Products

Duratron® D7015G PI Polyimide is a high-performance bearing grade material that offers exceptional temperature and wear resistance. With a low coefficient of friction, this material is ideal for use in applications where high loads and speeds are a critical factor.Features:15% graphite added for long wear and frictionSuperior temperature and wear resistanceLow coefficient of frictionMaintains performance abilities with or without lubricationBenefits:Excellent choice for bearing, bushing, and seal applications where higher loads or speeds are a significant factorProvides long-lasting performance in harsh environmentsLow maintenance and long-lasting partsApplications:Bearings and bushings in high-temperature environmentsSeals for high-speed or high-load applicationsMachine parts and components in harsh environments where temperature and wear resistance are needed.

Nylatron® GS PA66 is a premium grade of Polyamide PA66, reinforced with Molybdenum Disulphide (MoS2) to enhance its mechanical properties. This unique combination of materials offers outstanding strength, rigidity, and a lower coefficient of linear thermal expansion than other nylon products.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding propertiesExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Maintains fits and clearances, reducing the likelihood of seizing as bearingsEnhanced bearing and wear properties due to MoS2Excellent performance in high-precision applicationsApplications:Ideal for use in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats, and seals in construction and heavy equipment industries.Can also be used in other high wear and load-bearing applications.Nylatron® GS PA66 is a superior choice for applications that require high strength, rigidity and wear resistance, making it a perfect solution for construction and heavy equipment industries.

Nylatron® GS PA66 is a premium grade of Polyamide PA66, reinforced with Molybdenum Disulphide (MoS2) to enhance its mechanical properties. This unique combination of materials offers outstanding strength, rigidity, and a lower coefficient of linear thermal expansion than other nylon products.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding propertiesExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Maintains fits and clearances, reducing the likelihood of seizing as bearingsEnhanced bearing and wear properties due to MoS2Excellent performance in high-precision applicationsApplications:Ideal for use in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats, and seals in construction and heavy equipment industries.Can also be used in other high wear and load-bearing applications.Nylatron® GS PA66 is a superior choice for applications that require high strength, rigidity and wear resistance, making it a perfect solution for construction and heavy equipment industries.

KyronMAX® S-4340 is a hi-temp PPA injection molding compound filled with ultra high strength carbon fiber. No stock shapes offered, only injection molding pellets.

Nylatron® MC 901 Heat Stabilized (HS) Polyamide PA6 shapes are a durable and versatile solution for industrial applications that require long-term thermal stability and high mechanical properties.Features:Long-term thermal stability up to 260° F (126° C)Outstanding mechanical strength, rigidity, hardness, and toughnessGreat sliding properties and wear resistanceSuperior resistance to high-energy radiationExcellent electrical insulationBenefits:Provides reliable performance in high temperature environmentsResists wear and tear in industrial applicationsOffers high resistance to high-energy radiationProvides excellent electrical insulationApplications:Conveyor wear componentsBushingsSheavesWear padsValve seats and sealsCustom parts and gearswheels

Ertacetal H-TF (POM-H + PTFE) is a Delrin® AF Blend, a combination of PTFE fibers evenly dispersed in a Delrin acetal resin. This material offers superior sliding properties, making it ideal for bearings, gears, and other low-friction applications. Compared to Ertacetal C and H, Ertacetal H-TF offers improved performance and longer wear life.Features:Low friction, long wearingHigh strength and toughnessHigh dimensional stability and machinabilityPTFE fibers evenly dispersed in a Delrin acetal resinBenefits:Reduced stick-slip behavior in bearings and other low-friction applicationsIncreased wear resistance and longer lifespanImproved performance in harsh environmentsFood-contact compliant for use in the food processing and packaging industryApplications:BearingsGearsPulleysConveyor wear partsAny other low-friction application requiring high strength and dimensional stability.

Nylatron® SLG Polyamide PA6 oil-filled shapes are the perfect solution for industrial applications that require low coefficient of friction, high mechanical strength and rigidity, and outstanding wear resistance. Developed specifically for non-lubricated, highly loaded, and slowly moving parts, these shapes offer a number of benefits over conventional cast nylon grades.Features:Broadest size range availabilityExcellent wear resistanceGood mechanical and electrical propertiesIdeal balance of strength and toughnessInternally lubricated and heat stabilizedBenefits:Low coefficient of friction and sliding propertiesHigh mechanical strength and rigidityOutstanding wear resistanceLonger service life and lower maintenance costs compared to conventional cast nylon gradesApplications:Ideal for use in industrial environmentsSuitable for non-lubricated, highly loaded, and slowly moving parts such as gears, bearings, bushings, and wear pads.

KyronMAX® S-2230 is a high-performance polymer that combines the excellent strength and toughness of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength and stiffness are required, making it ideal for components that will be exposed to high stress, high impact and high temperature environments.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent toughness and impact resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tear and high temperatureEnhanced performance and durability of your productsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industriesComponents that require high strength and stiffness, such as gears, bearing components, and bushingsIndustrial and manufacturing equipment where high strength and stiffness is neededComponents that require high strength and stiffness in harsh environments, such as those exposed to high temperature and stress.KyronMAX® S-2230 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

Ertalon® 6 XAU+ Polyamide PA6 is a polyamide PA6 material that is heat-stabilized and boasts a dense and highly crystalline structure. This material offers superior heat aging performance in air, making it a reliable choice for bearings and other mechanical parts that are subject to wear and that operate at high temperatures for extended periods of time.Features:Heat-stabilizedHighly dense, crystalline structureSuperior heat aging performance in airBenefits:Reliable wear resistance and performance at service temperatures over 60°C (140°F)Ideal for use in bearings and other mechanical parts that are subject to wear and that operate at high temperatures for extended periods of timeApplications:Bearings and other mechanical parts in high temperature environmentsIndustrial machinery and equipmentAutomotive and transportation industriesOther applications where heat and wear resistance are critical factors.

Fluorosint® 135 is an advanced polymer material that combines the excellent chemical resistance, low friction and high temperature properties of PTFE (polytetrafluoroethylene) with the added low coefficient of friction, strength, stiffness and high pressure velocity capabilities. This material is designed to excel in demanding applications where high performance and reliability are required.Key features:Low coefficient of friction: provides excellent wear and deformation resistanceHigh strength and stiffness: provides superior mechanical performance at elevated temperaturesPTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Low coefficient of friction, making it ideal for seals, bearings, and washer applicationsImproved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Low friction seals, bearings and washer applicationsHigh-performance wear applications where extreme conditions are present such as high temperature, pressure and chemical exposureComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high chemical resistance, low friction, and high temperature properties such as valves, pumps, and heat exchangers.Fluorosint® 135 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. It's also important to mention that the temperature and chemical resistance can vary depending on the grade of PTFE used as well as other additives, always consult with the manufacturer for the exact properties of the final material.

KyronMAX® S-4240 is an advanced polymer material that combines the excellent strength, stiffness, and thermal resistance of PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPPA base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is neededKyronMAX® S-4240 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries. Please note that no stock shapes are offered. It's important to mention that the carbon fiber content can vary, always consult with manufacturer for the exact content and its effect on the properties of the final material.

Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.

Acetron® POM-H / Ertacetal® H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, and hardness, making it the ideal choice for a wide range of demanding applications. Its superior creep resistance and low thermal expansion rate make it stand out from copolymer acetal grades, making it the go-to material for small diameter, thin-walled bushings, bearings, gears, electrical components, medical and diagnostic equipment, valves, and fluid handling components.Features:Superior mechanical strength, stiffness, and hardnessExceptional creep resistanceLow thermal expansion rateHigh wear resistanceBenefits:Durable and long-lasting performanceEasy installation and removal with minimal distortionHigh resistance to chemical wearHigh impact strength, even at low temperaturesExcellent dimensional stabilityApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components