Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Applications
- Applications
This formula has been designed to grant a wide spectrum protection either to hot-melt polymer systems or to polymer solutions. It can be used with adhesives, pressure sensitive adhesives, coatings and injection molding or extrusion polymers.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Total Solids | 99±1 | % | — |
Packaging & Availability
- Packaging Type
- Packaging and Storing
Packaging
The product is supplied in fiber drums (50 kg).
Storing
ANTIOX AHM-HT must be stored in a dry place to avoid agglomeration. Use within 24 months from production date (unopened and in the original packaging).
Storage & Handling
- Shelf Life
- 24 Months
- Handling
For HOT-MELT adhesives, the recommended dosage of ANTIOX AHM-HT is:
- thermoplastic rubbers, like SIS, SBS: 1.2-1.5% on rubber content;
- ethylene-vinylacetate polymers: 0.3-0.4% on EVA content;
- polyamides: 0.5-1.0% on PA content
For SOLVENT BASED adhesives, the recommended dosage of ANTIOX AHM-HT is: - natural rubber, SBR, chloroprene rubber, polyisoprene, butyl rubber: 0.25-0.5% on dry content.
ANTIOX AHM-HT can be added directly to the compound, together with the other ingredients, or it can be predispersed into one of them, or dissolved in case of solvent based products.
When used in a hot-melt continuos system (extrusion process), we recommend adding a liquid component (such as a liquid rosin ester, naphtenic oil, or similar), to give some tack to the surface of granules. This allows for an equal distribution of the antioxidant over the total mass (volumetric dosing).