Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- 8481 Premium Carbon Conductive Grease
Similar to the 846, but with improved thermal stability and corrosion resistance.
- Extra-strong corrosion resistance, withstands over 300 hours of salt fog exposure.
- Resists separation
- Silicone Free
- Key Attributes
- Ensures continuous electrical contact between pitted, scratched, loose, or vibrating connectors
- Prevents arcing, pitting, hotspots, and
- Prevents corrosion
- Lubricates
- Repels water and humidity
- Safe on plastics
- Thin bond line capabilities
- Volume resistivity of 160 Ω·cm
- Improves electrical connections between irregular and pitted surfaces
- Ensures electrical contact between loose or vibrating parts
- Prevents arcing, pitting, hotspots and welds
- Reduces mechanical wear
- Excellent corrosion resistance—passed ASTM B117 salt fog test >550 hours
- Excellent thermal stability—does not separate because of temperature cycling
- Silicone-free
Applications & Uses
- Applications
- Application Instructions
To apply the grease:
- Wear protective gloves.
- Clean and dry the surface being lubricated with a lint-free cloth or brush and a zero-residue cleaning solvent, such as MG 824 Isopropyl Alcohol.
- Apply a thin, even layer of grease using a spatula or other appropriate applicator.
Attention!
Carbon grease is messy and transfers easily. Be careful not to spread it beyond the intended area.- Application
- Audio jacks
- Automotive connectors
- Battery terminals
- Bus bars
- Light sockets
- Headlights
- HVAC connections
- Ground connections
- Rotating connections
- Power cords and jacks
- Slip Rings
- Plugs and sockets
- Slide connectors
- Sound systems
Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Grease Properties
- Synthetic Oil Properties
- Temperature Properties
- Carbon Conductive Greases Comparison Chart
8481
846
847
PROPERTIES
Conductive filler
Carbon, graphite
Carbon
Carbon
Base material
Synthetic oil
Silicone oil
Synthetic oil
Constant service temperature
-68 to 165 °C [-90 to 329 °F]
-50 to 200 °C [-58 to 392 °F]
-68 to 165 °C [-90 to 329 °F]
Electrical Properties
Volume resistivity (rv)
160 W·cm
114 W·cm
23 W·cm
Volume conductivity (sv)
0.006 S/cm
0.009 S/cm
0.04 S/cm
Thermal Properties
Thermal conductivity at 25 °C [77 °F]
0.29 W/(m·K)
N/E
N/E
Grease Properties
Evaporation loss, 22 h at 165 °C [329 °F]
2.0
2.6
0.3
Oil separation, 30 h at 165 °C [329 °F]
5.0
0.4
1.8
Dropping point
>300°C [>572 °F]
>304 °C [>579 °F]
>304 °C [>579 °F]
Water washout at 38 °C [100 °F]
0.9
1.3
0.2
Emcor rust test, distilled water
0, no corrosion
1
3
Worked penetration, 60 strokes, ½ scale
315
269
174
Physical Properties
Color
Black
Black
Black
Odor
Odorless
Odorless
Odorless
Density at 25 °C [77 °F]
1.01 g/mL
1.05 g/mL
1.07 g/mL
Viscosity
128 Pa·s
386 Pa·s
N/E
Lubricant
Yes
Yes
Yes
Bleed resistant
Yes
No
Yes
Corrosion resistant
Yes
Yes
Yes
VOC (Volatile Organic Compound)
4%
0
0
Synthetic Oil Properties
Oil viscosity index
>110 °C [>230 °F]
N/A
>110 °C [>230 °F]
Fire point
321 °C [610 °F]
N/A
321 °C [610 °F]
Flash point
>290 °C [>554 °F]
N/A
>290 °C [>554 °F]
- Grease Properties Note
- a) Thermal cycling of ten cycles from -40 to 121 °C [-40 to 250 °F]. b) Bearing dried at 77 °C [171 °F]. c) Aluminum 2024 coupons with 254 μm [10 mil] film thickness and >550 h exposure to 5% salt spray
- Physical and Synthetic Oil Properties Note
- Values based on synthetic oil component only
- a) Brookfield viscometer at 12 rpm with spindle RV S94.
- b) High oil viscosity index of more than 100 indicates a small oil viscosity change with temperature.
- c) Temperature at which the oil will continue to burn for at least 5 s after ignition with an open flame.
- d) Cleveland open cup method.
- Temperature Properties Note
- a) Cold storage avoids material separation and settling. If storing at room temperature, mix thoroughly to disperse filler before use.
Value | Units | Test Method / Conditions | |
Viscosity (at 25 °C, 77 °F) | 128 ⁽ᵃ⁾ | Pa·s | IPCTM-65- Method 2.4.24.4 |
Bleed Resistant | Yes | — | — |
Corrosion Resistant | Yes | — | — |
Lubricant | Yes | — | — |
Odor | Odorless | — | — |
Density (at 25 °C, 77 °F) | 1.01 | g/mL | ASTM D 1475 |
Volatile Organic Compound (VOC) | 4 | % | Calculated |
Value | Units | Test Method / Conditions | |
Thermal Conductivity (at 25 °C, 77 °F) | 0.29 | W/(m·K) | ASTM E 1461 |
Value | Units | Test Method / Conditions | |
Volume Conductivity (Σv) | 0.006 | S/cm | Mil-Std-883J Method 5011.6 |
Volume Resistivity (ΡV) | 160 | Ω·cm | Mil-Std-883J Method 5011.6 |
Value | Units | Test Method / Conditions | |
Worked Penetration (10,000 Strokes) | 319 | — | ASTM D 217 |
Emcor Rust Test, Distilled Water | 0, no corrosion | — | IP 220 |
Dropping Point | min. 300 (min. 572) | °C(°F) | ASTM D 2265 |
Salt Spray Corrosion Resistance ⁽ᶜ⁾ | Passed min. 550 h | — | ASTM B 117 |
Water Washout (at 38 °C, 100 °F) ⁽ᵇ⁾ | 0.009 | % | ASTM D 1264 |
Oil Separation | Slight oil separation | — | Boeing test a) |
Evaporation Loss (22 h at 165 °C, 329 °F) | 2 | — | ASTM D 2595 |
Oil Separation (30 h at 165 °C, 329 °F) | 5 | % | ASTM D 6184 |
Worked Penetration (60 Strokes) | 315 | — | ASTM D 217 |
Value | Units | Test Method / Conditions | |
Fire Point ⁽ᶜ⁾ | 321 (610) | °C(°F) | ASTM D 92 |
Oil Viscosity Index ⁽ᵇ⁾ | min. 110 (min. 230) | °C(°F) | ASTM D 2270 |
Flash Point ⁽ᵈ⁾ | min. 290 (min. 554) | °C(°F) | ASTM D 92 |
Value | Units | Test Method / Conditions | |
Storage Temperature Limits ⁽ᵃ⁾ | -10 to 40 (14 to 104) | °C(°F) | — |
Constant Service Temperature | -68 to 165 (-90 to 329) | °C(°F) | — |
Regulatory & Compliance
Safety & Health
- Health, Safety, and Environmental Awareness
- Please see the 8481 Safety Data Sheet (SDS) for further details on transportation, storage, handling, safety guidelines, and regulatory compliance.
Packaging & Availability
- Packaging and Supporting Products
Cat. No. Packaging Net Volume Net Weight Packaged Weight 8481-1
(8481-85ML)Tube 85 mL [2.87 fl oz] 85.4 g [3.07 oz] 0.12 kg [0.26 lb] 8481-2
(8481-1P)Jar 462 mL [15.6 fl oz] 465 g [1.02 lb] 0.52 kg [1.14 lb] 8481-3
(8481-1G)Pail 3.78 L [1.00 gal] 3.79 kg [8.37 lb] 4.04 kg [8.90 lb]
Storage & Handling
- Shelf Life
- 5 y
- Storage
- Store between -40 and 40 °C [40 and 104 °F] in dry area.