Miracote

MiraPatch LM is a two-component, polymer-modified, cementitious underlayment and embedment mortar specifically designed for the encapsulation of expanded metal lath reinforcement when installing MiraFlex II Decking System over plywood substrates. MiraPatch LM is also suitable for a variety of uses including underlayment for tile, carpet, other flooring finishes, concrete surface repairs, leveling and sloping.

MiraPatch RM 3000 is a single component, polymer-modified, pre-blended cementitious repair mortar fortified with micro-fiber reinforcement and shrinkage-compensating additives to achieve exceptional physical properties with very low drying shrinkage. Designed for horizontal and vertical applications, MiraPatch RM 3000 can be troweled-applied at a minimum depth 1/8” up to 1”. For repair depths 1” and greater, extend mortar with 3/8” clean coarse aggregate to produce MiraPatch RM 3000 concrete.

MiraFlor WB is a two-component, 40% solids, water-based self-priming epoxy coating designed for use in multiple types of flooring applications. It can be installed neat for thin film flooring applications or with the addition of synthetic aggregate for improved slip resistance.

MiraGard Colorbond SR is a single component, self-crosslinking, and solar-reflective pigmented acrylic coating designed for application on concrete plaza decks, balconies, roof deck surfaces, and as a topcoat for polymer modified cementitious coatings such as Miracote MPC. An important characteristic of MiraGard Colorbond SR is that it increases the solar reflectance index (SRI) of the exposed surface, which results in a significantly cooler surface. It also features excellent hiding attributes, wash-down characteristics and provides excellent weathering and wear resistance. MiraGard Colorbond SR Topcoat is an easy to apply economical coating. It is recommended for resealing some Miracote systems to improve overall energy savings, via reduction in conditioned air utility costs. It may be applied to properly prepared surfaces where stain resistance and cleanability are a consideration.

MiraGard HDWB is a single component, water-based, self-crosslinking pure acrylic sealer designed for interior or exterior use over Miracote cementitious coatings, overlays, and MiraGard Colorbond XL to enhance stain resistance and cleanability. Exhibiting excellent chemical and abrasion resistance, MiraGard HDWB is also most suitable for use to seal new and existing concrete, masonry, wood and many other surfaces.

Miraflor ESD is a two-component, chemically resistant, water-based epoxy floor coating system available in gloss and satin formulations.

MiraGard HD50 is a unique, single component, solvent-based, ultra-hard clear acrylic sealer that offers a maximum VOC content of less than 50 grams per liter. Designed for use on interior and exterior conventional concrete, exposed aggregate and decorative concrete, cementitious coatings and overlays, MiraGard HD 50 Sealer is also suitable for unglazed brick or tile, and many other masonry surfaces to provide a “wet look”.

Miraflor Metallux System is a unique architectural, high-solids, resinous floor coating that utilizes metallic and pearlescent powder integral pigments to produce brilliant and dynamic designer effects for illumination and beautification of concrete floors and other surfaces. Although suitable for the metallic pigmentation any clear, high-solids MiraFlor polymeric flooring resin, MiraFlor Metallux integral pigments are most frequently used in conjunction with MiraFlor CQ Clear Epoxy for economy and ease of use. Depending on specific service conditions and owner requirements, MiraFlor Glazetop and MiraFlor Glazetop FC are also excellent choices for use with MiraFlor Metallux pigments.

MiraPatch RM1 is a two-component, polymer-modified, cementitious, trowel-grade concrete repair mortar and high performance underlayment for Miracote and other subsequent finished flooring installations. Designed primarily for horizontal applications, MiraPatch RM1 can be applied from near feather up to 3/4” in thickness. It can also be used in vertical and overhead applications when repair methods using formwork are being utilized. For applications greater than 3/4” in depth, extend MiraPatch RM1 with coarse ¼” (3/4” to 1”) or 3/8” (>1”) clean aggregate to produce MiraPatch RM1 concrete which will enhance dimensional stability.