Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Key Attributes
- BioPBS™ containing renewable carbon.
- BioPBS™ fully biodegradable even at ambient temperature and compostable (EN13432).
- BioPBS™ compatible with end-of life both recycling (repulping operation) and composting even in backyard.
- BioPBS™ is contribution to circular economy.
- BioPBS™ safe for you and planet. It is food contact, approved by FDA, EU and JHOSPA.
- BioPBS™ has processability similar to Polyethylene (PE).
- Product Features
- Good processability and flow ability, easy ejection of parts from the mold
- Soft and flexible, good impact property
- Good dimensional stability
- Short cycle time
- Superior heat resistance compared to other bioplastics
- FZ71PM is food contact grade, approved by FDA (FCN No. 1817) and JHOSPA, comply to EU10/2011
- OK COMPOST certified by TUV Austria in European Union, BPI in North America and ABA in Australia
- Renewable content certified by DIN CERTCO, JBPA and USDA
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Typical Properties
- Processing Properties
Value | Units | Test Method / Conditions | |
Density | 1.26 | g/cm³ | ISO 1183 |
Melt Flow Rate (at 190°C, 2.16 kg) | 22 | g/10 min | ISO 1133 |
Melting Point | 115 | °C | ISO 3146 |
Yield Stress | 40 | MPa | ISO 527-2 |
Stress (at Break) | 30 | MPa | ISO 527-2 |
Strain (at Break) | 170 | % | ISO 527-2 |
Flexural Modulus | 630 | MPa | ISO 178 |
Flexural Strength | 40 | MPa | ISO 178 |
Izod Impact Strength (at 23°C) | 7 | kJ/m² | ISO 180 |
Heat Deflection Temperature (at 0.45 MPa) | 95 | °C | ISO 75-2 |
Hardness, Rockwell Scale R | 107 | R Scale | ISO 2039-2 |
Value | Units | Test Method / Conditions | |
Nozzle | 190 | °C | — |
Front Cylinder | 200 | °C | — |
Middle Cylinder | 190 | °C | — |
Rear Cylinder | 180 | °C | — |
Hopper | 60 | °C | — |
Mold | 2540 | °C | — |
Mold Shrinkage | 1.4 | % | — |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Condition
BioPBS™ pellet is dried and packed in aluminum-lined packaging before delivering to customers. Do not store outdoors. Keep dry at ambient temperature. Avoid humid environment, heat and direct sunlight. Use material within 6 months after delivery date, in order to prevent possible material quality deterioration. Pre-dry of the unopened BioPBS™ is not necessary. It is recommended to keep packages sealed until ready to process and using up the whole 25-kg bag. Unused material should be tightly sealed, kept away from open air, and pre-dried (Temperature 80°C for over 5 hours) to moisture content of less than 1,000 ppm (preferable less than 700 ppm) prior to using next time.