Products

WIPELAST TV 20 BK UV is a black composite material with a base of polypropylene-EPDM and 20% talc filler, specifically designed for use in the automotive market segment. It has been UV-stabilized to enhance its performance under UV exposure. To achieve optimal processing conditions, the material must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to ensure a maximum moisture content of 0.10%.

MOCOM Compounds ALFATER® XL A60I 2UV0000 UV is a thermoplastic vulcanisate (PP+EPDM) with natural color and UV stabilization, suitable for injection molding. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, making it suitable for applications such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners and connectors, and 2K components. Additionally, it has excellent adhesion to various materials.

WIPAFLEX TV 10 BK UV is a black composite material suitable for various automotive market segments. It contains polypropylene-polyethylene-EPDM as the base polymer and 10% talc filler. To achieve optimal processing conditions, it must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to ensure a maximum moisture content of 0.10%. The recommended processing method is injection molding, with a melt temperature range of 200-270°C and a mold temperature range of 20-60°C.

WIPELAST TV 30 BK UV is a black polypropylene-EPDM composite material with 30% talc filler and UV stabilizers, specifically designed for use in the automotive industry. Prior to processing, the material must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to achieve a maximum moisture content of 0.10%. During processing, the melt temperature should be maintained at 200-270°C, with a mold temperature of 20-60°C during injection molding.

WIPELAST TV 10 BK UV is a black composite material suitable for various automotive market segments. It consists of polypropylene-EPDM as the base polymer and 10% talc filler. The material is UV stabilized, which is its special feature. To achieve optimal processing conditions, it must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to ensure a maximum moisture content of 0.10%. The material is recommended for processing using injection molding, with a melt temperature of 200-270°C and a mold temperature of 20-60°C.

MOCOM Compounds ALCOM® LD2 MBS 1000 UV 18013 WT1021-18 is a polystyrene copolymer that is translucent, has high light diffusion, light scattering, good flow, processing stabilized, and UV stabilized. It is an injection molding grade suitable for use in the automotive and lighting market segments and is typically used for lamp covers, display elements, and operating elements.