Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Chemical Nature
Fluoropolymer
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Benefits
PERFORMANCE - Provides exceptional repellence of all kinds of liquids.
- Fast drying at room temperature ( <1 min)
COST - Substantial cost reduction due to small amount of product needed and simplicity of process.
- PCB masking is not required, saving on preparation time.
HSE - No CMR substances
- Low environmental impact & very low VOC
- Non flammable
Applications & Uses
- Markets
- Application Area
- Application Method
Properties
- Appearance
- Colourless. Clear to Slightly Cloudy, Clear. Colourless
- Soluble in
- Hydrofluoroether
- Typical Properties
- Film Properties
| Value | Units | Test Method / Conditions | |
| Solids | 2.0 | wt% | — |
| Density (20°C) | 1.4 | g/cm3 | — |
| Boiling Point (Solvent Carrier) | 61 - 76 | °C | — |
| Flash Point | None | — | — |
| Viscosity | ~1 | cSt | — |
| Surface Tension | 13.6 | mN/m, dynes/cm | — |
| Value | Units | Test Method / Conditions | |
| Surface Energy | 5 -10 | dynes/cm | — |
| Contact Angle (Water) | 120.0 | ° | ASTM D7334-08 |
| Contact Angle (Oil) | 80.0 | ° | — |
| Heat Stability (Continuous -250°C One hour) | 150.0 | °C | — |
| Solder-Through Repairability | Yes | — | — |
| Solvent and Chemical Resistance | Excellent | — | — |
| Refractive Index | ~1.35 | — | — |
| Glass Transition Temperature (Tg) | 75.0 | °C | — |
| Dielectric Strength (2500 V/25μm) | 2500.0 | V/mil | — |
| Dielectric Constant (100 KHz) | 2.25 | — | — |
| Dissipation Factor (100 KHz) | 0.016 | — | — |
| Volume Resistivity | 4.5x10¹⁵ | Ω.cm | — |
| UL Approval (In Process of Testing) | UL94 V-0 | — | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Process Recommendation
The best process will depend on factors such as operating conditions, equipment, time and the cleanliness of the parts. Our team is ready to advise you.
- Dipping process recommended / spray application possible (especially for selective deposition)
- Typical coating thickness is about 0.2 microns
- Recommended to apply on cleaned and dried surfaces
- Touch dry within less then a minute / No thermal or UV cure required
- Technical Support & Free-of-charge Testing
Inventec has a worldwide dedicated Technical Support team to help you along the different stages of our cooperation.
Depending on your request, we provide online or onsite support- to select the right product based on your specific needs
- to assist you in your product qualification process
- to guide you with the initial set up of you process at all your worldwide manufacturing facilities
- to provide fast response on technical issues which could occur at any time during mass production.
When prior cleaning is required, customers are also welcome in our CLEANING CENTERS to see the process in action and to get convinced by our solutions. We cover water- and solvent based processes.
Inventec is unique in the world by developing not only coating materials but also soldering and cleaning solutions. These materials are very closely linked with each other from a process point of view. Talking to our Technical Team, who understands very well these 3 different product groups, will help you greatly to overcome technical challenges within your overall process.
Safety & Health
- Health, Safety & Enivironment
Contains no Reach Substances (on Candidate list, Annex XIV & XVII) / Contains no persistent organic pollutant (EC 850/2004) / Contains no Import/Export Hazardous substances (EU 649/ 2012).
- No issues when used as recommended.
- non-ozone depleting
- non-flammable
- no chlorine, no bromine
- PFOS and PFOA-free
- extremely low VOC
- RoHS compliant
Packaging & Availability
- Packaging Type
- Packaging
Available Packaging:
8kg DRUM
Storage & Handling
- Storage and Shelf Life
- Keep products in closed original packaging and store at room temperature.
- Shelf life is 2 years from production date when kept in unopened and original packaging.