Browse Products by Market

Browse Products by Technology

Products

Brands

Formulations

Documents

Experts

MOCOM is a global compounder of thermoplastic polymers. The company with its headquarter in Hamburg, Germany, offers the plastics processing industry a comprehensive range of high-performance customized and standard compound solutions. The high performance and engineering compounds are complimented by the recyclate based compounds which deliver Near-To-Prime properties. MOCOM supplies a wide range of industries including Automotive, Electrical and Electronics, Home and Garden, Sports and Leisure, Transportation, and Healthcare. As part of the Otto Krahn Group, MOCOM currently employs around 800 people. It has production sites in Duncan, South Carolina (USA), three German locations (Hamburg, Erlenbach, Zülpich) as well as in Changshu (China). For more information visit <a href="https://www.mocom.eu/en" rel="noopener noreferrer" target="_blank">mocom.eu/en</a>&nbsp;

Sales

I support all stages of Business Development, from concept, to design, tooling, manufacturing, processing, and material selection.

Please reach out to me with any questions, I am happy to assist you in finding the right product or learning more about our storefront

As an expert in plastics with 10 years of experience and certified as a Master Molder, I can support you in all stages of Business Development.

Business Development Manager

With 22 Years of compounding experience I have the knowledge in resin selection and filler technology to be your material expert in any market segment

Business Development

ALCOM® MED PA66 1000 19046 has a minimum shelf life of 24 months and should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, 

ALCOM® MED PA66 1000 19046

Altech® ECO PA66 1000/561 is a polyamide 66 base polymer with impact modification and the inclusion of recycled material, making it suitable for applications in the automotive

ALTECH® ECO PA66 1000/561

Low CO2-footprint due to use of recycling feedstock
Near-To-Prime® performance and quality
Broad product portfolio, tailor-made properties
Technical datasheet and specificatio

ALTECH® ECO PC+ABS 1000/106

Altech® ECO PC+ABS 1000/500 is a polycarbonate + acrylonitrile butadiene styrene blend that contains recycled material.

ALTECH® ECO PC+ABS 1000/500

Altech® PP-H A 2040/556 GF40 CP is a polypropylene homopolymer injection molding grade with 40% glass fibers, heat-stabilized, processing-stabilized, low emission ...

ALTECH® PP-H A 2040/556 GF40 CP

Privacy

Terms & Conditions

Terms of Sale

Cookie Policy

ALTECH® ECO

ALTECH

ALCOLOR

ALFATER® XL

CELLIDOR

TEDUR

ALCOM

LUPOLEN

ALCOM® MED

MOCOM Compounds ALTECH® ABS A 1000/670 is a Acrylonitrile/Butadiene/Styrene/Copolymer with good flow and processing stability. It is suitable for processing in injection molding with melt temperatures of 200-240°C and mold temperature of 50-80°C, and is suitable for applications in Medical/Personal Care, Packaging, Interior Decoration/Finishing, Hygiene products, and various injection molded parts. Pre-drying Conditions are 80°C in an air circulating dryer for 3-6 h, 80°C in a dry air (dessiccant) dryer for 2-4 h depending on moisture content with a maximum moisture content of &lt;0.20%. To ensure the best results, it should be stored in a dry and light-protected environment at a temperature not exceeding 30°C.

ALTECH® ABS A 1000/670

MOCOM Compounds ALTECH® PP-H FC 2020/100.01 is a polypropylene homopolymer reinforced with 20% glass fibers. It is suitable for injection molding at a melt temperature of 200-250°C and a mold temperature of 20-70°C, with features such as easy release (demolding), processing stability, and heat stability. This product is suitable for building and construction, packaging, food contact, household goods, thin walled parts, and kitchenware applications.

ALTECH® PP-H FC 2020/100.01

MOCOM Compounds ALTECH® PP-H A 2020/100 GF20 is a polypropylene homopolymer with 20% glass fibers, offering easy release (demolding), slip agent, and heat stabilized properties. It is suitable for furniture and various injection molded parts applications. Pre-drying conditions should include drying in an air circulating dryer at 80-120°C for 2-4 hours and in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours. For injection molding, the melt temperature should be between 200-250°C and the mold temperature should be between 20-70°C. Additionally, the material should be stored dry and in a place where the temperature does not exceed 30°C and is protected from light.

ALTECH® PP-H A 2020/100 GF20

MOCOM Compounds ALCOM® MED PS 1000 04001 has a minimum shelf life of 24 months. Pre-drying conditions include in an air circulating dryer between 60-80°C for 2-3 hours, or in a dry air (dessiccant) dryer between 60-80°C for 2-3 hours depending on the moisture content. Processing injection molding requires a melt temperature between 180-260°C and a mold temperature between 10-70°C. The base polymer is Polystyrene and it is typically used for various applications such as consumer goods, food packaging, medical devices, and more.

ALCOM® MED PS 1000 04001

MOCOM Compounds ALCOM® PC 740/4 CC1122-05LD is a polycarbonate-based polymer with a special filler/additive system that provides high light transmission and light scattering as well as good flow. It is approved by GS93016 and is typically used in automotive and lighting applications such as lamp covers, display elements, and operating elements. For injection molding, the recommended melt temperature is between 270-310°C and the mold temperature should be between 80-110°C. This product should be stored in a dry place and protected from light.

ALCOM® PC 740/4 CC1122-05LD

MOCOM Compounds ALTECH® ECO PP-B 4920/570 MR 20 is a polypropylene heterophasic copolymer containing 20% talcum, slip agent, easy release (demolding), and heat stabilized with special features containing recycled material. It is suitable for the machinery market segment and typical applications such as air ducts, housing, and unpainted automotive trim parts for various injection molding.

ALTECH® ECO PP-B 4920/570 MR 20

MOCOM Compounds ALTECH® PP-B B 4915/500 MR15 is a heat-stabilized and processing-stabilized polypropylene heterophasic copolymer blended with 15% talcum. It is suitable for injection molding with a melt temperature between 200-250°C and a mold temperature between 20-70°C, making it ideal for applications in the automotive industry for interior decoration/finishing, clothing/fasteners, and functional components, housings. Pre-drying should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. This product should be stored in a dry and light-protected environment not exceeding 30°C.

ALTECH® PP-B B 4915/500 MR15

MOCOM Compounds ALCOM® LB ECO PC 1000 17152 UV IM WT2083-07 is a polycarbonate base polymer, which is impact modified, UV stabilized, and contains recycled material. It is suitable for electrical and electronic, lighting, and various other applications such as light guides, lamps, sockets, etc. It can be processed through injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

ALCOM® LB ECO PC 1000 17152 UV IM WT2083-07

MOCOM Compounds ALTECH® PC A 1000/608 WT1005-17LWA is a polycarbonate injection molding grade with laser optimization, easy release (demolding), good flow, and processing stabilized special features. It is used in the automotive, electrical, and electronic market segments, typically in lighting and electrical components applications. Pre-drying conditions should include 120°C in a dry air (dessiccant) dryer for 2-3 hours, and in an air circulating dryer 100-120°C for 4-12 hours depending on the moisture content, with a maximum moisture content of less than 0.02%. Processing injection molding should be done with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

ALTECH® PC A 1000/608 WT1005-17LWA

MOCOM Compounds

MOCOM is a global compounder of thermoplastic polymers. The company with its headquarter in Hamburg, Germany, offers the plastics processing industry a comprehensive range of high-performance customiz

MOCOM - Thermoplastic Polymer - High Performance - ISO 17025

Website

LinkedIn

ALTECH® ABS A 2020/906 (DE) Technical Data Sheet

ALTECH® ABS A 2020/906 (DE) Technical Data Sheet - MOCOM Compounds - Knowde

Job Title

Shipping Terms

Name

and the data associated with it — permanently.

This is a Premium Feature

Changes to filters have not been applied.

Discard changes?

{userCompanyName} notice

In order to join {userCompanyName} on Knowde, you must use your business email address.

Business already on Knowde

{userCompanyName} requires all users on {companyName} to register with their business email address to ensure confidentiality and security.

{userCompanyName} requires registering your business email address

There's only a little ways to go.

Creating an account is free and the only way to directly download documents, order samples, request quotes and use direct messaging.

Quit Sign Up?

Tell us about {userCompanyName}

from concierge@knowde.com

Click the link in the email, or enter the 6-digit code

Verification email sent

Since you’re using a personal email address, we require proof to verify the information you have provided.

Please verify your account

Please go back and enter in an email address that is directly associated with a business.

Knowde is built for businesses

Also, using a personal email for creating your {companyName} account may require additional verification of your company details.

We recommend signing up with a work email address to get faster responses, especially when requesting samples, documents, and more.

Please enter your business email address below.  We’ll send you a confirmation code to quickly verify.

Enter your business email

{companyName} uses Knowde for account management so you can manage all of your sample requests, RFQs, orders and more in one place.

Knowde is for businesses, you may have a hard time receiving responses to your requests if you use a personal email address.

to {email}

We sent an email to {email}

Please click the link to reset your password

Check your email

Create a new password

Password expired

Sign in to {companyName}

Enter a new secure password

Change your password

Enter the email address associated with your account

Reset your password

Enter your password for

Use your Knowde password to sign in:

Please provide additional information to help us verify your company.

Terms and Conditions

Compare multiple products at once and find the best fit for your project needs.

Why is this important?

Enter your password

Unlock your account

Knowde is the world’s biggest marketplace to search for ingredients, polymers, and chemistry. You can:

Welcome to Knowde

View All Products

Cart

Please fix the following before proceeding to payment

An order receipt has been emailed to {email}

Order

This feature is currently unavailable at this screen size.

Payment

Shipping

Checkout

KEEP IN MIND

You will lose any existing chat history by starting a new chat.

Start a new chat?

Compare Products

This document is restricted content.

If you believe you should have permission to this document, please request access.

Restricted Access

It only takes 60 seconds to create an account.

Available {documentType} documents for this product ({counter})

Describe Documents You’d Like to Request

Invalid job title

That’s not the reaction we were expecting.

Page not found - Store for chemicals, polymers and ingredients

Internal Server Error - Store for chemicals, polymers and ingredients

Unexpected error occurred. Please contact us.

Client Side Exception - Store for chemicals, polymers and ingredients

Show products with

Filters

Featured Products

Flavor & Taste Explorer

Flavor Families

Enter your inquiry here, include as much detail as you’re able. *

To submit an inquiry to {companyName}, please fill out the form below and click Submit. They will get back to you as soon as they’re able.

Home Page

Request samples, documents, and quotes directly from suppliers

{companyName} experts - Knowde

Knowde is the first marketplace for chemicals, polymers and ingredients. Our leading-edge digital capabilities connect thousands of suppliers and customers every day.

Chemicals Marketplace - ingredients & raw materials - Knowde

Learn how to take full advantage of the free to use tools that you have unlocked.

Explore the capabilities of the platform and get immediate assistance for your needs with one of our experts.

Schedule a Demo

You’ll meet with Kiana from our Knowde Marketplace Team

Explore the capabilities of the platform and get immediate assistance for your needs.

Learn how you can make the most of the free tools now available to you.

Explore the capabilities of the platform with our dedicated team.

Weekly Webinar

See which others might better fit your needs.

This is just one of {allProducts} products on Knowde.

BROWSE BY

Knowde for Suppliers

Most popular categories

Gain instant access to our marketplace of over 250,000 chemicals, ingredients and polymers from 8,000 suppliers. Browse, search, and filter to quickly compare products, find information, request documents, order samples, and get quotes directly from suppliers.

Search and filter over 250,000 chemicals, ingredients and polymers, access documents and download starter formulations. Interact with over 8,000 suppliers whose representatives are ready to help. Sign up for a free Knowde Marketplace account today.

Create a free account to gain instant access to our marketplace of over 250,000 products and their documents.

Get new products to market faster with a free Knowde Marketplace account

The fastest way to find the right raw materials for your products

Want to explore more products?

Popular {companyName} Products

Start Order

Get a Quote

{price} each for {name}

1 of {brandProductsCount} products in this brand

This will be used for any follow-up questions so we can best meet your needs

Please fill out the form below to help {companyName} prepare your quote

Your request has been sent to {companyName}

This information will help us get you the right materials.

All Categories

{numberOfResults, plural, one {Brand} other {Brands}}

{numberOfResults, plural, one {Product} other {Products}}

Search Tips

{charactersCounter}/{limitCharacters} Characters

Visit

Your account has been verified. You now have access to the full power of {companyName}

The quantity your business will require annually, if the sample product suits your project's needs.

ALTECH® ABS A 2020/906 (DE) Technical Data Sheet

Technical Data Sheet

Lonnie Tough Jr

Blaine Priebe

Salvador Ramiro Gonzalez Vaca

Jack Chiang

Mike Najjar