30% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Harcros Chemicals Antifoam 10 Food Grade is a 10% antifoam emulsion of polydimethylsiloxane designed for defoaming aqueous systems. It is exceptionally easy to dilute and disperse. This product maintains its effectiveness at temperatures up to boiling. Although designed primarily for food applications, it can also be used in many industrial processes. For effective defoaming, concentrations ranging from 10 to 100 ppm are required.

Harcros Chemicals Antifoam 8820 Food Grade is a 20% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Harcros Chemicals Antifoam 100 Industrial Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It is primarily used in non-aqueous industrial applications where silica fillers can be tolerated.

Harcros Chemicals Antifoam 100 Food Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It can be used in the manufacture of food packaging materials and as a direct food additive. This product exhibits excellent dilution stability when diluted with aliphatic, aromatic, and chlorinated solvents.

T-Det® XH is a polyalkalene glycol monobutyl ether surface active agent primarily used as an emulsifier and dispersing agent in a variety of industrial applications. It can be used as a pigment, paper coating, and polymer dispersant, as well as a binder and surfactant in powdered products due to its high freeze point. Additionally, it is classified as an intermediate in the manufacturing of iodophors for germicidal cleaners.

T-Det® 1618 DI 302 is a low-foaming, 100% active fatty alcohol alkoxylate that is used in rinse aid, bottle wash, mechanical dishwash formulations, and pulp and paper processing. It functions as a leveling aid in paper coating and is extremely hydrophobic. This product has a low foaming profile across a wide temperature range and can also be used as a defoamer, though a dispersing agent may be required.

T-Det® N 1.5 is an anhydrous liquid nonionic surface active agent produced by the reaction of nonylphenol with 1.5 moles of ethylene oxide. It is a pale yellow liquid and can be used in chemical processing, emulsifiers, and foam control. It is also effective as a co-emulsifier in nonionic and nonionic-anionic surfactant blends.

T-Det® EPO 81 is an anhydrous, liquid nonionic surface-active agent produced by the reaction of ethylene oxide and propylene oxide. It is used in petroleum paper manufacture, water treatment, foam control, and agricultural chemicals. Due to its nonionic structure, T-Det® EPO 81 is compatible with anionic and cationic surfactants and is stable in the presence of acids, bases, and salts.

T-Det® N 6 is an anhydrous liquid nonionic surface active agent produced by the reaction of nonylphenol with 6 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state and are used in a variety of industries, such as agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® SAE 7 is a premium-quality surfactant that offers superior wetting and rinseability, making it a highly efficient ingredient for various personal care and cleaning applications. The excellent formulation and handling properties of T-Det® SAE 7 make it easy to incorporate into a wide range of products, ensuring consistent and reliable results. Additionally, it has a low odor, making it an ideal choice for those who are sensitive to strong scents. Its narrow gel range ensures its usage in a wide range of products without causing any unwanted thickening or thinning.

T-Det® N 20 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 20 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® N 8 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 8 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state. They are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® A 138 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 8 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic and cationic surfactants, and it is stable in the presence of acids, bases, and salts.

T-Mulz® 800 is an alcohol ethoxylate-based phosphate ester designed for use in alkaline cleaners, yarn lubricants, and concentrated electrolyte solutions. This product is compatible with anionic and nonionic surfactants. It provides improved salt tolerance, functions as a hydrotrope, and gives excellent detergency, wetting, and coupling.

T-Det® A 136 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 6 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® 17R2 is a 100% active, high-molecular-weight, di-functional block co-polymer. The external polypropylene oxide block reduces foaming and enables gel-free formulating, making it a low-foaming surfactant. This product acts as a lubricant and leveling aid for paper coating and is used in bottle cleaning, mechanical dishwashing, and rinse-aid formulations.

T-Mulz® 66H is the potassium salt of an aromatic phosphate ester. It exhibits good solubility in highly alkaline liquid formulations and functions as an efficient hydrotrope for coupling nonionic surfactants into alkaline systems while simultaneously adding detergency and wetting properties. This product is recommended for use in heavy-duty liquid detergents, all-purpose hard surface cleaners, dry cleaning fluids, agricultural formulations, and textile products.

H-Sil® OE is a silicone-based odor eliminator designed for industrial and consumer applications. This product acts as an odor eliminator by neutralizing the nitrogen groups that are present in most odors. It is a concentrate that can be diluted at 5 - 10% by weight in water for most applications. No other additives are needed. Fragrances can be added to the dilution by using common surfactants and fragrance bases. 5% dilutions of H-Sil® OE were successfully compared against leading industrial and consumer products via a test panel, and it consistently outlasted the competitors. At a use level of 5 - 10%, this product was successfully tested against the following odors:

• Smoke
• Butyric acid (body odor)
• Amine odors
• Urine
• Ammonia

T-Det® A 138-9 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 8 moles of ethylene oxide at 90% active. It has a nonionic structure, making it compatible with anionic surfactants and stable in the presence of acids, bases, and salts.

T-Mulz® 844 is a phosphate ester designed for use in alkaline cleaners, textiles in yarn lubricants, and wet processing. This product is used in concentrated electrolyte solutions to improve salt tolerance and as a hydrotrope that provides detergency, wetting, and coupling properties.

T-Det® SAE 5 is a superior surfactant that is designed to provide outstanding wetting and rinseability properties. Its excellent formulation and handling properties make it easy to work with in various applications. With a low odor, it is ideal for use in sensitive applications where odor control is important. It has a narrow gel range, making it an ideal choice for formulators looking for a consistent, reliable product. Whether you need a surfactant for industrial or personal care applications, T-Det® SAE 5 is an excellent choice.

H-Sil® EM 1060 is a 60% active, nonionic emulsion of 10,000 cSt polydimethylsiloxane. This product can be used as-is or diluted with water to form a stable emulsion letdown. It is effective as a release agent for rubber, plastic, and shell metals in foundry applications. This product has additional applications in leather care, textiles, surface lubrication, surface protection, and gloss improvement.

T-Det® N 7 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 7 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state. They are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® O 9 is an anhydrous liquid nonionic surface-active agent produced by the reaction of octyl phenol with 8.5 - 9.5 moles of ethylene oxide. It is used in all phases of detergent compounding and aqueous processing for the textile and paper industries, industrial metal cleaners, acid cleaners, floor cleaners, detergent-sanitizers and waterless hand cleaners. It is particularly useful for household and industrial controlled foam detergents and is an effective emulsifier for solvents such as xylene.

T-Mulz® 734-2 is a blended anionic surfactant designed primarily for making emulsifier systems for agricultural and industrial formulations. This product is an excellent emulsifier for a wide range of solvents. It is particularly good as a solvent emulsifier when hard water is the main problem.

T-Mulz® 844 M is a phosphate ester designed for use in alkaline cleaners, yarn lubricants, and wet processing. It demonstrates excellent salt tolerance, especially under alkaline conditions. This product also functions well as a hydrotrope and can couple solvent, electrolyte, and surfactant mixtures. Additional benefits of using T-Mulz® 844 M include improved wetting and detergency. This product also finds application as a primary emulsion polymerization surfactant and is well suited to acrylic latexes.

T-Det® A 139 is an anhydrous liquid surface-active agent produced by the reaction of tridecyl alcohol with 9 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic and cationic surfactants, and it is stable in the presence of acids, bases, and salts.

T-Det® A 1312 is a non-ionic surfactant that is produced through the reaction of iso-tridecyl alcohol with 12 moles of ethylene oxide. This product can be used in a variety of applications, including textiles, metal degreasing, and household cleaners, due to its ability to penetrate, wet, solubilize, disperse, and emulsify effectively.

T-Det® O 6 is an anhydrous liquid nonionic surface-active agent produced by the reaction of octyl phenol with 5.5 - 6.5 moles of ethylene oxide. It is used in all phases of detergent compounding and aqueous processing for the textile and paper industries, industrial metal cleaners, acid cleaners, floor cleaners, detergent-sanitizers and waterless hand cleaners. It is particularly useful for household and industrial controlled foam detergents and is an effective emulsifier for solvents such as xylene.

T-Det® A 91-8 is an anhydrous liquid surface-active agent produced by the reaction of an alcohol with 8 moles of ethylene oxide. This product is useful in many applications, such as textile processing, metal degreasing, clay soils, fire fighting, and industrial, institutional, and household cleaners. It is considered a great detergent due to its superb ability to penetrate, wet, solubilize, disperse, and emulsify.

T-Det® 0519 is a specialized blend of alcohol ethoxylates with exceptional degreasing properties. It can be used to reduce the amount of oxygenated solvents and reduce VOC levels. This product is useful in many applications, such as textile processing, metal degreasing, transportation cleaners, vehicle care, and industrial, institutional, and household cleaners. It is considered a great detergent due to its superb ability to penetrate, wet, solubilize, disperse, and emulsify.

Harcros Chemicals Antifoam 30 Industrial Grade is a 30% antifoam emulsion of polydimethylsiloxane. It is water-dilutable and designed primarily for use in industrial products and processes. This product is not intended for use in food or drug processing. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

T-Mulz® 810 is an alcohol-based phosphate ester designed for use in alkaline cleaners, yarn lubricants, and concentrated electrolyte solutions to improve salt tolerance. This product is also used as a hydrotrope that provides detergency, wetting, and coupling. It is compatible with both anionic and nonionic surfactants.

T-Det® A 1315 is a surface active agent used in various applications such as textile processing, metal degreasing, clay soils, fire fighting, industrial, institutional, and household cleaners. It is known for its ability to penetrate, wet, solubilize, disperse, and emulsify. This agent is produced by the reaction of iso-tridecyl alcohol with 15 moles of ethylene oxide.