Products

Mason Corporation Stannous Sulfate is a white to slightly yellow, heavy crystalline powder. It is commonly used in acid tin plating baths, liquor finishing and drawing of steel wire. It delivers high current efficiency and smooth, fine-grained deposits. From this bright finish can be obtained by flow melting of through the use of certain additives.

Mason Corporation Stannic Chloride Solution 50% is a Tin Tetrachloride solution or Tin (IV) Chloride solution. It is a clear to a pale yellow aqueous solution and its applications are similar to Stannic Chloride Anhydrous.

Mason Corporation Stannic Chloride Anhydrous is a clear, colorless, heavy fuming liquid. It fumes in moist air to form basic chloride, solid and semisolid hydrates and liberates vapors of hydrogen chloride. It is miscible with most hydrocarbons and chlorinated hydrocarbons. It is of the highest purity found in the world with no free chlorine present in the final product.

Mason Corporation Stannous Oxide is a dense, black crystalline powder with no odor and is insoluble in water. This black, lustrous Stannous Oxide has become the option of all mechanical platers in the United States.

Mason Corporation Stannic Chloride Pentahydrate is a solid that is completely soluble in water or alcohol and is available in lump or crushed form. It is hygroscopic and will absorb water. This form of Stannic Chloride is used where the anhydrous product is not required because it is easier to handle and eliminates many of the handling precautions necessary for the Stannic Chloride Anhydrous (fuming liquid).

Mason Corporation Stannous Chloride Dihydrate may be substituted effectively in numerous applications for Stannous Chloride Anhydrous. It is acknowledged to be more difficult to handle because of its low melting point.

Mason Corporation Stannous Chloride Anhydrous has a large and diverse scope of applications and is used in a wide range of industries. It is used for metallic surfaces or glass and plastic as a sensitizing agent in preparing glass and plastic for metalizing e.g., mirrors, metalized glazing and electronic components on a plastic base.

Mason Corporation Potassium Stannate is a water-soluble white/off-white odorless crystal. It is an alkaline tin plating electrolyte that produces a high-quality deposit. It is also used for immersion tinning of aluminum alloys. It is non-corrosive to steel plating tanks and has a higher current density and more concentrated solutions are possible because of its high solubility resulting in faster plating rates.

Mason Corporation Stannous Sulfate Solution 180g/L is a clear to yellow liquid with a trace of the precipitate. This is used in electroplating, color anodizing and specializes in high quality with low impurities for plating baths.

Mason Corporation Stannous Chloride Solution is blended material using Stannous Chloride Anhydrous or Dihydrate, H2O, and HCL. In this product concentration of acid and tin may be determined by the customer’s needs.