Products

Key #804 Acrylic Sealer is a water-based, clear acrylic emulsion formulated to create a clear, non-yellowing, protective coating. KEY #804 provides a tough, UV and abrasion resistant film that protects surfaces from moisture penetration, staining, dirt, dust, wear, and provides a surface that is easy to clean and maintain. KEY #804 is an excellent choice for interior or exterior applications. KEY #804 is designed as an effective water-based terrazzo sealer thereby replacing solvent-based acrylic sealers. KEY #804 can be used to seal concrete, decorative concrete toppings, masonry, brick, Saltillo tiles, or any cementitious substrate. While it is a clear-drying formulation, it will tend to impart a rich darkening, or “wet look” quality to many substrates, especially those of a dark or tinted nature.

Key #803 Acrylic Sealer is a clear acrylic emulsion formulated to create a clear, non-yellowing, protective coating. KEY #803 provides a tough, UV and abrasion resistant film that protects surfaces from moisture penetration, staining, dirt, dust, wear, and provides a surface that is easy to clean and maintain. KEY #803 is an excellent choice for interior applications. KEY #803 is designed as an effective terrazzo sealer thereby replacing solvent-based acrylic sealers. KEY #803 can be used to seal concrete, masonry, brick, Saltillo tiles, or any cementitious substrate. While it is a clear-drying formulation, it will tend to impart a rich darkening, or “wet look” quality to many substrates, especially those of a dark or tinted nature.

Key #540 Industrial Coating is a 100% solid epoxy coating for use as an industrial coating and chemical resistant liner for interiors of wastewater treatment tanks, structures, lift stations, pipes, manholes and secondary containment of dilute, acids and alkalis. KEY #540 protects concrete and steel from chemicals and wastewater in immersion, splash and spillage conditions. KEY #540 is specifically designed for lining manholes, large diameter sewer pipe, lift stations and other structure. When applied over prepared concrete, KEY #540 produces a seamless, monolithic liner.

KEY #815 is a polymer acrylic liquid specially formulated as a binder for KEY #815 POLYMERIC BLOCK FILLER and KEY POOL DECK SYSTEM. KEY #815 is easy to mix and apply, providing a pinhole-free filling for interior and exterior masonry surfaces. A “stiff mix” of KEY #815 POLYMERIC BLOCK FILLER can be used to patch holes and cracks. KEY #815 POLYMERIC BLOCK FILLER is suitable for use beneath all KEY RESIN WALL COATING SYSTEMS as a substitute for epoxy block filler.

Key Thin-Film Coating of KEY RESIN COMPANY formulates a variety of epoxy and polyurethane coatings specially designed to protect floors from various degrees of chemical attack and abrasion. KEY THIN-FILM SYSTEMS, typically installed at 6-15 mils thickness, provide a brighter environment with improved cleanability over concrete surfaces. Review the requirements of your facility with the product data to select the finish that best meets the needs of the application.

Key High-Build Wall Coatings is a 100% solids, pigmented epoxy/urethane coating system designed to provide high gloss, chemical resistant protection. KEY HIGHBUILD WALL SYSTEM should be used wherever a high build, corrosive resistant, protective wall coating is required. It is essentially odorless and can be used in occupied areas. KEY HIGH-BUILD WALL SYSTEM provides a smooth, high gloss finish with a light orange peel finish. KEY HIGH-BUILD WALL SYSTEM can be incorporated into seamless floor cove base systems.

Key Epoxy/Urethane Wall Coatings is a pigmented epoxy/urethane coating system designed to provide high gloss, chemical resistant protection. Key Epoxy/Urethane Wall Coatings System should be used wherever a high-build, corrosive resistant, protective wall coating is required. Having a low odor, installation can occur in occupied areas. Key Epoxy/Urethane Wall Coatings System provides a smooth, high gloss finish with a light orange peel finish and can be incorporated into seamless floor cove base systems.

KEY #783 is a 100% solids, semi-rigid epoxy novolac joint filler used to provide chemical resistant protection for saw-cut joints (contraction/control joints) in concrete slabs or to repair existing damaged joints. KEY #783 absorbs the impact and shock of heavy loads and steel wheeled traffic, preventing erosion of control joint edges.

Key High-Build Coating of KEY RESIN COMPANY formulates a variety of epoxy and polyurethane coatings specially designed to protect floors from various degrees of chemical attack and abrasion. HIGH-BUILD SYSTEMS, typically installed at 15-30 mils thickness, provide a brighter environment with improved cleanability and wear over concrete surfaces.

KEY #715 is a 100% solids epoxy crack filler used to patch or repair floor and wall surfaces. KEY #715 is the ideal material for repair of concrete surfaces damaged from environmental or chemical attack. KEY #715 can also be used as a base material beneath coating, slurry, and mortar systems to repair defects in the concrete before coating.

KEY #780 is a 100% solids semi-rigid epoxy joint filler used to protect saw cut joints in concrete slabs or in repair of existing damaged joints. KEY #780 absorbs the impact and shock of heavy loads and steel wheeled traffic, preventing erosion of control joint edges. KEY #780 is available in Regular Cure (RC), Fast Cure (FC), and Super Fast Cure (SFC) formulations.

KEY #540 is a 100% solid epoxy coating for use as an industrial coating and chemical resistant liner for interiors of wastewater treatment tanks, structures, lift stations, pipes, manholes and secondary containment of dilute, acids and alkalis. KEY #540 protects concrete and steel from chemicals and wastewater in immersion, splash and spillage conditions. KEY #540 is specifically designed for lining manholes, large diameter sewer pipe, lift stations and other structure. When applied over prepared concrete, KEY #540 produces a seamless, monolithic liner.