Products

KEY #783 is a 100% solids, semi-rigid epoxy novolac joint filler used to provide chemical resistant protection for saw-cut joints (contraction/control joints) in concrete slabs or to repair existing damaged joints. KEY #783 absorbs the impact and shock of heavy loads and steel wheeled traffic, preventing erosion of control joint edges.

KEY #815 is a polymer acrylic liquid specially formulated as a binder for KEY #815 POLYMERIC BLOCK FILLER and KEY POOL DECK SYSTEM. KEY #815 is easy to mix and apply, providing a pinhole-free filling for interior and exterior masonry surfaces. A “stiff mix” of KEY #815 POLYMERIC BLOCK FILLER can be used to patch holes and cracks. KEY #815 POLYMERIC BLOCK FILLER is suitable for use beneath all KEY RESIN WALL COATING SYSTEMS as a substitute for epoxy block filler.

KEY #780 is a 100% solids semi-rigid epoxy joint filler used to protect saw cut joints in concrete slabs or in repair of existing damaged joints. KEY #780 absorbs the impact and shock of heavy loads and steel wheeled traffic, preventing erosion of control joint edges. KEY #780 is available in Regular Cure (RC), Fast Cure (FC), and Super Fast Cure (SFC) formulations.

Key #805 Acrylic Sealer is a pigmented waterborne acrylic resin formulated to create a tough UV and abrasion resistant film that protects concrete surfaces from moisture penetration, staining, dirt, wear, and provides a surface that is easy to clean and maintain. KEY #805 is used as a sealer for KEY POOL DECK SYSTEM and for sealing old and new polymer concrete floors, exterior ramps, decks, patios and sidewalks. KEY #805 is an environmentally safe material with quick recoat and easy clean-up after installation.

KEY #715 is a 100% solids epoxy crack filler used to patch or repair floor and wall surfaces. KEY #715 is the ideal material for repair of concrete surfaces damaged from environmental or chemical attack. KEY #715 can also be used as a base material beneath coating, slurry, and mortar systems to repair defects in the concrete before coating.

Key #803 Acrylic Sealer is a clear acrylic emulsion formulated to create a clear, non-yellowing, protective coating. KEY #803 provides a tough, UV and abrasion resistant film that protects surfaces from moisture penetration, staining, dirt, dust, wear, and provides a surface that is easy to clean and maintain. KEY #803 is an excellent choice for interior applications. KEY #803 is designed as an effective terrazzo sealer thereby replacing solvent-based acrylic sealers. KEY #803 can be used to seal concrete, masonry, brick, Saltillo tiles, or any cementitious substrate. While it is a clear-drying formulation, it will tend to impart a rich darkening, or “wet look” quality to many substrates, especially those of a dark or tinted nature.

KEY #730-FC is a 100% solids fast cure epoxy adhesive/filler with <10 min. working time. KEY #730-FC is used to bond most materials including flooring materials, precast base, divider strip, marble/granite, ceramics, glass, cement board and drywall. KEY #730-FC is durable and impact resistant making it the ideal material for repair of concrete cracks, etc.

Key #804 Acrylic Sealer is a water-based, clear acrylic emulsion formulated to create a clear, non-yellowing, protective coating. KEY #804 provides a tough, UV and abrasion resistant film that protects surfaces from moisture penetration, staining, dirt, dust, wear, and provides a surface that is easy to clean and maintain. KEY #804 is an excellent choice for interior or exterior applications. KEY #804 is designed as an effective water-based terrazzo sealer thereby replacing solvent-based acrylic sealers. KEY #804 can be used to seal concrete, decorative concrete toppings, masonry, brick, Saltillo tiles, or any cementitious substrate. While it is a clear-drying formulation, it will tend to impart a rich darkening, or “wet look” quality to many substrates, especially those of a dark or tinted nature.

Key #801 Acrylic Sealer is a clear acrylic solution formulated to create a clear, non-yellowing protective coating. KEY #801 provides a tough, UV and abrasion resistant film that protects surfaces from moisture penetration, staining, dirt, dust, and wear. KEY #801 is an excellent choice for both interior and exterior applications. KEY #801 is most commonly used as a sealer for KEY EPOXY TERRAZZO flooring system. It is also used for sealing old and new concrete floors, exterior ramps, decks, sidewalks, slate, and exposed aggregate surfaces.

KEY #540 is a 100% solid epoxy coating for use as an industrial coating and chemical resistant liner for interiors of wastewater treatment tanks, structures, lift stations, pipes, manholes and secondary containment of dilute, acids and alkalis. KEY #540 protects concrete and steel from chemicals and wastewater in immersion, splash and spillage conditions. KEY #540 is specifically designed for lining manholes, large diameter sewer pipe, lift stations and other structure. When applied over prepared concrete, KEY #540 produces a seamless, monolithic liner.