Products

407D is designed to provide optimal cleaning power while remaining safe for equipment. It efficiently removes greases, oils, carbon, static, dirt, and grime. This product is used for cleaning components of VCR, CD, DVD, Blu-ray, magnetic backup systems, mini-video tape cameras, and mini cassette players. It is also used for cleaning disk heads, optical tape drive lens, and magnetic tape heads.

The 411 HFE Electronics Cleaner is a hydrofluroether, zero residue, plastic safe, non-flammable, and nonconductive cleaner degreaser that can be used on live circuits. The cleaner provides a high degree of safety for the equipment, workers, and the environment without sacrificing performance. It is approved by the EPA under the SNAP program as a low toxicity replacement of ozone-depleting substances. It offers a similar cleaning performance to similar CFC type cleaners but without the accompanying safety concerns. Due to its high density, low surface tension, and low viscosity, the 411 cleaner will easily drip off even the most complex geometries without becoming trapped in small spaces.

The 4050 Safety Wash for Electronics is a high purity, printed circuit board cleaner and solvent. It uses a blend of high purity ethyl alcohol, isopropyl alcohol, and ethyl acetate components designed not to leave solvent contaminations behind. The alcohol and organic solvent blend is sufficiently strong to dissolve light to moderate grease and organic contaminants, as well as being polar enough to remove ionic flux residues and inorganic soils. It is an excellent choice when IPA alone is not powerful enough to dissolve greasy contaminants.

8361A-P label and adhesive remover pen applies a solvent that soaks through labels to dissolve the adhesive backing, releasing the label. It can then be used to quickly clean up adhesive residues left behind. It can also be used to remove some inks and cured adhesives.

The 826 Static Off™ Antistatic Foaming Spray has non-drip formulation that effectively polishes and eliminates static charges with a single application. The spray is safe on all surfaces and gives a streak-free finish for improved optical clarity and distortion-free reading.

The 408A Rubber Renue™ restores old rubber parts that have become hard and lost their tackiness and flexibility. It causes the rubber to swell, allowing dirt to come out of its pores. When the solvent dries, the rubber returns to its form and remains tacky, allowing rollers and platens to retain their grip.

8309 is a liquid conformal coating stripper that readily removes most thermoplastic and non-cross linked coatings, such as acrylics, urethanes, and silicones based conformal coatings. It also facilitates the removal of some thermoset coatings, like cross-linked silicones and polyurethanes, by softening or swelling the coat to aid with mechanical removal. This stripper is safe for most types of PCB components.

The 825 Glass Cleaner is an all-purpose, non-streaking, and high foaming action cleaner. It removes dusts, fingerprints, light oils, and residues, leaving surfaces bright and clean.

The 406B Super Wash™ Electronics Cleaner is a very fast drying and zero residue cleaner degreaser for PC boards. This hydrocarbon-based cleaner is perfect for quick PC boards cleaning. When used as a secondary rinse, it accelerates the drying time of boards treated with slower drying cleaners. Great for dissolving many types of flux. Cleans and degreases printed circuit boards, machinery, electrical and electronic devices.

The 401B Nu-Trol™ Control Cleaner for Electronics is a unique blend of high purity solvents and a lubricating mineral oil that is excellent for cleaning and lubricating delicate moving parts in electronics. The solvent system also effectively dissolves oil and organic residues. This product is useful in a variety of electronics applications such as controls, potentiometers, dials, switches, tuners, and servomechanisms.

8309 is a liquid conformal coating stripper that readily removes most thermoplastic and non-cross linked coatings, such as acrylics, urethanes, and silicones based conformal coatings. It also facilitates the removal of some thermoset coatings, like cross-linked silicones and polyurethanes, by softening or swelling the coat to aid with mechanical removal. This stripper is safe for most types of PCB components.

402C spray duster is a pressurized gas duster made with 100% HFO-1234ze which is non-flammable, non-conductive, moisture free, zero residue, and has a global warming potential of less than 1. Its powerful blast blows away microscopic dust, lint, and foreign particles. Recommended for use in home or office over 402A.

8310A is a conformal coating stripper that readily removes most thermoplastic and on-cross linked coatings such as acrylics, urethanes, and silicones based conformal coatings. It also facilitates the removal of some thermoset coatings like cross-linked silicones and polyurethanes by softening or swelling the coat to aid with mechanical removal. This stripper is safe for most types of PCB components.

8361 Label and Adhesive Remover is formulated to effectively remove adhesive, sticker, and ink residues. It contains a pleasant odor which makes the product easy to work with.

The 824 Isopropyl Alcohol (IPA) is a high purity cleaner and solvent. The purity level meets Grade A standard for MIL Spec TT-I-735A and ASTM D770, ensuring that no contamination occurs from its use. As a cleaner, it is fully miscible in water and most organic fluids, making it good at dissolving dirt, light organic contaminants, and ionic flux residues. Since the 824 is highly anhydrous (without water) and hygroscopic (absorbs humidity), it readily scavenges water off surfaces, trapping the water in the IPA solution as an azeotropic mixture. This helps to dehumidify surfaces. As a solvent, it acts as a moderate evaporation, ‘plastic safe’ diluent (see compatibility chart on page 3) and is used to improve the properties of paint resins and other heterogeneous solid mixtures. Therefore, it serves as a useful carrier solvent to adjust the rheological properties and compatibilities of complex mixtures. Due to IPA’s volatility, it resists entrapment in the coating. As it dries, it gives off a very light odor, which is not bothersome but serves as a cue to limit over-exposure due to poor ventilation.

408C restores old rubber parts that have become hard and lost their tackiness and flexibility. It causes the rubber to expand, allowing dirt to be removed from its pores. When the solvent dries, the rubber returns to its form and remains tacky. This product restores the tackiness of platens and rollers as well as helping remove dirt, ink, and sticky residues. It may also restore the flexibility of belts, conveyors, and seals.

The 407C Audio Video Head Cleaner is designed to provide optimal cleaning power while remaining safe for equipment. It efficiently removes greases, oils, carbon, static, dirt, and grim. The 407C is used for cleaning components of VCR, CD, DVD, Blu Ray, magnetic backup systems, mini video tape cameras, and mini-cassette players. It is also used for cleaning disk heads, optical tape drive lens, and magnetic tape heads.

824-400ML - Isopropyl Alcohol Spray UK This is 99.9% ACS reagent grade isopropyl alcohol aerosol spray for cleaning electronics. Good solvency, low surface tension, and aerosol pressure make it an effective flux remover and general electronics cleaner. It effectively cleans ionic, polar and non-polar residues. It is safe on most painted surfaces, plastics, and elastomers. It leaves no residue, evaporates quickly relative to water, and does not cause corrosion. It is anhydrous, hydroscopic, and fully miscible with water. It is low toxicity compared to alternative solvents and is similarly relatively environmentally benign, being ozone safe with excellent “green solvent” scores. This product is packaged as an aerosol, however, it is also offered as a liquid and as a presaturated wipe. Additionally, we offer liquid 70% IPA and 70% IPA presaturated wipes.

8241 Isopropyl Alcohol 70/30 is an electronics cleaner. The liquid is fully miscible with water and a large variety of organic solvents, making it good at dissolving dirt, dust, greases, and light organic contaminants. It is quick drying relative to water and leaves no residue. As it dries, it gives off a light alcohol odor, which is not bothersome and serves as a cue to limit over-exposure due to poor ventilation. Since it is safe for paints, metals, and plastics, 8241 is widely used to clean a variety of electronic equipment and peripherals. Another use is to wash off harsh organic solvents like acetone that might damage the substrate surface.

The 824 Isopropyl Alcohol (IPA) liquid is a high purity cleaner for electronics. The purity level meets Grade A standard for MIL Spec TT-I-735A and ASTM D770, ensuring that no contamination occurs from its use. As a cleaner for electronics, it is fully miscible in water and most organic fluids, making it good at dissolving dirt, light organic contaminants, and ionic flux residues. Since the 824 is highly anhydrous (without water) and hygroscopic (absorbs humidity), it readily scavenges water off surfaces, trapping the water in the IPA solution as an azeotropic mixture. This helps to dehumidify surfaces. As a solvent, it acts as a moderate evaporation, ‘plastic safe’ diluent (see compatibility chart on page 3) and is used to improve the properties of paint resins and other heterogeneous solid mixtures. Therefore, it serves as a useful carrier solvent to adjust the rheological properties and compatibilities of complex mixtures. Due to IPA’s volatility, it resists entrapment in the coating. As it dries, it gives off a very light odor, which is not bothersome but serves as a cue to limit over-exposure due to poor ventilation.

The 4351 Thinner 1 is a mild diluent designed for MG Chemical’s EMI/RFI shielding products.

The 433C d-Limonene is an industrial grade solvent. It is a biodegradable product with a pleasant odor.

The 402A Super Duster™ 134 is a pure, non-flammable duster that can be used on live electronic and electrical equipment. The duster contains pure 1,1,1,2-tetrafluoroethane (HFC 134a), which delivers a constant, high-pressure cleaning jet. The gas jet is dry, low-residue, and chemically inert, which makes it safe for cleaning electrical and electronic components. The 402A duster is ideal for removing lint, dust, and other debris from printed circuit boards, electronic devices, and computers. It helps prevent malfunctions and lengthens component life.