Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Key Advantages
- Excellent abrasion and mar resistance
- Excellent clarity and color retention
- Excellent UV resistance
- Seals substrate from moisture penetration
- Low maintenance finish
- Composition
Acrylic Copolymer.
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Key Considerations
- Contains solvent, must be applied with properventilation
- Substrate temperature must be a minimum of 50ºF
- Substrate must be free of dirt, waxes, curing agents, and other foreign materials
- Application
Surface Preparation
Surface Preparation is the most critical portion to any successful resinous flooring system application. All substrates must be properly prepared as outlined in Key Resin Technical Bulletin #1. Work must be performed by trained or experienced contractors or maintenance personnel.
Mixing Instructions
Apply KEY #801 using a roller, brush, or lambs wool/microfiber applicator. Care should be taken to minimize the entrapment of air caused by over-rolling. Two coats are recommended for sealing applications.
Clean Up
Clean skin with soap and water. Tools and equipment should be cleaned with xylene or lacquer thinner.
- Maintenance
After completing the application of KEY #625, the installer should provide the owner with maintenance instructions. KEY #625 is easily cleaned with neutral soaps or detergents.
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Cure Time Working Life (75°F) | 2 - 3 | hours | — |
| Cure Time Dry to Touch (75°F) | 2 - 6 | hours | — |
| Cure Time Recoat (75ºF) | 2022-02-06 | hours | — |
| Cure Time Light Foot Traffic Service (75°F) | 24.0 | hours | — |
| Cure Time Full Cure & Maximum Resistance | 5 Days | — | — |
| Mixing Ratio | Single Component | — | — |
| Solids Content (by Volume) | 20.0 | % | — |
| Volatile Organic Content (VOC) | 746.0 | g/l | EPA Method 24, Compliant to low VOC Rule 1113 in all 50 states |
| Weight (Mixed) | 7.5 - 8.0 | lbs/gal | — |
| Viscosity | 950.0 | cps | — |
| Coverage (1 mil) | 300.0 | ft²/gallon | — |
Packaging & Availability
- Availability
Key Resin materials are available throughout the United States, Canada, and a number of other countries.