Products

ABchimie™ 746E UV LED is a single transparent component designed to protect printed circuit boards in harsh environments. It has dual cure technology (UV/LED - humidity) for shadow crosslinking. ABchimie746E UV LED can be applied using a brush, pad printing, spray machine, and, of course, a selective coating machine, which is the best method. Because of our system's low viscosity, we can limit the thickness to around 80 microns.

Promoclean™ TP 1113 is specifically formulated for the removal of hydrocarbon- or water-based oils and greases in an aqueous immersion process. Despite having a high pH to facilitate cleaning, it does not harm sensitive metals or alloys such as titanium, aluminum, copper, or brass. It is a concentrated product that must be diluted with DI water before use.

3M™ Novec 1700 is a single component fluorinated polymer that has been diluted in 3MTM NovecTM 7100DL Engineered Fluid, a segregated hydrofluoroether solvent, to produce a low viscosity, low surface tension coating solution. It dries to an ultrathin, transparent coating with excellent hydrophobic and oleophobic properties, making it ideal for moisture and corrosion protection of printed circuit boards and electronic components. It does not require curing and is simple to apply. According to the US EPA, Novec 1700 coating is nonflammable, non-ozone depleting, low in toxicity, low in GWP, RoHS compliant, and VOC exempt.

ABchimie™ DVA BA is a non-toxic solvent blend that can be used with any acrylic-based conformal coating. Used specifically for AVR80 BA acrylic coating. Thinners are primarily used to dilute coatings for use in dip and spray coating. ABchimie™ DVA BA is a specific thinner that allows you to reduce the amount of thinner in the mix with AVR80 BA to achieve a higher thickness on the pcb when spraying with a gun (mix is 1:1).

ABchimie™ 42K UV LED is a soft one-component UV curable resin with good adhesion to a variety of substrates. It is suitable for use in high-thickness deposits (few mm). With UV LED radiations, it cures instantly. The ABchimie™ 42K UV LED provides local protection for your components, particularly against humidity and high electrical pressure. It can also be used to improve the robustness of your systems.

Promosolv™ Coat UT10 is a transparent hydrophobic and oleophobic ultrathin coating designed to protect electronics and other surfaces from moisture, corrosion, and other environmental conditions that could compromise the device's or surface's reliability. Adheres well to a wide range of substrates including plastic, glass, metal, and ceramic.

ABchimie™ AVR80 BA Conformal Coating is a non-toxic, flexible transparent acrylic coating designed to protect electronic circuitry and meet the most stringent resistance requirements. The AVR80 BA is intended to be removed using ABchimie SND or DNS (100 percent Ozone Friendly).

Promosolv™ Coat UT10-UV is a transparent hydrophobic and oleophobic ultrathin coating designed to protect electronics and other surfaces from moisture, corrosion, and other environmental conditions that could compromise the device's or surface's reliability. Adheres well to a wide range of substrates including plastic, glass, metal, and ceramic. In order to support quality control, this product is formulated with a UV tracer for easy detection under UV light.

3M™ Novec 2704 is a single component fluorinated polymer that has been diluted in 3M™ Novec™ 7200 Engineered Fluid, a segregated hydrofluoroether solvent, to produce a low viscosity, low surface tension coating solution. It dries to an ultrathin, transparent coating with excellent hydrophobic and oleophobic properties, making it ideal for moisture and corrosion protection of printed circuit boards and electronic components. It does not require curing and is simple to apply. The Novec 2704 coating is nonflammable, non-ozone depleting, low in toxicity, low in GWP, RoHS compliant, and low in VOC. The coating contains a yelloworange dye that is built into the polymer and designed to fluoresce under UV light to aid in coating inspection and quality control.

ABchimie™ 42K UV is a UV curable soft one-component resin with good adhesion to a variety of substrates. It is suitable for use in high-thickness deposits (few mm). It cures instantly with UV radiation. ABchimie™ 42K UV protects your components locally, especially against humidity and high electric pressure. It can also be used to improve the robustness of your systems.

Promoclean™ Disper 2 is specifically designed to remove hydrocarbon and water-based oils and greases. It is ideal for aqueous spray, flush, or immersed jet processes due to its excellent antifoam properties. Despite having a high pH to facilitate cleaning, it does not harm sensitive metals or alloys such as Inox, ferrous alloys, Titanium, and Copper. In any case, use caution when working with aluminum, brass, and light alloys, and always test before using. It is a concentrated product that must be diluted with DI water before use. Promoclean™ Disper 2 is qualified and used by several aerospace actors (for example, SAFRAN PR 1500B / SNECMA DMP 13300 / SNECMA DMR 70216).

ABchimie™ 746E UV is a single transparent component designed to protect printed circuit boards in harsh environments. It uses dual cure technology (UV/humidity) to crosslink in the shadows. ABchimie746E UV can be applied with a brush, pad printing, spray machine, and, of course, a selective coating machine, which is the best method. Because of our system's low viscosity, we can limit the thickness to around 80 microns.