Knowde Enhanced TDS
Features & Benefits
- Benefits
PERFORMANCE Cleans efficient ALL metals, including very sensitive ones.
The low surface tension improves cleaning of parts with complex geometry
Short rinsing time needed, despite being a high pH product.COST High cleaning power even at low concentration
Can be re-used after filtration (1 to 3 times depending on the application)
Long bath-lifeHSE Non-toxic & no CMR substances
Low environmental impact
Non flammable
Properties
- Appearance
- Yellow
- Soluble in
- Totally Soluble In Water
- Typical Properties
Value | Units | Test Method / Conditions | |
Density (20°C) | 1.07 - +/- 0.01 | g/ml | BRY-MO-028 |
pH (of Pure Product) | 12.0 +/- 0.5 | — | BRY-MO-011 |
pH at 1% | 10.5 +/- 0.5 | — | BRY-MO-011 |
Surface Tension (1%) | 34.0 | Dynes /cm2 | — |
Technical Details & Test Data
- Technical Support & Free-of-charge Testing
Inventec has a worldwide dedicated Technical Support team to help you along the different stages of our cooperation.
Depending on your request, we provide online or onsite support- to select the right product based on your specific needs
- to assist you in your product qualification process
- to guide you with the initial set up of you process at all your worldwide manufacturing facilities
- to provide fast response on technical issues which could occur at any time during mass production.
Customers are also welcome in our CLEANING CENTERS to see the process in action and to get convinced by our solutions. We cover water- and solvent based processes.
Inventec is unique in the world by developing not only cleaning materials but also soldering and coating solutions. These materials are very closely linked with each other from a process point of view. Talking to our Technical Team, who understand very well these 3 different product groups, will help you greatly to overcome technical challenges within your overall process.- Process Recommendation
The best process will depend on factors such as operating conditions, equipment, desired cleaning time and the nature of contaminants. Our team is ready to advice you.
Process ExamplePROMOCLEAN TP 1113 DI or TAP WATER HOT AIR Conc: 1 - 5 % in DI water Temp: 20-30 °C / 68-86 °F or Temp: 55-60 °C /130-140 °F US: optional VACUUM US: yes Time: 2-5 min or Time: 5-10 min DRYING SOLVENTTime: 5- 20 min CLEANING RINSING DRYING Increasing the bath-life of your process can be achieved by adding an oil separator within the cleaning equipment and to add periodically concentrated product. A PCA Kit is available to monitor the bath status by colorimetric titration. Compatibility report of the cleaner with different materials is available on request.
Safety & Health
- Health, Safety & Enivironment
PROMOCLEAN TP 1113 is a Greenway product.
- Reduced toxicity
- Reduced ecotoxicity (aquatic toxicity)
- Reduced chemical oxygen demand (COD)
Contains no Reach Substances (on Candidate list, Annex XIV & XVII) / Contains no persistent organic pollutant (EC 850/2004) / Contains no Import/Export Hazardous substances (EU 649/ 2012). It is biodegradable according to regulation 648/2004 but must be neutralized and filtered before disposal in sewer system in accordance with local regulations. Neutralization and titration methods are available upon request.
Packaging & Availability
- Packaging
Available Packaging
- 20 Kg CANISTER
- 210 Kg DRUM
Storage & Handling
- Storage and Shelf Life
- Keep products in closed original packaging and store at room temperature.
- Shelf life is minimum 18 months from production date when kept in recommended conditions.