Browse Products by Market

Browse Products by Technology

Products

Brands

Formulations

Documents

Experts

MOCOM is a global compounder of thermoplastic polymers. The company with its headquarter in Hamburg, Germany, offers the plastics processing industry a comprehensive range of high-performance customized and standard compound solutions. The high performance and engineering compounds are complimented by the recyclate based compounds which deliver Near-To-Prime properties. MOCOM supplies a wide range of industries including Automotive, Electrical and Electronics, Home and Garden, Sports and Leisure, Transportation, and Healthcare. As part of the Otto Krahn Group, MOCOM currently employs around 800 people. It has production sites in Duncan, South Carolina (USA), three German locations (Hamburg, Erlenbach, Zülpich) as well as in Changshu (China). For more information visit <a href="https://www.mocom.eu/en" rel="noopener noreferrer" target="_blank">mocom.eu/en</a>&nbsp;

Sales

I support all stages of Business Development, from concept, to design, tooling, manufacturing, processing, and material selection.

Please reach out to me with any questions, I am happy to assist you in finding the right product or learning more about our storefront

As an expert in plastics with 10 years of experience and certified as a Master Molder, I can support you in all stages of Business Development.

Business Development Manager

With 22 Years of compounding experience I have the knowledge in resin selection and filler technology to be your material expert in any market segment

Business Development

ALCOM® MED PA66 1000 19046 has a minimum shelf life of 24 months and should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, 

ALCOM® MED PA66 1000 19046

Altech® ECO PA66 1000/561 is a polyamide 66 base polymer with impact modification and the inclusion of recycled material, making it suitable for applications in the automotive

ALTECH® ECO PA66 1000/561

Low CO2-footprint due to use of recycling feedstock
Near-To-Prime® performance and quality
Broad product portfolio, tailor-made properties
Technical datasheet and specificatio

ALTECH® ECO PC+ABS 1000/106

Altech® ECO PC+ABS 1000/500 is a polycarbonate + acrylonitrile butadiene styrene blend that contains recycled material.

ALTECH® ECO PC+ABS 1000/500

Altech® PP-H A 2040/556 GF40 CP is a polypropylene homopolymer injection molding grade with 40% glass fibers, heat-stabilized, processing-stabilized, low emission ...

ALTECH® PP-H A 2040/556 GF40 CP

Privacy

Terms & Conditions

Terms of Sale

Cookie Policy

ALTECH® ECO

ALTECH

ALCOLOR

ALFATER® XL

CELLIDOR

TEDUR

ALCOM

ALCOM® MED

WIPAFLEX

MOCOM Compounds ALTECH® PP-H A 4920/180 MR20 is a polypropylene homopolymer with 20% talcum, which offers hot water resistance, good chemical resistance, heat stability, easy release (demolding), and good flow. It is designed for injection molding with a melt temperature of 200-250°C and mold temperature of 20-70°C. Pre-drying conditions should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. This material is suitable for applications in the building and construction and automotive industry, such as interior decoration/finishing, injection molded parts and housings, fixing elements, and functional components.

ALTECH® PP-H A 4920/180 MR20

MOCOM Compounds ALCOM® LB ABS 1000 15018 WT1029-15 is a pre-dried acrylonitrile/butadiene/styrene/copolymer containing a special filler, designed for highly reflective and opaque automotive and lighting components such as light guides and reflectors. It should be processed with a melt temperature of 220-260°C and a mold temperature of 50-80°C. The maximum moisture content should not exceed 0.02%.

ALCOM® LB ABS 1000 15018 WT1029-15

MOCOM Compounds ALCOLOR® Function PA AO A WT1114-15 is a 6% dosage injection molding colorant for use in Polyamide with a base polymer of Polyamide, a light fastness colorant of blue woolscale 8, a filler/additive system of light stabilizer, a color of white, special features of being UV stabilized, free from cadmium, lead and diarylide pigments, dust-free, with a high additive content and high dispersibility, for use in various building and construction applications, such as door handles.

ALCOLOR® Function PA AO A WT1114-15

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16156 GY1118-16 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features the properties of being translucent, light scattering, high light diffusion, and having good flow characteristics. It is approved by GS93016 and is suitable for Automotive and Lighting market segments, with typical applications such as lamp covers, display elements, and operating elements. For injection molding processing, the recommended melt temperature is 270-310°C and the mold temperature should be 80-110°C. When storing this material, it should be kept dry and protected from light.

ALCOM® LD2 PC 1000 UV 16156 GY1118-16

MOCOM Compounds ALTECH® PS-HI A 1000/901 WT1260-20 is a polystyrene base polymer with impact-easy release (demolding) properties, designed for injection molding grade applications. It is suitable for use in the Automotive, electrical and electronic, and building and construction market segments, to make injection molded parts such as bezels and housings. Pre-drying conditions should be done in a dry air (dessiccant) dryer at 60-80°C for 2-3 hours, or in an air circulating dryer at 60-80°C for 2-3 hours. Processing injection molding should be done with a melt temperature of 180-260°C and a mold temperature of 10-70°C.

ALTECH® PS-HI A 1000/901 WT1260-20

MOCOM Compounds TEDUR® L 9523 is a polyphenylene sulfide base polymer with a 60% glass fiber/mineral filler/additive system, which is black in color. It has high stiffness, improved surface appearance, and is suitable for various applications such as reflectors. Pre-drying conditions should be done in a dry air (dessiccant) dryer at 130-140°C for two to four hours depending on moisture content. For processing injection molding, the melt temperature should be 320-340°C and the mold temperature should be greater than 140°C.

TEDUR® L 9523

MOCOM Compounds ALCOLOR® Function ABS IM LS A WT3056-10 is a white colorant, similar to RAL 9003, with a dosage of 9.0% for extrusion and injection molding, depending on wall thickness and required color intensity and application and operational area. It contains a Laser sensitive additive and a blue woolscale 8 Light Fastness colorant, and is based on Acrylonitrile/Butadiene/Styrene/Copolymer. It is laser etchable (dark etching), impact modified, high additive content, free from cadmium, lead, and diarylide pigments, and has high dispersibility and is dust-free. It is suitable for Automotive, Machinery, electrical and electronic, Furniture, building and construction, and sport and leisure applications, for injection molded parts, extruded parts, and compounding.

ALCOLOR® Function ABS IM LS A WT3056-10

MOCOM Compounds ALCOM® PC 740/4 UV WT1201-08LD is a polycarbonate base polymer with a special filler/additive system offering translucency, light scattering, high light diffusion, and UV stabilization, as well as easy flow properties. It is primarily used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements, and is approved by GS93016. This polymer is injection molded at a melt temperature range of 270-310°C and a mold temperature range of 80-110°C.

ALCOM® PC 740/4 UV WT1201-08LD

MOCOM Compounds ALTECH® PBT A 1000/100 is a special heat-stabilized Polybutylene Terephthalate base polymer with good flow used for various injection-molded parts. The recommended processing injection-molding melt temperature is 250-270°C and mold temperature 40-70°C. After use, it should be stored dry, in a dark place, and not above 30°C.

ALTECH® PBT A 1000/100

MOCOM Compounds

MOCOM is a global compounder of thermoplastic polymers. The company with its headquarter in Hamburg, Germany, offers the plastics processing industry a comprehensive range of high-performance customiz

MOCOM - Thermoplastic Polymer - High Performance - ISO 17025

Website

LinkedIn

ALCOLOR® ABS A GY77-4060 (DE) Technical Data Sheet

ALCOLOR® ABS A GY77-4060 (DE) Technical Data Sheet - MOCOM Compounds - Knowde

Job Title

Shipping Terms

Name

and the data associated with it — permanently.

This is a Premium Feature

Changes to filters have not been applied.

Discard changes?

{userCompanyName} notice

In order to join {userCompanyName} on Knowde, you must use your business email address.

Business already on Knowde

{userCompanyName} requires all users on {companyName} to register with their business email address to ensure confidentiality and security.

{userCompanyName} requires registering your business email address

There's only a little ways to go.

Creating an account is free and the only way to directly download documents, order samples, request quotes and use direct messaging.

Quit Sign Up?

Tell us about {userCompanyName}

from concierge@knowde.com

Click the link in the email, or enter the 6-digit code

Verification email sent

Since you’re using a personal email address, we require proof to verify the information you have provided.

Please verify your account

Please go back and enter in an email address that is directly associated with a business.

Knowde is built for businesses

Also, using a personal email for creating your {companyName} account may require additional verification of your company details.

We recommend signing up with a work email address to get faster responses, especially when requesting samples, documents, and more.

Please enter your business email address below.  We’ll send you a confirmation code to quickly verify.

Enter your business email

{companyName} uses Knowde for account management so you can manage all of your sample requests, RFQs, orders and more in one place.

Knowde is for businesses, you may have a hard time receiving responses to your requests if you use a personal email address.

to {email}

We sent an email to {email}

Please click the link to reset your password

Check your email

Create a new password

Password expired

Sign in to {companyName}

Enter a new secure password

Change your password

Enter the email address associated with your account

Reset your password

Enter your password for

Use your Knowde password to sign in:

Please provide additional information to help us verify your company.

Terms and Conditions

Compare multiple products at once and find the best fit for your project needs.

Why is this important?

Enter your password

Unlock your account

Knowde is the world’s biggest marketplace to search for ingredients, polymers, and chemistry. You can:

Welcome to Knowde

View All Products

Cart

Please fix the following before proceeding to payment

An order receipt has been emailed to {email}

Order

This feature is currently unavailable at this screen size.

Payment

Shipping

Checkout

KEEP IN MIND

You will lose any existing chat history by starting a new chat.

Start a new chat?

Compare Products

This document is restricted content.

If you believe you should have permission to this document, please request access.

Restricted Access

It only takes 60 seconds to create an account.

Available {documentType} documents for this product ({counter})

Describe Documents You’d Like to Request

Invalid job title

That’s not the reaction we were expecting.

Page not found - Store for chemicals, polymers and ingredients

Internal Server Error - Store for chemicals, polymers and ingredients

Unexpected error occurred. Please contact us.

Client Side Exception - Store for chemicals, polymers and ingredients

Show products with

Filters

Featured Products

Flavor & Taste Explorer

Flavor Families

Enter your inquiry here, include as much detail as you’re able. *

To submit an inquiry to {companyName}, please fill out the form below and click Submit. They will get back to you as soon as they’re able.

Home Page

Request samples, documents, and quotes directly from suppliers

{companyName} experts - Knowde

Knowde is the first marketplace for chemicals, polymers and ingredients. Our leading-edge digital capabilities connect thousands of suppliers and customers every day.

Chemicals Marketplace - ingredients & raw materials - Knowde

Learn how to take full advantage of the free to use tools that you have unlocked.

Explore the capabilities of the platform and get immediate assistance for your needs with one of our experts.

Schedule a Demo

You’ll meet with Kiana from our Knowde Marketplace Team

Explore the capabilities of the platform and get immediate assistance for your needs.

Learn how you can make the most of the free tools now available to you.

Explore the capabilities of the platform with our dedicated team.

Weekly Webinar

See which others might better fit your needs.

This is just one of {allProducts} products on Knowde.

BROWSE BY

Knowde for Suppliers

Most popular categories

Gain instant access to our marketplace of over 250,000 chemicals, ingredients and polymers from 8,000 suppliers. Browse, search, and filter to quickly compare products, find information, request documents, order samples, and get quotes directly from suppliers.

Search and filter over 250,000 chemicals, ingredients and polymers, access documents and download starter formulations. Interact with over 8,000 suppliers whose representatives are ready to help. Sign up for a free Knowde Marketplace account today.

Create a free account to gain instant access to our marketplace of over 250,000 products and their documents.

Get new products to market faster with a free Knowde Marketplace account

The fastest way to find the right raw materials for your products

Want to explore more products?

Popular {companyName} Products

Start Order

Get a Quote

{price} each for {name}

1 of {brandProductsCount} products in this brand

This will be used for any follow-up questions so we can best meet your needs

Please fill out the form below to help {companyName} prepare your quote

Your request has been sent to {companyName}

This information will help us get you the right materials.

All Categories

{numberOfResults, plural, one {Brand} other {Brands}}

{numberOfResults, plural, one {Product} other {Products}}

Search Tips

{charactersCounter}/{limitCharacters} Characters

Visit

Your account has been verified. You now have access to the full power of {companyName}

The quantity your business will require annually, if the sample product suits your project's needs.

ALCOLOR® ABS A GY77-4060 (DE) Technical Data Sheet

Technical Data Sheet

Lonnie Tough Jr

Blaine Priebe

Salvador Ramiro Gonzalez Vaca

Jack Chiang

Mike Najjar